Manual.ly Logo

Holzmann TS305 Manual

4.3 · 16 Ratings

PDF manual · 12 Pages

English

M: OA-GPT-54-NAN
page

/ 12

Loading...
ff8f5c7a167f922614faf8d549095404352f page 7
ENGLISH
HOLZMANN Maschinen Austria www.holzmann-maschinen.at Seite 7
Bedienungsanleitung Tellerschleifmaschine TS 305
Dear customer!
This manual contains Information and important
instructions for the installation and correct use of
the HOLZMANN Disc sander TS 305.
This manual is part of the machine and may not
be stored separately from the machine. Save it for
later reference and if you let other persons use
the machine, add this instruction to the machine.
Please read and obey the security instruc-
tions!
Before first use read this manual care-
fully. It eases the correct use of the ma-
chine and prevents misunderstanding
and damages of machine and the user’s
health.
Due to constant advancements in product design
construction pictures and content may diverse
slightly. However, if you discover any errors, in-
form us please with the product feedback form.
Technical specifications are subject to changes!
Copyright
© 2010
This document is protected by international copy-
right law. Any unauthorized duplication, transla-
tion or use of pictures, illustrations or text of this
manual will be pursued by law – court of jurisdic-
tion is Rohrbach, Austria!
Customer Care Contact:
Holzmann Maschinen GmbH
Marktplatz 4
A-4170 Haslach
Tel.: +43 (0) 7289 61 116 503
Fax.: +43 (0) 7289 61 116 520
MO-FR 8:00-12:00 13:00-17:00 GMT +1
1 TECHNICAL DATA TS 305
Motor power (100%)
750W
Voltage
220V
Idle speed
1420/1700rpm
Worktable size
400x133mm
Disc diameter
305mm
max. sanding height
175mm
Worktable tilt
0-45°
net weight
24kg
gross weight
26kg
Sound pressure level L
pfa
88dB
Sound level L
wa
101dB
2 MACHINE DESCRIPTION
1
Fixing bolts sanding table
2
ON/OFF/EMERGENCY OFF Switch
3
motor
4
sanding disc cover
5
sanding disc
6
sanding table
7
mitre gauge
8
stand
In the course of continuous product development
technical data and product design is subject to
change.
3 PROPER USE
The HOLZMANN TS 305 disc sander is designed
for sanding small workpieces of wood and wood
composites. Any other use is deemed to be a
case of misuse.
The user/operator and not the manufacturer will
be held liable for damage and/or injuries of any
kind that result from such misuse.
To use the machine properly you must also ob-
serve the safety regulations, the assembly in-
structions and the operating instructions to be
found in this manual.
All persons who use and service the machine have
to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident pre-
vention regulations in force in your area.

Chat with your Holzmann TS305 manual using AI

Get instant AI answers from your Holzmann TS305 manual

Ask anything about the Holzmann TS305. Answers come from this manual, with the pages they are based on.

TS305 Maintenance Schedule

Remind me when maintenance is due
Every 3 months
Check angle accuracy of table and gauge

Verify the sanding table and mitre gauge are set to 90 degrees using a precise angle gauge. Readjust if the index does not match exactly.

After each use
Clean machine from dust

Disconnect power. Remove wood dust ideally with compressed air or a dry cloth, followed by a slightly damp cloth. Do not use aggressive cleaners.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend TS305?

Yes No
0
User Pic

Kristin Hirsch

10 months ago

How loud is this disc sander and does it vibrate much while grinding?

0
User Pic

Manual.ly

10 months ago

Customers report a very quiet and smooth running machine with low vibration. Because the unit is heavy (cast body) and has rubber feet, it stays stable on the workbench and vibrations are largely absorbed, resulting in a calm working sound. Several users specifically mention a quiet operation and almost vibration-free behavior during sanding. If you plan to use attachments/angle guides, just make sure everything is set firmly and aligned, so the workpiece and accessories do not introduce extra movement.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is designed for sanding small wooden workpieces and wood-based materials. It works especially well for edge finishing, bevels, and precise shaping tasks in a workshop setting.

Is this answer helpful?

A

Yes. The sanding table can be tilted from 0° to 45°, which helps with angled sanding and more flexible workpiece positioning.

Is this answer helpful?

A

It can be used by beginners only if they are properly trained and follow the safety instructions carefully. Protective equipment and correct feeding technique are very important.

Is this answer helpful?

A

Feed the workpiece so the disc moves from above into the material. Also avoid taking too deep a cut and do not sand pieces that are too short or too thin.

Is this answer helpful?

A

Routine cleaning, checking fasteners, and replacing worn sanding discs are the main tasks. The machine should always be disconnected from power before maintenance.

Is this answer helpful?

A

No. The machine is intended for indoor use only. It should be kept in a dry, clean, and well-ventilated workshop area.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • 305 mm disc and 750W motor provide solid sanding power for small workshop tasks.
  • Tilting table and mitre gauge support accurate edge work and angled sanding.
  • Maintenance is simple, with easy cleaning and straightforward sanding disc replacement.
  • Built-in emergency-off switch and clear safety guidance improve operator control.
VS

Disadvantages

  • Designed mainly for small workpieces, so it is not ideal for large stock removal.
  • Noise levels are noticeable, making hearing protection important.
  • Dust management is essential because sanding can create harmful fine particles.
  • Requires careful setup and trained use to avoid kickback and inaccurate results.
M: OA-GPT-54-NAN

Product Specification

Power

750 W

No-load speed

1,450 rpm

Disc diameter

12.01 in

Tool mounting

Hook and loop

Special features

Dust extraction, Angle stop

Weight

59.52 lb

M: OA-GPT-54-NAN

Product Description

Holzmann TS305 Electric Disc Sander: Compact Power for Precise Woodworking

The Holzmann TS305 Electric Disc Sander is built for woodworkers who want accurate edge shaping and smooth sanding in a compact machine. Designed for small workpieces made of wood and wood-based materials, it combines a 750W motor with a 305 mm sanding disc to deliver steady performance for workshop tasks that demand control rather than brute force. For anyone looking into the Holzmann TS305 Electric Disc Sander Manual, the key takeaway is that this machine is all about precision, safe handling, and consistent setup.

One of the most useful features of the TS305 is its adjustable sanding table, which tilts from 0° to 45°. This makes it practical for bevels, angled edges, and repeatable shaping tasks. The included mitre gauge helps keep workpieces aligned, while the large table surface supports stable feeding. With two operating speeds, the machine offers flexibility for different sanding needs, and the angle settings can be checked and fine-tuned for better accuracy over time.

Safety is a major part of the TS305 experience. The machine is meant to be used by trained users only, with proper eye, ear, and respiratory protection. The manual strongly emphasizes clean working conditions, stable placement, and correct feed direction so the sanding disc always moves from above the workpiece downward. That approach reduces kickback risk and helps achieve cleaner results. Because fine dust can be harmful, good ventilation and dust protection are not optional extras but essential habits.

Maintenance is straightforward, which is another advantage for busy workshops. Regular cleaning, checking fastening bolts, and replacing the sanding disc when worn are the main routine tasks. The machine is not designed for heavy disassembly, and repairs should be left to professionals. This keeps downtime low and helps the sander stay reliable over the long term.

Overall, the TS305 suits hobbyists and small professional shops that need a dedicated disc sander for detailed work. It is not a machine for oversized stock or aggressive material removal, but it shines when accuracy, repeatability, and safe operation matter most. For woodworking projects involving edges, corners, and small components, it offers a balanced mix of power and control.

Notes

  • Best for small wooden workpieces and wood composites.
  • Always verify table and gauge angles before precise sanding.
  • Use dust protection and hearing protection during operation.
  • Keep the machine on a stable surface and away from moisture.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly