Manual.ly Logo

CyberPower Smart App Online Manual

0.0 · 0 Ratings

PDF manual · 50 Pages

English

M: QW-35-FL
page

/ 50

Loading...
a5202f308d7b78db7ec29d1561cb354d2a49 page 28
©2020 Cyber Power Systems, Inc. All rights reserved.
34
USING THE UPS SYSTEM CONT.
LCD will use RED or Yellow color to indicate the Fault or warning status and also connect the color
frame with ICON which has the same color and locates on the left zone of the screen.
WARNING ICON POSSIBLE CAUSE SOLUTION
Battery Mode UPS is operating on battery power.
Save your data and perform a
controlled- shutdown.
Load Over
XXX%
Your equipment requires more
power than the setting in the
Power Management Software
(Power Panel® Business) will allow.
Shut off the non-essential
equipment or increase the
level in the Power Management
Software.
Wiring Fault*
*Only applicable
in areas where
200-240 V
electrical service
is provisioned
with a Neutral
line.
Line and neutral wires are reversed. Exchange line and neutral wires.
Missing ground wire. Connect ground wire.
No ground wire.
Disable Wiring Fault alarm on
LCD panel.
Line Abnormal
Utility power is out of range for
the UPS to auto-restart.
Check whether voltage or
frequency of utility power is out
of range.
Over Charge Battery is overcharged.
Remove battery connector and
check charger voltage.
Service
Battery
The Battery Replacement Date
has reached the recommended 3
year maintenance period.
If batteries have been recently
replaced, then reset the Battery
Replacement Date using
PowerPanel® Business
Edition-Agent software,
RMCARD interface or through
the LCD control panel on
the UPS (See LCD Setting
Configuration).
TROUBLESHOOTING

Chat with your CyberPower Smart App Online manual using AI

Get instant AI answers from your CyberPower Smart App Online manual

Ask anything about the CyberPower Smart App Online. Answers come from this manual, with the pages they are based on.

Smart App Online Maintenance Schedule

Remind me when maintenance is due
Every 3 months
Recharge batteries during storage

When storing the UPS for an extended period, recharge the batteries every three months to ensure good capacity and prevent damage from leakage.

Show in the manual (page 13)
Every 3 years
Replace batteries

Replace batteries when the Service Battery warning appears or after the recommended 3-year maintenance period has elapsed.

Show in the manual (page 40)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Smart App Online?

Yes No

Frequently Asked Questions

A

The transfer time is typically 0ms, ensuring seamless protection for connected equipment without interruption.

Is this answer helpful?

A

Yes, you can add Extended Battery Modules to increase backup duration during power outages.

Is this answer helpful?

A

The LCD will display a Replace Battery icon or Service Battery warning when maintenance is due.

Is this answer helpful?

A

Yes, PowerPanel Business Edition software allows remote monitoring and system control.

Is this answer helpful?

A

Wear non-conductive gloves and remove metal jewelry to prevent electric shock risks during servicing.

Is this answer helpful?

A

Yes, output voltage is configurable between 200 and 240V to match local utility standards.

Is this answer helpful?

A

You can clear event logs via the LCD menu under the Event Logs section using the Enter button.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Double-conversion topology provides zero transfer time and pure sine wave output for sensitive equipment.
  • Smart Battery Management extends overall battery life and reduces charging times to under four hours efficiently.
  • Modular design supports Extended Battery Modules to increase runtime during power outages significantly.
  • Flexible installation allows for both rackmount and vertical tower setups in various IT environments.
  • Advanced LCD panel displays real-time data and allows extensive configuration of power parameters easily.
VS

Disadvantages

  • Unit weight is high and requires at least two people for safe handling during installation and moving.
  • Battery circuits are not isolated from AC power, presenting a shock risk if handled improperly.
  • Installation must be performed by qualified personnel due to high voltage and complex electrical connections.
  • Ventilation must be sufficient; obstructing openings can cause overheating and automatic shutdowns during operation.
  • Hardwiring requires matching branch circuit breaker ratings and strict adherence to electrical codes to prevent faults.
M: QW-35-FL

Product Specification

Type

Tower / Rackmount

Classification

VFI (Online)

Voltage

200V / 208V / 220V / 230V / 240V

Input

Terminal

Outputs

4x C13, 2x C19, 1x Terminal

Interfaces

USB, Serial

Charge Time

4 h

Weight

92.59 lbs

Dimensions (W x H x D)

17.05 x 3.41 x 28.35 in

Rack Units

2U

Features

LCD

Manufacturer Warranty

3 years

M: QW-35-FL

Product Description

Power Security for Mission Critical Applications

Businesses today require robust protection against electrical failures. The CyberPower Smart App Online UPS Systems provide this essential service. This CyberPower Smart App USV-System Manual is your guide to safe operation. Models OL5KERTHD and OL6KERTHD cover 5000 and 6000 VA needs. They offer double-conversion topology for pure sine wave output. Transfer time is effectively zero to protect sensitive hardware. Smart Battery Management extends life significantly. Fast Charge Technology restores 90% capacity in four hours. This ensures rapid recovery after power loss. The system delivers clean AC power.

Installation involves both rack and tower options. The unit is heavy so two people must handle lifting. Ventilation must remain clear of obstructions. Heat sensors trigger shutdowns if cooling fails. The LCD screen displays twenty-eight setup items. Four buttons allow easy navigation. You can prioritize non-critical load outlets to save battery. ECO Mode saves energy during stable grid conditions. Non-critical loads shut off to conserve energy. Network connectivity via USB or Serial enables remote management. PowerPanel software allows automatic shutdowns. Emergency Power Off connectors add safety layers. Connection for additional CyberPower External Battery modules is available.

Electrical connections must follow strict guidelines. Use VDE tested cables. Grounding is mandatory before connecting input wires. The system accepts 140 to 280 volts based on load. Frequency ranges auto-sense between 40 and 70 Hz. Maintenance requires certified replacement batteries. Electrolyte is toxic so handle with care. Remove metal jewelry before servicing. Event logs track up to twelve incidents. Regular diagnostics test fan and indicator health. Dispose of old batteries according to local hazardous waste rules. High voltage exists even when unplugged.

Please note that qualified personnel must install permanently connected units. The About menu shows the model name and firmware version. Diagnostics allow manual battery and fan tests. Ensure branch circuit breakers match the unit rating. Do not use output sockets for hair dryers. Keep away from aquariums to avoid condensation short circuits. Verify grounding before powering on. These precautions prevent electric shock risks. The manual details battery replacement dates in diagnostics. Reset the maintenance timer after service.

Important Safety Reminders

Always disconnect power before wiring. Check ventilation regularly. Use only approved fuses. Do not open the case. Contact support for charger failures.

M: QW-35-FL

© Copyright 2026 Manual.ly