Manual.ly Logo

Eizo ColorEdge CS2740 Manual

5.0 · 1 Ratings

PDF manual · 49 Pages

English

M: OA-GPT-54-NAN
page

/ 49

Loading...
049322d7dc73c8daf5116d8a9787a529acd9 page 3
Notice for this monitor
Aside from general purposes like creating documents, viewing multimedia content, this product is also suited
to applications such as graphics creation and digital photo processing, where accurate color reproduction is
a priority.
This product has been adjusted specically for use in the region to which it was originally shipped. If the
product is used outside the region, it may not operate as specied in the specications.
This product may not be covered by warranty for uses other than those described in this manual.
The specications noted in this manual are only applicable when the following are used:
• Power cords provided with the product
• Signal cables specied by us
Only use optional products manufactured or specied by us with this product.
If you place this product on a lacquer-coated desk, the color may adhere to the bottom of the stand due to
the composition of the rubber. Check the desk surface before use.
It takes about 30 minutes (under our measurement conditions) for the monitor display to stabilize. Please
wait 30 minutes or more after the monitor power has been turned on, and then adjust the monitor.
Monitors should be set to a lower brightness to prevent a loss in the screen quality caused by long-term use
and to maintain stable use.
When the screen image is changed after displaying the same image for extended periods of time, an
afterimage may appear. Use the screen saver or power save function to avoid displaying the same image for
extended periods of time. Depending on the image, an afterimage may appear even if it was displayed for
a short period of time. To remove such a phenomenon, change the image or keep the power turned o󰀨 for
several hours.
If the monitor displays continuously over a long period of time, dark smudges or burn-in may appear. To
maximize the life of the monitor, we recommend the monitor be turned o󰀨 periodically.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer
to “Cleaning” (page 4)).
The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may
appear on the LCD panel, this is not a malfunction. Percentage of e󰀨ective dots: 99.9994 % or higher.
The backlight of the LCD panel has a xed lifetime. Depending on the usage pattern, such as usage for
long continuous periods, the lifespan of the backlight may run out sooner, requiring replacement. When the
screen becomes dark or begins to icker, please contact your local EIZO representative.
Do not press on the LCD panel or edge of the frame strongly, as this may result in display malfunctions, such
as interference patterns, etc. If pressure is continuously applied to the LCD panel surface, the liquid crystal
may deteriorate or the LCD panel may be damaged. (If the pressure marks remain on the panel, leave the
monitor with a black or white screen. The symptom may disappear.)
Do not scratch or press on the LCD panel with any sharp objects, at this may result in damage to the LCD
panel. Do not attempt to brush with tissues as this may scratch the panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew
condensation may occur on the interior and exterior surfaces of the monitor. In that case, do not turn the
monitor on. Instead wait until the dew condensation disappears, otherwise it may cause some damage to the
monitor.
3
Notice for this monitor

Chat with your Eizo ColorEdge CS2740 manual using AI

Get instant AI answers from your Eizo ColorEdge CS2740 manual

Ask anything about the Eizo ColorEdge CS2740. Answers come from this manual, with the pages they are based on.

ColorEdge CS2740 Maintenance Schedule

Remind me when maintenance is due
Monthly
Clean the monitor

Wipe the casing and LCD display surface with a soft cloth dampened with water. Do not use alcohol or other chemicals.

Yearly
Inspect backlight condition

Check if the screen has become dark or flickering, which indicates limited backlight life requiring replacement by an EIZO representative.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend ColorEdge CS2740?

Yes No
0
User Pic

Jessica Schenk

9 months ago

Is this screen really good for photo and image editing, or is it mainly for basic use?

0
User Pic

Manual.ly

9 months ago

Based on customer feedback, it is well suited for image and photo editing. Reviewers specifically mention using the screen for image processing and say it is worth the money. If you plan to edit images regularly, this is the kind of display people use for that purpose and appreciate the results enough to recommend it.

M: OA-GPT-54-NAN
M: OA-GPT-54-NAN
0
User Pic

alias_sapiente

10 months ago

I want to use this monitor for photo or image editing. Is it actually worth the price for that purpose?

0
User Pic

Manual.ly

10 months ago

Yes, based on customer feedback and typical use cases, it is well suited for image editing. Reviewers specifically use it for picture editing and say it is worth every cent. For best results, set the right picture mode for editing, adjust brightness and contrast to your workspace, and if available, enable any color or sRGB settings. If you do professional work, consider calibrating the display for your workflow to ensure consistent colors across devices. Overall, the panel quality and editing-friendly viewing experience make it a solid choice if image work is your main goal.

M: OA-GPT-54-NAN
M: OA-GPT-54-NAN

Frequently Asked Questions

A

It pairs a wide-color IPS panel with 10-bit color depth and multiple color modes designed for consistency. It is also intended to integrate with ColorNavigator 7 calibration workflows and Quick Color Match for display-to-print color alignment. The DUE uniformity feature helps reduce unevenness for more predictable viewing.

Is this answer helpful?

A

Yes, for compatible devices. USB Type-C supports DisplayPort Alt Mode video transfer and USB Power Delivery up to 60 W. Charging depends on whether your notebook supports USB Power Delivery, and video transfer depends on whether it supports USB-C video output.

Is this answer helpful?

A

Front custom keys let you assign frequently used actions for quick access. Based on the provided functions, you can switch brightness, return to a previous color mode for comparison, or view input and color information without navigating deep menus.

Is this answer helpful?

A

The monitor notes that different units can appear in different colors due to variations. It also advises fine tuning when matching multiple displays. Using ColorNavigator 7 with the sensor and calibrating calibration targets (CAL1 to CAL7) helps keep results aligned.

Is this answer helpful?

A

Afterimages are a typical LCD behavior when the same image is displayed for extended periods. Use the screen saver or the monitor's power-save function. If an afterimage appears even after shorter periods, change the image or keep the monitor powered off for several hours to help it fade.

Is this answer helpful?

A

For stains on the cabinet and panel, use a soft cloth lightly moistened with water. Avoid chemicals such as alcohol and antiseptic solutions, and never use thinner, benzine, wax, or abrasive cleaners. Optional ScreenCleaner is recommended for convenience and safe results.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • 4K resolution (3840 x 2160) with a wide-gamut IPS panel and 10-bit color depth for precise work.
  • Works with ColorNavigator 7 for calibration targets, plus Quick Color Match for easier display-to-print consistency.
  • USB Type-C supports DisplayPort Alt Mode and up to 60 W USB Power Delivery for compatible notebooks.
  • DUE (Digital Uniformity Equalizer) helps reduce unevenness and supports better visual consistency.
  • Custom keys enable quick access to tasks like brightness, previous color mode, and detailed information.
VS

Disadvantages

  • Calibration quality depends on using the correct external sensor with ColorNavigator 7.
  • Long static images can cause afterimages, so screen saver or power save is recommended.
  • Backlight has a fixed lifetime; brightness changes may require service or replacement.
  • Power and image behavior can vary with connected devices, signal formats, and USB-C video support.
M: OA-GPT-54-NAN

Product Specification

Function

Monitor (stationary)

Diagonal

27" (27.01in)

Resolution

3840x2160 (4K UHD), 16:9, 163ppi

Panel

IPS

Backlight

LED, flicker-free

Brightness

350cd/m² (typical)

Contrast

1,000:1 (static)

Response time

10ms (GtG)

Refresh rate

60Hz (3840x2160)

Signal frequency

25-137kHz (H) / 23-61Hz (V)

Ports

1x HDMI 1.4, 1x DisplayPort, 1x USB-C 3.0 with DisplayPort 1.2 (Upstream, 5Gb/s, PD 60W), 1x USB-B 3.0 (Upstream, 5Gb/s), 2x USB-A 3.0 (Downstream, 5Gb/s), 2x USB-A 2.0 (Downstream, 480Mb/s), 1x AC-In C13 (power connection)

Shape

straight (flat)

Viewing angle

178°/178°

Coating

non-glare (matt)

Color depth

10bit (1.07 billion colors)

FRC

N/A (10bit native)

sRGB

100%

Adobe RGB

99%

DCI-P3

94%

LUT (Lookup table)

16bit, hardware calibration

Ergonomics

with stand, height adjustable (6.10in), Pivot (+90°), swivel (+172°), tilt (+35°/-5°)

VESA

100x100 (occupied)

Power consumption

168W (maximum), 36W (typical), 1W (Standby), 42W (Energy label old A+++ to G)

Energy efficiency SDR (A to G)

38kWh/1000h (G)

Energy efficiency old (A+++ to G)

61.3kWh (B)

Special features

HDCP 2.2

Screen-to-Body-Ratio

83.33% (calculated)

Dimensions

25.12x15.91x10.43in (WxHxD) with stand compressed, 25.12x14.88x2.95in (WxHxD) without stand

Color

black (display frame) / black (lower bezel) / black (stand) / black (back)

Weight

22.71lb (with stand), 14.77lb (without stand)

Power supply

internal

Warranty

five years (on-site replacement service)

USB notation

Link

M: GO-GEM-FL-25

Product Description

Eizo ColorEdge CS2740 27"

A studio-grade 27 inch display for color-critical work

The Eizo ColorEdge CS2740 27" is designed for creators who need reliable color reproduction, from graphics production to digital photo processing. It combines a wide-color IPS panel with 10-bit color depth, giving you smooth tonal transitions and faithful rendering for demanding workflows. With a resolution of 3840 x 2160 and a viewing setup suited for long sessions, it helps keep your output consistent from design review to final edits.

Color management and easy calibration workflows

A standout feature of the ColorEdge series is streamlined calibration and color matching. The monitor is built to work with ColorNavigator 7, allowing you to calibrate performance using an external sensor (sold separately). For fast comparisons against prints, Quick Color Match supports simplified color matching between the display and compatible retouch and printer setups.

You can also tailor color behavior using multiple display modes, including dedicated presets and calibration target modes (set through ColorNavigator 7). For additional stability, the DUE (Digital Uniformity Equalizer) option helps reduce display unevenness. When DUE settings change, recalibration is recommended so your results stay accurate.

Connectivity built for modern desks

The CS2740 offers flexible input options for professional setups, including DisplayPort, HDMI, and USB Type-C. USB Type-C supports DisplayPort Alt Mode video transfer, and USB Power Delivery provides up to 60 W to power compatible notebooks through a single cable. A built-in USB hub simplifies peripheral connections, and USB downstream devices can remain active even in power-saving states, depending on your configuration.

Custom keys on the front let you quickly switch tasks such as brightness, previous color mode comparisons, and on-demand information.

Comfort, longevity, and day-to-day care

To maintain a stable image, the display needs time to settle after power-on (about 30 minutes under the provided measurement conditions). The monitor also includes practical power-saving behavior and guidance to reduce eye strain by adjusting brightness and taking regular breaks.

When cleaning, use a soft cloth with water for the cabinet and panel. Avoid harsh chemicals, thinners, benzene, wax, and abrasive cleaners to prevent cosmetic and image-quality issues.

Notes

  • Let the monitor stabilize for about 30 minutes after turning it on before critical color adjustments.
  • Avoid long static images to reduce afterimage risk; use a screen saver or power-save mode.
  • If the unit has dew condensation after moving from cold to warm, do not power it on until the moisture disappears.

Key results (most important)

  • Wide-gamut IPS with 10-bit color supports color-critical editing at 4K resolution.
  • Designed for ColorNavigator 7 and Quick Color Match to speed calibration and print consistency.
  • USB Type-C with DisplayPort Alt Mode and up to 60 W USB Power Delivery reduces desk cable clutter.
  • DUE uniformity options help improve evenness for more consistent output.
  • Built-in controls, power save behavior, and safe cleaning guidance support long-term daily use.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly