Manual.ly Logo

Eizo FlexScan EV3895 Manual

0.0 · 0 Ratings

PDF manual · 51 Pages

English

M: QW-35-FL
page

/ 51

Loading...
7c12511c7f44ff63c122fb877f152c51aa26 page 2c
7-2. Anbringen des optionalen Schwenkarms
Der Monitor kann vom Standfuß entfernt werden, um ihn an einem anderen Standfuß oder einem
Schwenkarm anzubringen.
Achtung
• Wenn Sie einen Schwenkarm oder einen Standfuß anbringen, befolgen Sie die Anweisungen im jeweiligen
Benutzerhandbuch.
• Wenn Sie den Schwenkarm oder Standfuß eines anderen Herstellers verwenden, achten Sie im Voraus darauf,
dass er dem VESA-Standard entspricht. Verwenden Sie die VESA-Befestigungsschrauben, die mit diesem
Produkt mitgeliefert werden, wenn Sie den Schwenkarm oder den Standfuß anbringen.
- Lochabstand für die Schrauben: 100 mm × 100 mm
- VESA-Halterung für Arm oder Standfuß, Außenabmessungen: 122 mm × 122 mm oder geringer (größere
Halterungen beeinträchtigen das Gerät).
- Stärke der Platte: 2,6 mm
- Ausreichende Stabilität, um das Gewicht des Monitors (außer dem Standfuß) und Zubehör wie Kabel zu tragen.
• Beim Befestigen eines Schwenkarms oder Standfußes sind die möglichen Ausrichtungen und der
Bewegungsbereich (Kippwinkel) wie folgt:
Ausrichtung
Bewegungsbereich
(Kippwinkel)
Nach oben: 45˚ Nach unten: 45˚
• Schließen Sie die Kabel nach dem Befestigen eines Schwenkarms oder Standfußes an.
• Bewegen Sie den entfernten Standfuß nicht nach oben oder unten. Dies kann zu Verletzungen oder Schäden am
Gerät führen.
• Der Monitor und der Schwenkarm oder Standfuß sind schwer. Wenn sie herunterfallen, kann dies zu Verletzungen
oder Schäden am Gerät führen.
• Überprüfen Sie von Zeit zu Zeit, dass die Schrauben ausreichend fest angezogen sind. Wenn die Schrauben
nicht fest genug angezogen sind, kann sich der Monitor lösen. Dies kann zu Verletzungen oder Schäden führen.
1.
Bringen Sie den Schwenkarm oder Standfuß am Monitor an.
Verwenden Sie die VESA-Befestigungsschrauben, die mit diesem Produkt mitgeliefert werden, wenn
Sie den Schwenkarm oder den Standfuß anbringen.
44
Kapitel 7 Anbringen/Entfernen des Standfußes

FlexScan EV3895 Maintenance Schedule

Regularly
Clean the monitor housing and LCD display surface

Wipe stains with a soft cloth dampened with water or ScreenCleaner. Do not use alcohol, thinner, wax, or abrasive cleaners.

Every hour
Take a 10-minute break from viewing

To prevent eye fatigue during long work sessions, take a 10-minute pause every hour.

Periodically
Check tightness of mounting screws

When using an optional arm or stand, periodically check that VESA mounting screws are sufficiently tightened to prevent the monitor from loosening.

Show in the manual (page 44)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend FlexScan EV3895?

Yes No

Frequently Asked Questions

A

The monitor supports USB Power Delivery with a maximum output of 85 watts when connected via the recommended USB-C cables.

Is this answer helpful?

A

Yes, the monitor supports Picture-by-Picture mode, allowing you to display up to three different computer signals simultaneously.

Is this answer helpful?

A

Yes, it includes stereo speakers with a total output of 2 watts plus a headphone jack for private audio listening.

Is this answer helpful?

A

No, the Screen InStyle utility is currently designed to run only on Windows operating systems.

Is this answer helpful?

A

Use the built-in screen saver or turn off the monitor regularly. Avoid displaying static images for extended periods without variation.

Is this answer helpful?

A

The Eizo FlexScan EV3895 has a native resolution of 3840 x 1600 pixels on a 37.5-inch curved panel.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Curved 3840x1600 display provides an immersive, wide viewing area
  • Picture-by-Picture supports up to three simultaneous input windows
  • USB-C port delivers 85W power and acts as a docking station
  • EcoView sensor auto-adjusts brightness to save energy and reduce eye strain
  • Specialized color modes include sRGB, Paper, Movie, and DICOM
VS

Disadvantages

  • Screen InStyle software only supports Windows operating systems
  • Native resolution limits some PbyP layouts to reduced size displays
  • Requires specific USB-C cables to achieve full 85W charging speed
  • Ambient light sensor must not be blocked for Auto EcoView to function
  • Initial warm-up time of 30 minutes is needed for stable image quality
M: QW-35-FL

Product Specification

Function

Monitor (stationary)

Diagonal

37.5" (95.3cm)

Resolution

3840x1600 (UWQXGA), 24:10, 111ppi

Panel

IPS (AH-IPS), Manufacturer: LG Display

Backlight

LED, Blue light filter, flicker-free

Brightness

300cd/m^2 (typical)

Contrast

1000:1 (static)

Response Time

5ms (GtG)

Refresh Rate

60Hz (3840x1600)

Signal Frequency

31-99kHz (H) / 29-61Hz (V)

Connections

2x HDMI 1.4, 1x DisplayPort 1.2, 1x USB-C 3.0 with DisplayPort 1.2 (Upstream, 5Gb/s, PD 85W), 2x USB-B 3.0 (Upstream, 5Gb/s), 4x USB-A 3.0 (Downstream, 5Gb/s), 1x 3.5mm jack (Line-Out), 1x RJ-45 1Gb LAN, 1x AC-In C13 (Power In)

Shape

Curved, 2300R/2.30m

Viewing Angle

178°/178°

Coating

Non-glare (matte)

Color Depth

8bit (16.7 Million Colors)

FRC

N/A (8bit native)

sRGB

100%

DCI-P3

94%

LUT (Lookup Table)

10bit, Factory Calibration

Certifications/Standards

TCO 9

Speakers

Speakers (2x 1W)

Ergonomics

With stand, height adjustable (7.6 inches), Pivot N/A, Swivel (+/- 35 degrees), Tilt (+35/-5 degrees)

VESA

100x100 (occupied)

Power Consumption

194W (max), 28W (typical), 0.5W (Standby), 35W (Energy Label old A+++ to G)

SDR Energy Efficiency (A to G)

29kWh/1000h (E)

Old Energy Efficiency (A+++ to G)

51.1kWh (A)

Features

Security lock (Kensington Security Slot), Presence sensor, Light sensor, KVM switch, Picture-in-Picture, Slim Bezel, HDCP 2.2

Screen-to-Body Ratio

90.53% (calculated)

Dimensions

35.2x16.2x9.4 inches (WxDxH) with stand compressed, 35.2x15.7x4.3 inches (WxDxH) without stand

Weight

29.1 lbs (with stand), 20.94 lbs (without stand)

Power Supply

Internal

Warranty

Five years (On-site Exchange Service)

USB Spelling

Link

M: QW-35-FL

Product Description

Experience Productivity with the Eizo FlexScan EV3895

The Eizo FlexScan EV3895 redefines the multi-monitor workspace by combining a massive curved display with versatile connectivity. This 37.5-inch LCD monitor features a stunning WQHD+ resolution of 3840 x 1600 pixels, offering a seamless panoramic view that eliminates the need for multiple screens. The curved design enhances immersion and reduces eye strain during long work sessions, making it ideal for professionals who demand precision and comfort.

One of the standout features is the Picture-by-Picture (PbyP) capability, which allows users to view up to three different input signals simultaneously on a single screen. Whether you are comparing code across different environments or monitoring multiple data streams, this flexibility boosts efficiency. The monitor supports various connection options including DisplayPort, HDMI, and USB-C, ensuring compatibility with modern laptops and desktops.

The built-in docking station functionality transforms the EV3895 into a central hub. Through the USB-C port, users can connect peripherals, access a network via the integrated LAN port, and charge devices with up to 85 watts of power delivery. This simplifies cable management and creates a clean, organized desk setup. Additionally, the EcoView technology automatically adjusts brightness based on ambient light conditions, promoting energy savings and reducing eye fatigue.

For color-critical tasks, the monitor offers specialized modes such as sRGB, Paper, Movie, and DICOM. These presets ensure accurate color reproduction for photography, document editing, video playback, and medical imaging. The Screen InStyle software further enhances control, allowing users to manage settings remotely and switch between inputs using keyboard shortcuts. With its robust build quality and ergonomic stand, the Eizo FlexScan EV3895 stands out as a premium solution for demanding professional environments.

M: QW-35-FL

© Copyright 2026 Manual.ly