Manual.ly Logo

Bresser Weather Center 5-in-1 Manual

0.0 · 0 Ratings

PDF manual · 20 Pages

English

M: QW-35-FL
page

/ 20

Loading...
a5c310152aaf7d842f0b73f4428fbe85a716 page b
11
DE
GB
FR
IT
ES
Garantie / Warranty
ABOUT THIS INSTRUCTION MANUAL
These operating instructions are to be considered a component
of the device.
Please read the safety instructions and the operating instructions
carefully before use.
Keep these instructions for renewed use at a later date. When the
device is sold or given to someone else, the instruction manual must
be provided to the new owner/user of the product.
This product is intended only for private use. It was developed as an
electronic medium for the use of multimedia services.
GENERAL WARNINGS
RISK OF CHOKING!
Keep packaging material, like plastic bags and rubber bands, out of
the reach of children, as these materials pose a choking hazard.
RISK OF ELECTRIC SHOCK!
This device contains electronic components that operate via a power
source (batteries). Children should only use the device under adult
supervision. Only use the device as described in the manual; otherwise,
you run the risk of an electric shock.
RISK OF CHEMICAL BURN!!
Leaking battery acid can lead to chemical burns. Avoid contact of battery
acid with skin, eyes and mucous membranes. In the event of contact,
rinse the affected region immediately with a plenty of water and seek
medical attention.
RISK OF FIRE/EXPLOSION!
Use only the recommended batteries. Do not short-circuit the device or
batteries, or throw them into a fire. Excessive heat or improper handling
could trigger a short-circuit, a fire or an explosion.
NOTE!
Do not disassemble the device. In the event of a defect, please contact
your dealer. The dealer will contact the Service Centre and can send the
device in to be repaired, if necessary.
Do not immerse the unit in water.
Protect the device from severe shocks!
Use only the recommended batteries. Always replace weak or empty
batteries with a new, complete set of batteries at full capacity. Do not
use batteries from different brands or with different capacities. Remove
the batteries from the unit if it has not been used for a long time.
The manufacturer is not liable for damage related to improperly
installed batteries!
SCOPE OF DELIVERY (FIG. 1)
Main unit (A), table stand for main unit (B), remote sensor (C), mounting
material, instruction manual
Required batteries (not included with purchase): 6 pieces of micro
batteries (1.5V, type AA)
PARTS OVERVIEW
Main unit (Fig. 2)
1. SNOOZE / LIGHT button 2. HISTORY button
3. MAX/MIN button 4.
button
5.
button 6. button
7. INDEX-Taste 8.
button
9.
button 10. button
11.
button 12. button
13. °C/°F slide switch 14. RCC button
15. SCAN button 16. RESET knob
17. Battery compartment 18. Alert LED indicator
19. LCD display with backlight 20. Table stand
Remote sensor (Fig. 3)
21. Rain collector (Sinkhole) 22. Circular level
23. Antenna 24. Wind cups
25. Mounting pole 26. Radiation shield
27. Wind vane 28. Mounting base
29. Mounting claim 30. Red LED indicator
31. RESET button 32. Battery door
33. Mounting screws
Remote sensor single parts
Rain gauge (Fig. 4)
34. Rain collector (Sinkhole) 35. Tipping bucket
36. Rain sensor 37. Drain holes
Temperature and humidity sensor (Fig. 5)
38. Radiation shield/protection
39. Sensor casing (Temperature and humidity sensor)
Wind sensor (Fig. 6)
40. Wind cups (Anemometer) 41. Wind vane
LCD DISPLAY
Time / Calendar / Moon phases (Fig. 7)
1. MAX/MIN/PREVIOUS DATA indicator
2. Low battery indicator for main unit
3. Time 4. Ice pre-alert on
5.
RC Signal strength indicator
6. Daylight saving time (DST) icon
7. Moon phase 8. Day of the week
9. Alarm icon 10. Date
11. Month
Indoor temperature and humidity (Fig. 8)
12. Comfort/cold/hot icon 13. Indoor indicator
14. Indoor humidity 15. HI / LO Alert and alarm on
16. Indoor temperature
Outdoor temperature and humidity (Fig. 9)
17. Outdoor signal strength indicator
18. Outdoor indicator 19. Outdoor humidity
20.
HI / LO Alert and alarm on
21. Outdoor temperature
22. Low battery indicator for sensor
12-hour weather forecast (Fig. 10)
23.
Weather forecast indicator
24. Weather forecast icon
Barometer (Fig. 11)
25. Barometer indicator 26. Histogram
27. ABSOLUTE/RELATIVE pressure indicator
28. Barometer measurement unit (hPa / inHg / mmHg)
29. Barometer reading 30. Hourly records indicator
Rainfall (Fig. 12)
31. Rainfall indicator 32. Time range record indicator
33. Day records indicator 34. Histogram
35. HI Alert and alarm on 36. Current rainfall rate
37. Rainfall unit (in / mm)
Wind direction / wind speed (Fig. 13)
38. Wind direction indicator
39. Wind direction indicator(s) during last hour
40. Current wind direction indicator
41. Wind speed indicator
42. Wind levels and indicator 43. Beaufort scale reading
44. Current wind direction reading
45. Average/Gust wind indicator
46. Wind speed unit (mph / m/s / km/h / knot)
47. Hi Alert and Alarm
Wind chill/ Heat index/ Indoor dewpoint (Fig. 14)
48. Wind chill/ Heat index/ Indoor dewpoint indicator
49. Wind chill/ Heat index/ Indoor dewpoint reading

Chat with your Bresser Weather Center 5-in-1 manual using AI

Get instant AI answers from your Bresser Weather Center 5-in-1 manual

Ask anything about the Bresser Weather Center 5-in-1. Answers come from this manual, with the pages they are based on.

Weather Center 5-in-1 Maintenance Schedule

As needed
Clean rain collector

Rotate collector 30 degrees anticlockwise, remove, clean debris and insects, then reinstall when fully dry.

Show in the manual (page 16)
As needed
Clean thermo/hygro sensor

Remove radiation shield screws, pull out shield, clean casing and shield parts carefully ensuring sensors stay dry.

Show in the manual (page 16)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Weather Center 5-in-1?

Yes No

Frequently Asked Questions

A

Press the reset button on the bottom of the sensor or the main unit to clear errors. For the sensor, hold the button until the light indicates action. This clears historical data and re-establishes the pairing code.

Is this answer helpful?

A

The base station is for indoor use with a clear display. The sensor remains outdoors for accurate environmental readings. Ensure the indoor unit is placed away from direct heat sources.

Is this answer helpful?

A

Batteries typically last several months depending on usage. Low battery indicators appear on the display near the time or temperature reading requiring replacement with fresh AA batteries.

Is this answer helpful?

A

Yes the sensor measures current direction and trends from the last hour. It displays 16 directions on the LCD with the compass rose for better orientation.

Is this answer helpful?

A

Accuracy depends on proper leveling and cleaning of the funnel components regularly. Ensure the sensor is level and clear of insects for precise tracking.

Is this answer helpful?

A

Pressure based forecasts are generally accurate around 70 to 75 percent of the time. It should be used as a guide rather than absolute weather prediction.

Is this answer helpful?

A

Yes you can switch between metric and imperial units for temperature and wind. Use the buttons on the main unit to toggle between Celsius and Fahrenheit.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • 1. Wireless transmission up to 150 meters ensures flexible placement for sensors.
  • 2. 12-hour weather forecast provides reliable planning tools for daily activities.
  • 3. Includes indoor and outdoor measurement for total comfort and climate monitoring.
  • 4. Max/Min memory captures historical weather data for pattern analysis.
  • 5. Radio-controlled clock keeps time accurate automatically without manual adjustment.
VS

Disadvantages

  • 1. Signal range reduces significantly with building obstructions or metal interference.
  • 2. Sensor requires manual reset after battery replacement to re-establish connection.
  • 3. No app integration for remote smartphone access to view current data.
  • 4. Rain collector needs frequent cleaning to stay accurate and prevent debris.
  • 5. Wind sensor must be mounted at least 1.5 meters high for correct reading.
M: QW-35-FL

Product Specification

Type

digital

Temperature

indoor and outdoor

Humidity

indoor and outdoor

Outdoor temperature range

-40°F to 176°F

M: QW-35-FL

Product Description

Discover Precision Weather Monitoring

Welcome to the world of home weather stations. The Bresser 5-in-1 Weather Forecast Center Digital Manual guides users through advanced meteorological tracking capabilities. This device transforms your home into a personal observatory capable of providing real-time atmospheric data. It is designed for privacy and detailed analysis of environmental conditions.

Advanced Sensing Technology

At the core lies the 5-in-1 outdoor sensor which captures wind speed, direction, rainfall, temperature, and humidity simultaneously. Data transfer to the base station happens wirelessly up to 150 meters under line of sight conditions. This range allows flexible placement away from heavy obstructions like trees or walls. The base station features a clear LCD display with a backlight for night viewing. Users can view moon phases, calendar dates, and weather trends for the next twelve hours dynamically. Barometric pressure tracking enables reliable forecasts based on atmospheric changes. Indoor and outdoor climates are monitored independently for comprehensive comfort levels using the comfort indicator. Wind chill factors are also calculated for accurate perception of how cold it feels outside.

User-Friendly Operation

Setting up the system is straightforward for most users. Batteries power both the main unit and the remote sensor independently. Once activated, the device syncs automatically within minutes without complex pairing. Users can adjust settings for metric or imperial units easily. The interface displays comfort indices based on specific indoor climate conditions. High and low alarms alert you to extreme temperatures or rainfall amounts immediately. A history function records data from the previous twenty-four hours for review. You can retrieve past weather patterns to analyze trends over time effectively. The clock includes a radio-controlled function for accurate timekeeping. The Beaufort scale helps understand wind force levels visually. You can also reset max and min values as needed for fresh data.

Maintenance and Reliability

Regular cleaning ensures accuracy over prolonged usage periods. The rain collector requires periodic clearing of leaves and debris to prevent blockages. The wind cups must remain unobstructed to measure gusts correctly without error. The manufacturer recommends using fresh batteries for optimal range and performance. Proper grounding of the sensor is essential for electrical safety during storms. The weather station withstands various conditions with durable materials suitable for outdoors. Ensure the sensor points north in the Northern hemisphere. Cleaning the thermo sensor housing prevents insects from entering the casing and damaging components. Always check the sealing rings to maintain water resistance.

Conclusion

Homeowners seeking precise data will appreciate this robust system greatly. Whether tracking severe weather or monitoring everyday changes, the station delivers consistent results. It integrates seamlessly into daily routines without requiring professional installation services. Following the setup steps guarantees connectivity stability throughout the operation season. Enjoy informed decisions regarding outdoor activities and planning. This tool serves as an invaluable asset for weather enthusiasts globally. Keep the device dry and clean for long life and accuracy.

M: QW-35-FL

© Copyright 2026 Manual.ly