Manual.ly Logo

FSP NanoFit Manual

0.0 · 0 Ratings

PDF manual · 28 Pages

English

M: OA-GPT-54-NAN
page

/ 28

Loading...
732090c92300dda57af1719fbf32fac65b9d page 1
Standby UPS
400VA/600VA/800VA
Inspection
The following items are inside the box:
●
UPS unit
●
User manual
Remove the UPS from its package and inspect it for damage that
may have occurred during shipping. If any damage is discovered,
re-pack the unit and return it to the place of purchase.
Connect to Utility Power
Connect AC power cord to utility power. Then, the UPS will start to
charge inside battery. For best result, charge the battery for 6 hours
prior to initial use.
Plug in Equipment
Battery Backup Outlets(3)
Connect computer and monitor to the "Battery Backup" outlets.
These outlets provide battery backup, EMI filtering, line
conditioning, and surge protection. Battery power is automatically
provided in case of power failure.
Surge-Protected Outlets(3)
Connect a printer, fax machine, or scanner to the “Surge-protected”
outlets. These outlets do not provide power during power failure.
CAUTION: NEVER connect a laser printer or scanner to the
battery backup sockets of UPS. The equipment may draw
significantly power to overload the UPS.
Turn On/Off the UPS
To turn on the UPS unit, press the power switch lightly. Then, the
LED or LCD will light up. To turn off the UPS unit, press the power
switch again. Then, display will shut off.
1. LCD display or LED indicators
(Please check LED or LCD
section for the details)
2.
Power switch
3.
AC input
4.
Battery backup outlets
5.
Surge-protected outlets
6. USB port (option)
7.
Modem/phone/network surge
protection (option)
Operation Display
UPS
Mode
LCD
Description
UPS
Power on
When UPS is powered
on, it will enter this
mode for 4 seconds.
AC Mode
LCD information will be
displayed in the
following order when
LCD is touched.
1.
Output voltage
2.
Input voltage
3.
Load level
4.
Battery capacity
Overload
in AC
mode
icon will flash.
When overload occurs,
alarm will beep every
0.5 second.
Battery
Mode
When battery level is low,
icon will flash.
Alarm will beep every
10 seconds and LCD
information will be
displayed in the
following order when
LCD is touched.
1.
Output voltage
2.
Input voltage
3.
Load level
4.
Battery capacity
Overload
in battery
mode
icon will flash.
When overload occurs,
alarm will beep every
0.5 second.
NOTE: If backlight shuts off, you may activate it by touching the
screen.
Fault Code Table:
*Outlet type can be schuko,
UK or universal.
8.
Coax surge protection (option)
LED
Alarm
UPS Status
● Green
Off
The mains is normal and
UPS is operated
normally.
★Yellow
Sounding every
10 seconds
Power failure occurs and
UPS is on battery mode.
★Yellow
Sounding every
second
Low battery
○ Green
Off
UPS is off.
● Red
Continuously
sounding
UPS fault
●
LED on
○
LED Off
★
LED flashing
Fault condition
Solutions
Output short
circuited
Disconnect short-circuited
loads and restart the UPS
again.
Overload fault
Disconnect all output loads
and restart the UPS again.
Overcharge
Call for service immediately.
Bad or severely
discharged
battery
Please replace the battery.
High output
voltage fault
Call for service immediately.
If fault alarm occurs, please call for service immediately.

Chat with your FSP NanoFit manual using AI

Get instant AI answers from your FSP NanoFit manual

Ask anything about the FSP NanoFit. Answers come from this manual, with the pages they are based on.

NanoFit Maintenance Schedule

Before first use
Charge battery before initial use

Charge the battery for 6 hours prior to initial use for best results.

Before cleaning
Unplug unit before cleaning

Unplug the UPS from AC power before cleaning and do not use liquid or spray detergents.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend NanoFit?

Yes No

Frequently Asked Questions

A

It is designed to provide short-term backup power and surge protection for computers, monitors, and other small office devices. It helps prevent sudden shutdowns and supports safer operation during power issues.

Is this answer helpful?

A

The recommended initial charge is about 6 hours. This helps prepare the internal battery for stable performance before you rely on it for backup power.

Is this answer helpful?

A

Use the battery backup outlets for critical equipment such as a computer and monitor. These outlets provide battery support, filtering, and surge protection during outages.

Is this answer helpful?

A

No. The text warns against connecting laser printers or scanners to battery backup sockets because they can draw too much power and overload the UPS.

Is this answer helpful?

A

The LED or LCD display shows power status, input and output voltage, load level, and battery capacity. It also warns about overload, low battery, and faults through icons and alarms.

Is this answer helpful?

A

Disconnect unnecessary or short-circuited loads and restart the unit. If the fault remains, or if the device reports high output voltage, contact service immediately.

Is this answer helpful?

A

Battery replacement should follow the same type and rating used by the unit, but the text emphasizes that internal service is for qualified personnel. If you are unsure, use professional support.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Three battery-backed outlets help keep a PC and monitor running during outages.
  • Three surge-protected outlets provide added protection for peripherals without draining backup power.
  • LCD/LED indicators and alarms make it easy to track voltage, load, and battery status.
  • Compact, lightweight design and quiet operation suit desks, small offices, and home setups.
VS

Disadvantages

  • Not suitable for high-draw devices like laser printers on battery-backed sockets.
  • Single-battery design limits runtime for larger loads or extended outages.
  • Internal parts are not user-serviceable, so repairs and some battery issues need professional help.
  • Designed for controlled indoor environments, so heat, humidity, and liquids are concerns.
M: OA-GPT-54-NAN

Product Specification

Type

Power strip with integrated UPS

Classification

VFD (Off-Line)

Voltage

230V

Outputs

6x Schuko, 2x USB-A (5V/1A)

Charging time

8h (90%)

Weight

6.61 lb

Dimensions (WxHxD)

6.26x3.74x12.01in

Manufacturer's warranty

two years

M: OA-GPT-54-NAN

Product Description

FSP NanoFit UPS: Compact Backup Power for Everyday Protection

The FSP NanoFit UPS is a practical standby power solution designed to keep essential electronics running when the mains supply becomes unstable or fails. Available in 400VA, 600VA, and 800VA variants, it focuses on the needs of home offices and small workspaces where reliable backup, surge defense, and simple operation matter most. If you are looking for a compact unit that is easy to set up and easy to understand, the FSP NanoFit UPS Manual reflects exactly that philosophy: clear steps, straightforward connections, and practical safety guidance.

At its core, this UPS is meant to protect computers, monitors, and other sensitive office devices. Three battery-backed outlets provide automatic support during outages, while three surge-protected outlets are better suited for accessories such as printers, scanners, or fax machines. It also adds EMI filtering, line conditioning, and surge suppression, helping connected equipment stay safer in day-to-day use. The transfer time is typically only a few milliseconds, so the switch to battery power is quick enough to prevent most interruptions.

Monitoring is simple thanks to LED or LCD status indicators. Users can check output voltage, input voltage, load level, and battery capacity with a touch, while alerts warn of overload, low battery, or fault conditions. That makes the unit easier to manage than a basic power strip, especially when power quality is inconsistent. The simulated sine wave output and sealed lead-acid battery design further underline its role as a dependable everyday backup tool rather than a complex enterprise system.

The design is also compact and lightweight, which makes placement easier on or under a desk. A recommended initial charge of around six hours helps the battery reach a solid starting point, and the unit can recover to most of its capacity within about eight hours. For best results, it should be used indoors in a controlled environment, with vents left clear and liquids kept away from the unit.

Notes

  • Best suited for PCs, monitors, and similar office equipment.
  • Keep laser printers and other heavy loads off battery-backed outlets.
  • Replace batteries only with the same type and rating.
  • Use the status display and alarms to spot overloads early.

Quick takeaway

The FSP NanoFit UPS combines small size, useful runtime support, and essential power protection into a simple package that fits modern everyday computing needs.

M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly