Manual.ly Logo

Eizo ColorEdge CG2420 Manual

4.5 · 8 Ratings

PDF manual · 75 Pages

English

M: claude-opus-5-5
page

/ 75

Loading...
9764516803bd1dc13114216afd009cd59e2d page 3d
- 61 -
Anhang
BEGRENZTE GARANTIE
LIMITED WARRANTY
EIZO Corporation (hereinafter referred to as “
EIZO”) and distributors authorized by EIZO (hereinafter referred to as the “Distributors”) warrant, subject to and in accordance with the
terms of this limited warranty (hereinafter referred to as the “
Warranty”), to the original purchaser (hereinafter referred to as the “Original Purchaser”) who purchased the product
speci ed in this document (hereinafter referred to as the “
Product
”) from EIZO or Distributors, that EIZO and Distributors shall, at their sole discretion, either repair or replace the
Product at no charge if the Original Purchaser becomes aware within the Warranty Period (de ned below) that the Product malfunctions or is damaged in the course of normal use of
the Product in accordance with the description in the instruction manual attached to the Product (hereinafter referred to as the “
User’s Manual”).
The period of this Warranty is limited to (i) ve (5) years from the date of purchase of the Product; or, limited to the expiration of (ii) 30,000 hours of its use of the Product (hereinafter
referred to as the “
Warranty Period”). However, the brightness of the Product shall be warranted only if the Product has been used within the recommended brightness described in
the User’s Manual. The Warranty Period for the brightness is also limited to  ve (5) years from the date of purchase of the Product subject to the usage time being less than or equal to
10,000 hours. EIZO and Distributors shall bear no liability or obligation with regard to the Product in relation to the Original Purchaser or any third parties other than as provided under
this Warranty.
EIZO and Distributors will cease to hold or store any parts (excluding design parts) of the Product upon the expiration of  ve (5) years after the production of such parts is discontinued.
In repairing the monitor, EIZO and Distributors will use renewal parts which comply with our QC standards. If the unit cannot be repaired due to its condition or the stockout of a
relevant part, EIZO and Distributors may offer the replacement by a product with equivalent performance instead of repairing it.
The Warranty is valid only in the countries or territories where the Distributors are located. The Warranty does not restrict any legal rights of the Original Purchaser.
Notwithstanding any other provision of this Warranty, EIZO and Distributors shall have no obligation under this Warranty whatsoever in any of the cases as set forth below:
(a) Any defect of the Product caused by freight damage, modi cation, alteration, abuse, misuse, accident, incorrect installation, disaster, faulty maintenance and/or improper repair
by third party other than EIZO and Distributors;
(b) Any incompatibility of the Product due to possible technical innovations and/or regulations;
(c) Any deterioration of the sensor;
(d) Any deterioration of display performance caused by the deterioration of expendable parts such as the LCD panel and/or backlight, etc. (e.g. changes in brightness, changes in
brightness uniformity, changes in color, changes in color uniformity, defects in pixels including burnt pixels, etc.);
(e) Any deterioration of the Product caused by the use at higher brightness than the recommended brightness described in the User’s Manual;
(f) Any defect of the Product caused by external equipment;
(g) Any defect of the Product on which the original serial number has been altered or removed;
(h) Any normal deterioration of the product, particularly that of consumables, accessories, and/or attachments (e.g. buttons, rotating parts, cables, User’s Manual, etc.); and
(i ) Any deformation, discoloration, and/or warp of the exterior of the product including that of the surface of the LCD panel.
To obtain service under the Warranty, the Original Purchaser must deliver the Product, freight prepaid, in its original package or other adequate package affording an equal degree
of protection, assuming the risk of damage and/or loss in transit, to the local Distributor. The Original Purchaser must present proof of purchase of the Product and the date of such
purchase when requesting services under the Warranty.
The Warranty Period for any replaced and/or repaired product under this Warranty shall expire at the end of the original Warranty Period.
EIZO OR DISTRIBUTORS ARE NOT RESPONSIBLE FOR ANY DAMAGE TO, OR LOSS OF, DATA OR OTHER INFORMATION STORED IN ANY MEDIA OR ANY PART OF ANY
PRODUCT RETURNED TO EIZO OR DISTRIBUTORS FOR REPAIR.
EIZO AND DISTRIBUTORS MAKE NO FURTHER WARRANTIES, EXPRESSED OR IMPLIED, WITH RESPECT TO THE PRODUCT AND ITS QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR USE. IN NO EVENT SHALL EIZO OR DISTRIBUTORS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHER DAMAGE WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OR
INABILITY TO USE THE PRODUCT OR IN ANY CONNECTION WITH THE PRODUCT, WHETHER BASED ON CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, EVEN IF EIZO OR
DISTRIBUTORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS EXCLUSION ALSO INCLUDES ANY LIABILITY WHICH MAY ARISE OUT OF THIRD PARTY CLAIMS AGAINST THE
ORIGINAL PURCHASER. THE ESSENCE OF THIS PROVISION IS TO LIMIT THE POTENTIAL LIABILITY OF EIZO AND DISTRIBUTORS ARISING OUT OF THIS LIMITED WARRANTY AND/OR SALES.

Chat with your Eizo ColorEdge CG2420 manual using AI

Get instant AI answers from your Eizo ColorEdge CG2420 manual

Ask anything about the Eizo ColorEdge CG2420. Answers come from this manual, with the pages they are based on.

ColorEdge CG2420 Maintenance Schedule

Every hour
Take a break from the monitor

Take a 10-minute break every hour to prevent eye fatigue.

When needed
Clean the display and casing

Use the included ScreenCleaner for stains; do not use alcohol or solvents. Turn off the monitor if condensation forms.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend ColorEdge CG2420?

Yes No
0
User Pic

Toby Ellis

8 months ago

My CG2420 looks slightly darker in the corners (even with DUE). I also noticed a few magenta dots on white. Does this mean it is faulty, and what coverage applies for sub-pixel defects?

0
User Pic

Manual.ly

8 months ago

The DUE (Digital Uniformity Equalizer) improves uniformity, but it cannot guarantee 100 percent identical brightness and color at every point. Slight corner darkening can be within panel/tuning tolerances. For the most accurate results, allow the monitor to warm up, then run the calibration and apply the correct color profile for your workflow. If you see persistent sub-pixel defects (spots that remain visible across tests and viewing angles), please stop troubleshooting and contact support for a panel check. Pixel-defect coverage typically depends on the applicable warranty/pixel-defect class and the exact number and type of affected sub-pixels. Have photos and a test pattern ready when you submit the case.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is best for color-sensitive tasks such as photo editing, design, graphics production, and other workflows where accurate color and stable image quality matter.

Is this answer helpful?

A

Yes. It includes a built-in calibration sensor and supports SelfCalibration, which helps keep the display aligned with your chosen targets automatically.

Is this answer helpful?

A

It offers DVI-D, HDMI, and DisplayPort inputs, plus USB hub connectivity for compatible peripherals and charging.

Is this answer helpful?

A

Yes. The monitor supports common Windows versions and Mac OS X systems, and it also works with Eizo’s ColorNavigator 6 software for calibration and profiling.

Is this answer helpful?

A

Its wide Adobe RGB coverage, IPS panel, 1920 × 1200 resolution, contrast performance, and calibration tools make it a strong choice for precise visual work.

Is this answer helpful?

A

Yes. The display should warm up before fine adjustments or calibration, and the manual recommends waiting long enough for the panel to stabilize properly.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • 99% Adobe RGB coverage and IPS viewing angles make it well suited for color-critical work.
  • Built-in sensor with SelfCalibration helps maintain consistent calibration over time.
  • 1920 × 1200 resolution gives extra vertical space for editing and timelines.
  • USB 3.0 hub, fast charging, and multiple video inputs add practical connectivity.
VS

Disadvantages

  • Requires warm-up and careful calibration for the most accurate results.
  • HDMI and DisplayPort audio are not supported, so sound must come from elsewhere.
  • Cleaning and handling need care; harsh chemicals or pressure can damage the panel.
  • Best performance depends on proper setup, recommended cables, and ideal ambient lighting.
M: OA-GPT-54-NAN

Product Specification

Function

Monitor (stationary)

Diagonal

24" (24.02in)

Resolution

1920x1200 (WUXGA), 16:10, 94ppi

Panel

IPS, Manufacturer: Panasonic (VVX24F152H00)

Backlight

LED

Brightness

400cd/m² (typical)

Contrast

1,500:1 (static)

Response time

10ms (GtG)

Refresh rate

60Hz (1920x1200)

Signal frequency

15-78kHz (H) / 24-61Hz (V)

Connections

1x HDMI 1.4, 1x DisplayPort 1.1, 1x DVI, 1x USB-B 3.0 (Upstream, 5Gb/s), 3x USB-A 3.0 (Downstream, 5Gb/s), 1x AC-In C13 (Power connection)

Shape

straight (flat)

Viewing angle

178°/178°

Coating

non-glare (matte)

Color depth

10bit (1.07 billion colors)

FRC

yes (8bit+2bit)

sRGB

100%

Adobe RGB

99%

DCI-P3

98%

LUT (Lookup table)

16bit, Hardware calibration (Eizo SelfCalibration)

Controls

mechanical buttons

Ergonomics

with stand, height adjustable (6.10in), Pivot (+90°), swiveling (+172°), tiltable (+35°/-5°)

VESA

100x100 (occupied)

Power consumption

79W (maximum), 20W (typical), 0.6W (Standby), 23W (Energy label old A+++ to G)

Energy efficiency SDR (A to G)

21kWh/1000h (F)

Energy efficiency old (A+++ to G)

33.6kWh (A)

Special features

Glare shield

Screen-to-Body Ratio

Inf% (calculated)

Dimensions

21.81x21.69x9.65in (WxHxD) with stand compressed

Color

black (display frame) / black (bottom bezel) / black (stand)

Weight

17.20lb (with stand)

Power supply

internal

Warranty

five years (On-site replacement service)

USB notation

Link

M: OA-GPT-54-NAN

Product Description

Eizo ColorEdge CG2420, 24-inch: A Color-Accurate Monitor Built for Serious Creative Work

The Eizo ColorEdge CG2420, 24-inch Manual points to a display made for users who care about precision, consistency, and workflow control. This 24-inch wide-screen monitor is designed for photo editing, graphic design, and other visual tasks where accurate color reproduction matters as much as sharp detail. With a 1920 × 1200 IPS panel, it offers a practical blend of screen space, stable viewing angles, and dependable image quality.

One of its strongest selling points is its wide color performance. The monitor covers 99% of Adobe RGB and also supports sRGB, making it a strong fit for color-managed work. A 1500:1 contrast ratio helps deliver deeper blacks and a more defined image, while the built-in calibration sensor and SelfCalibration function reduce the need for constant manual adjustment. For creators who need a display to stay trustworthy over time, that is a major advantage.

The CG2420 is also built with flexibility in mind. It includes DVI-D, HDMI, and DisplayPort inputs, plus a USB 3.0 hub for connecting peripherals and charging compatible mobile devices. The included hood helps block distracting ambient reflections, which is especially useful in bright studios or offices. Its stand offers generous height, tilt, and swivel adjustment, so it can be adapted to a more comfortable working posture during long editing sessions.

Another highlight is the support software. Eizo’s ColorNavigator 6 helps users calibrate the display and create color profiles, giving more control over professional workflows. The monitor also supports HDCP content and provides different color modes for standard, Adobe RGB, sRGB, and calibration-based use. In practice, this means the display can shift between general use and accurate production work without much hassle.

For best results, the monitor should be given time to warm up before calibration or fine tuning. The built-in sensor should not be touched, and the display should be cleaned carefully with safe materials only. Like most high-end color monitors, it rewards careful use with stable, reliable performance.

Notes

  • Allow the panel to stabilize before calibration.
  • Use recommended cables and accessories for best results.
  • Keep the sensor area clean and protected from strong light.
  • Lower brightness settings can help extend long-term panel consistency.
M: claude-opus-5-5

© Copyright 2026 Manual.ly