Manual.ly Logo

iHealth PT3 Manual

0.0 · 0 Ratings

PDF manual · 20 Pages

English

M: QW-35-FL
page

/ 20

Loading...
4cf4f53371947aa49ee0b3fb2836013db6e7 page 3
2 3
LED screen instructions
Temperature
display area
Celsius
Fahrenheit
Low power
reminder
Device dimensions: 5.39 in x 1.34 in x 1.54 in
Screen dimensions: 1.01 in x 0.75 in
Product weight: 90 g
Product performance
1. Measurement position: Centre of the forehead surface
2. Measurement distance: ≤1.18in(3 cm)
3. Power source: DC 3V; 2 x 1.5V AAA batteries
4. Measurement range: 89.6℉-109.2℉(32℃-42.9℃)
5. Measurement precision: ±0.4℉ within 95℉-107.6℉,
and±0.5℉ for other temperature ranges.
6. Resolution: 0.1℉
7. Clinical reproducibility: Within ±0.5℉
8. Operating conditions:
Temperature: 59℉-104℉(15℃-40℃)
Humidity: 15-85%RH, non-condensing
Atmospheric Pressure: 70~106kPa
9. Operation mode:
Adjusted mode: forehead
Direct mode: surface mode
10. Expected service life: 2 years
11. Reference Body Site: Oral
12. Software version: V1.0
1. This product is a precision device. Return the product to its
original packaging for proper storage after use. To ensure
accurate measurements, avoid the device or probe
contacting any liquid or droplets. Avoid tiny particles (such
as dust or powder) falling into the probe.
2. Avoid dropping or subjecting the product to external
forces. Do not disassemble or re-assemble the product on
your own.
3. Do not directly touch the probe with your ngers or blow
on it. Measurements taken using a damaged or dirty IR
probe may be inaccurate.
4. Keep the product at a place inaccessible to children to
prevent children from swallowing the batteries or small
parts.
5. Do not throw the thermometer or batteries into re to
prevent explosions.
6. Remove the batteries from the thermometer if the device
will not be used for more than one month.
7.If you are allergic to plastic/rubber, please don’t use this
device.
8.The materials (ABS, TPU, metal) of expect contact with
patient had passed the ISO 10993-5 and ISO 10993-10
standards test, no toxicity, allergy and irritation reaction.
They are in compliance with the MDD requirements.
Based on the current science and technology, other
potential allergic reactions are unknown.
(2) About the product
measurement accuracy. We recommend taking only up to
3 continuous readings within a short period.
10. Do not directly face the sun or an air outlet of an air
conditioning or radiator device during the measurement
as this will cause changes to the forehead temperature.
Measurements should be taken in a stable environment
where possible.
11. Do not measure body temperature in an environment
with strong EM interference (examples include places
close to a working microwave, induction cooker, or
cellphone in-use) as EM interference may cause errors in
the reading or even device failure.
12. This product should be considered a personal device.
Clean and sanitize the product properly to prevent cross
contamination.
13. To clean a dirty thermometer probe, gently swipe the
probe using a cotton swab dipped in 75% alcohol. Let the
cleaned thermometer sit for at least 15 minutes before
taking more measurements.
14. This infrared thermometer meets requirements
established in ASTM Standard (E1965-98) Except of clause
5.2.2. It displays subject’s temperature over a range of 89.6
℉~109.2℉. Full responsibility for the conformance of this
product to the standard is assumed by (manufacturer:
Famidoc Technology Co., Ltd. Add:
No. 212 Yilong Road, Hexi Industrial Zone, Jinxia, Changan
Town, Dongguan 523853, Guangdong Province, China.)
LED display
area
Thermometer
probe
Distance
probe
Battery cover
Measurement
button
Overall Description
ASTM laboratory accuracy requirements in the display range
of 98°F to 102°F(37℃) for IR thermometers is ±0.4°F(±0.2℃),
whereas for mercury in-glass and electronic thermometers,
the requirement per ASTM Standards E667-86 and E1112-86
is ±0.2°F(±0.1℃).
The thermometer is mainly comprised of a plastic casing, IR
temperature sensor, MCU, vibration motor, LED display screen
and batteries.

Chat with your iHealth PT3 manual using AI

Get instant AI answers from your iHealth PT3 manual

Ask anything about the iHealth PT3. Answers come from this manual, with the pages they are based on.

