Manual.ly Logo

Bresser WiFi HD Weather Station 7-in-1 Manual

0.0 · 0 Ratings

PDF manual · 104 Pages

English

M: QW-35-FL
page

/ 104

Loading...
53c969b0d0bf9022f8bb270ea359db9184ec page 5
5
1. ABOUT THIS INSTRUCTION MANUAL
These operating instructions are to be considered a component of the device.
Please read the safety instructions and the operating instructions carefully before use.
Keep these instructions for renewed use at a later date. When the device is sold or given to someone else,
the instruction manual must be provided to the new owner/user of the product.
This product is intended only for private use. It was developed as an electronic medium for the use of
multimedia services.
2. SCOPE OF DELIVERY
• Base station
• Wireless 7-in-1 professional weather sensor
• Thermo/hygro sensor
• Power supply
3. GENERAL WARNINGS
RISK OF CHOKING!
Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as these
materials pose a choking hazard.
RISK OF ELECTRIC SHOCK!
This device contains electronic components that operate via a power source (batteries). Children should
only use the device under adult supervision. Only use the device as described in the manual; otherwise,
you run the risk of an electric shock.
RISK OF CHEMICAL BURN!!
Leaking battery acid can lead to chemical burns. Avoid contact of battery acid with skin, eyes and mucous
membranes. In the event of contact, rinse the a󰀨ected region immediately with a plenty of water and seek
medical attention.
RISK OF FIRE/EXPLOSION!
Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a re.
Excessive heat or improper handling could trigger a short-circuit, a re or an explosion.
NOTE!
Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the
Service Centre and can send the device in to be repaired, if necessary.
Do not immerse the unit in water.
Do not subject the unit to excessive force, shock, dust, extreme temperature or high humidity, which may
result in malfunction, shorter electronic life span, damaged batteries and distorted parts.
Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of
batteries at full capacity. Do not use batteries from di󰀨erent brands or with di󰀨erent capacities. Remove the
batteries from the unit if it has not been used for a long time.
The manufacturer is not liable for damage related to improperly installed batteries!
EN

Chat with your Bresser WiFi HD Weather Station 7-in-1 manual using AI

Get instant AI answers from your Bresser WiFi HD Weather Station 7-in-1 manual

Ask anything about the Bresser WiFi HD Weather Station 7-in-1. Answers come from this manual, with the pages they are based on.

WiFi HD Weather Station 7-in-1 Maintenance Schedule

Remind me when maintenance is due
Every few months
Clean the rain collector

Rotate the rain collector 30 degrees anti-clockwise, remove it, clean debris or insects, and reinstall when fully dried.

Every 2 to 2.5 years
Replace batteries in sensors

Change the batteries every 2 to 2.5 years. Use lithium AA batteries for the 7-in-1 multisensor and thermo-hygro sensor.

Regularly
Clean UV sensor cover lens

Gently clean the UV sensor cover lens with a damp micro-fiber cloth to ensure precise measurement.

Show in the manual (page 45)
As needed
Calibrate UV sensor

Calibrate the UV sensor with a utility grade UV meter as the sensor naturally degrades over time.

Show in the manual (page 45)
As needed
Clean hygro-thermo sensor shield

Remove screws, pull out shield, clean dirt/insects from sensor and fan (do not wet sensors), wash shield, and dry before reassembly.

Show in the manual (page 45)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WiFi HD Weather Station 7-in-1?

Yes No

Frequently Asked Questions

A

After installing the sensor and ensuring it works correctly, you should reset the rainfall data to zero. Navigate to the settings menu, find the option to erase all data or specifically reset the rain gauge, and confirm the action. This clears any erroneous readings from the testing phase.

Is this answer helpful?

A

Yes, the console supports up to seven additional wireless channels. You can pair extra thermo-hygrometer sensors, soil moisture sensors, or pool sensors to these channels to monitor different locations within your property simultaneously.

Is this answer helpful?

A

If the signal strength icon shows weak bars, try relocating the display console or the outdoor sensor. Metal structures, thick concrete walls, and heavy foliage can block the radio frequency signal. Ideally, maintain a clear line of sight between the units.

Is this answer helpful?

A

No, the smart ventilating fan runs only under specific conditions. It activates when the sun shines on the solar panel and the average wind speed remains below 5 meters per second for one minute. This prevents overheating while conserving energy.

Is this answer helpful?

A

The device supports uploading data to ProWeatherLive, Weather Underground, WeatherCloud, and AWEKAS. You must create an account on these platforms to obtain a Station ID and Key for configuration within the console's setup menu.

Is this answer helpful?

A

System firmware updates require a USB flash drive formatted to FAT32 containing the .upg file. For Wi-Fi firmware, you can perform an over-the-air update via the web interface by connecting to the console's access point using a PC or Mac browser.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Comprehensive 7-in-1 sensor measures wind, rain, UV, light, temp, and humidity
  • Smart solar-powered ventilating fan ensures accurate temperature readings
  • Wide compatibility with major weather servers like Weather Underground and ProWeatherLive
  • HD TFT display provides clear visualization of complex weather data
  • Supports up to 7 optional additional wireless sensors for expanded coverage
VS

Disadvantages

  • Wireless range may be significantly reduced by metal barriers or thick concrete walls
  • Rainfall measurement requires manual resetting after initial installation to ensure accuracy
  • Requires periodic battery replacement every 2 to 2.5 years for outdoor units
  • Setup process involves multiple steps for Wi-Fi configuration and server registration
  • No mobile app included; data viewing relies on web browsers or third-party services
M: QW-35-FL

Product Specification

Type

digital

Temperature

indoor and outdoor

Humidity

indoor and outdoor

Weather Forecast

symbols

Forecasting Method

Internet

Other Displays

Time (radio-controlled clock), Date, Day of Week, Moon Phases, Soil Moisture, Rainfall, Wind Speed, Wind Direction, Stored Min/Max Temperature, Stored Min/Max Humidity, Stored Min/Max Values, Soil Moisture

Alarms

programmable weather warnings (temperature, frost), programmable temperature alarm, alarm time, snooze function

Connectable Outdoor Sensors

up to 7 (range max. 492 ft)

Outdoor Temperature Range

-40°F to 176°F

Placement

desktop device, wall mounting possible

Power Supply

5x AA batteries, mains operation

Color

gray

Package Contents

1 multi-outdoor sensor, wind sensor, rain sensor, 1 outdoor sensor

M: QW-35-FL

Product Description

Bresser WLAN HD TFT 7in1 Professional Weather Forecast Center Digital Gray

The Bresser WLAN HD TFT 7in1 Professional Weather Forecast Center Digital Gray represents a significant leap in home meteorology, offering professional-grade data directly to your living room. This sophisticated device features a high-definition color display that presents real-time weather information with stunning clarity. It is designed for serious weather enthusiasts who demand accuracy and reliability in their local forecasts.

At the heart of this system lies the wireless 7-in-1 multisensor. This robust outdoor unit captures a comprehensive array of atmospheric data including temperature, humidity, wind speed, wind direction, rainfall, UV index, and light intensity. A unique feature of this sensor is its smart ventilating fan, which is powered by a built-in solar panel. This fan automatically activates under sunny conditions or when wind speeds are low, ensuring accurate temperature readings by preventing heat buildup around the sensor.

The console serves as the command center, featuring an intuitive interface that allows users to monitor current conditions and historical trends. Through its integrated Wi-Fi capabilities, the station connects seamlessly to popular weather servers such as Weather Underground, ProWeatherLive, WeatherCloud, and AWEKAS. This connectivity enables users to share their local data globally or access advanced forecasting models tailored to their specific location.

Installation is straightforward, with clear instructions provided for mounting the sensors outdoors and pairing them with the indoor display. The system supports up to seven additional wireless channels, allowing for expanded monitoring options like soil moisture or pool temperature sensors. Whether you are tracking storm patterns or simply curious about daily weather changes, this digital gray unit provides the tools needed for precise observation.

Notes:

  • Ensure the outdoor sensor is placed at least 1.5 meters above ground level.
  • Use non-rechargeable lithium batteries for optimal performance in cold climates.
  • Regular cleaning of the rain collector is recommended every few months.
M: QW-35-FL

© Copyright 2026 Manual.ly