PT3 Maintenance Schedule

Remind me when maintenance is due
If not used for more than one month
Remove batteries if stored for over a month

Take out the batteries from the thermometer if the device will not be used for more than one month to prevent damage.

As needed / Before use
Clean the IR probe with alcohol swab

Gently swipe the probe surface with a cotton swab dipped in >75% medical alcohol. Let it sit for at least 15 minutes before measuring.

As needed
Wipe exterior and screen with soft dry cloth

Use a soft, dry cloth to clean the display and external surface. If very dirty, moisten the cloth slightly with medical alcohol.

When low battery symbol appears
Replace batteries when capacity is low

Replace old batteries with new ones when the low power symbol flashes or device fails to measure. Ensure correct polarity.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend PT3?

Yes No

Frequently Asked Questions

A

Turn off the device. Press and hold the measurement button for 8 seconds until both symbols flash. Press the button once to select your preferred unit, then hold for 8 seconds again to confirm.

Is this answer helpful?

A

Yes, the iHealth PT3 is safe for babies, children, and adults. However, infants and young children should not operate the device themselves; an adult must take the measurement.

Is this answer helpful?

A

Ensure the forehead is clean and dry, and wait 30 minutes after eating or exercising. Check the battery level and ensure the device has acclimated to the room temperature. Repeat the measurement up to three times.

Is this answer helpful?

A

Batteries typically last for about 300 measurements. Replace them immediately if the low battery icon appears or if the device fails to power on correctly.

Is this answer helpful?

A

No, the device is not waterproof. Do not submerge it in water or use detergents. Clean the exterior with a soft cloth slightly dampened with alcohol.

Is this answer helpful?

A

The warranty period is one year from the date of delivery. Proof of purchase is required for any claims under the warranty terms.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Non-contact measurement ensures hygiene and prevents cross-contamination between users.
  • Fast reading time provides instant results with a simple beep and vibration alert.
  • Dual unit support allows easy switching between Celsius and Fahrenheit for global use.
VS

Disadvantages

  • Accuracy can be affected by environmental factors like direct sunlight or strong EM interference.
  • Requires regular battery replacement as the typical lifespan is around 300 measurements.
  • Not suitable for measuring temperature over scar tissue or areas with inflammation.
M: QW-35-FL

Product Specification

Type

Infrared Thermometer

Power Source

Battery Powered (2x AAA Battery)

Application

On Forehead

Units

°C, °F (Switchable)

Measurement Range

89.6°F to 109.2°F (Body Temperature)

Accuracy

±0.54°F

Measurement Time

1s

Display

Yes

Features

Auto Power Off

M: QW-35-FL

Product Description

Discover the iHealth PT3 Infrared Thermometer

The iHealth PT3 is a cutting-edge infrared thermometer designed to provide quick, non-contact temperature readings for the entire family. This high-tech device measures body heat by detecting infrared energy emitted from the forehead, ensuring a hygienic and efficient way to monitor health conditions. Whether you are checking on a sleeping child or assessing your own well-being, this tool offers peace of mind with its user-friendly design.

Key Features and Performance

This device operates within a measurement range of 89.6°F to 109.2°F (32°C to 42.9°C), making it suitable for detecting fevers accurately. The precision is set at ±0.4°F within the critical range of 95°F to 107.6°F. It features an LED display that shows readings in both Celsius and Fahrenheit, allowing users to switch units easily by holding the measurement button. The thermometer runs on two AAA batteries and includes a low-power indicator to ensure reliability when needed.

Usage and Safety

To use the iHealth PT3, simply aim the probe at the center of the forehead from a distance of approximately 1.18 inches (3 cm). The device vibrates upon successful measurement, providing immediate feedback. For accurate results, ensure the forehead is free from sweat, cosmetics, or dirt, and avoid measuring immediately after eating, drinking, or physical activity. The product is intended for consumer use only and should not replace professional medical advice.

Maintenance and Care

Cleaning the probe gently with a cotton swab dipped in 75% alcohol helps maintain accuracy. Avoid exposing the device to direct sunlight, extreme temperatures, or moisture. Always remove batteries if the device will not be used for more than a month to prevent leakage. The iHealth PT3 is built with durable materials that meet safety standards, ensuring no toxicity or irritation during contact.

Important Notes

  • Do not measure over scar tissue or open wounds.
  • Allow the device to acclimate to room temperature before use if moved from a different environment.
  • Keep out of reach of children to prevent accidental ingestion of batteries.
M: QW-35-FL

© Copyright 2026 Manual.ly