Manual.ly Logo

Bresser Meteo THBM Colour Manual

0.0 · 0 Ratings

PDF manual · 36 Pages

English

M: QW-35-FL
page

/ 36

Loading...
0931bfba2be993438c9b07ce7b687477eb73 page 6
6 / 36
• Never leave children unattended when handling the device! Follow the instructions carefully and
do not attempt to power this device with anything other than power sources recommended in this
instruction manual, otherwise there is a danger of an electric shock!
• Disconnect the power supply by pulling the mains plug when the appliance is not in use, in case of
a longer interruption of operation and before any maintenance and cleaning work.
• Place your device so that it can be disconnected from the power supply at any time. The power
outlet should always be near your appliance and should be easily accessible, as the plug of the
power cord serves as a disconnect device from the mains supply.
• To disconnect the unit from the mains, always pull the mains plug and never pull the cable!
• Check this device, cables and connections for damage before use.
• Never attempt to operate a damaged device, or a device with damaged electrical parts! Damaged
parts must be replaced immediately by an authorized service agent.
• Operate the device only in a completely dry environment and do not touch the device with wet or
damp body parts.
DANGER
Danger of suffocation!
Improper use of this product may result in suffocation, especially for children. It is therefore imperative
that you observe the following safety information.
• Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a danger
of choking!
• This product contains small parts that can be swallowed by children! Choking hazard!
DANGER
Explosion hazard!
Improper use of this product may result in fire. It is essential that you observe the following safety in-
formation in order to avoid fires.
• Do not expose the device to high temperatures. Use only the supplied AC adapter or the recom-
mended batteries. Do not short-circuit the device or batteries or dispose of in fire! Excessive heat
and improper handling can cause short circuits, fires and even explosions!
NOTICE
Danger of material damage!
Improper handling may result in damage to the unit and/or accessories. Therefore, use the device only
in accordance with the following safety information.
• Do not disassemble the device! In the event of a defect, please contact your dealer. They will con-
tact the Service Center and can arrange the return of this device for repair if necessary.
• Do not expose the device to high temperatures and protect it from water and high humidity.
• Do not immerse the unit in water!
• Do not subject the device to excessive vibrations.
• Only use accessories and spare parts for this device that comply with the technical specifications.
• Use only the recommended batteries. Always replace weak or empty batteries with a new, com-
plete set of batteries at full capacity. Do not use batteries from different brands or types or with dif-
ferent capacities. Remove batteries from the device if it is not to be used for a longer period of
time!
• Do not use rechargeable batteries (accumulators).

Chat with your Bresser Meteo THBM Colour manual using AI

Get instant AI answers from your Bresser Meteo THBM Colour manual

Ask anything about the Bresser Meteo THBM Colour. Answers come from this manual, with the pages they are based on.

Meteo THBM Colour Maintenance Schedule

When weak or depleted
Replace batteries in base unit and sensor

Replace weak or used batteries with a complete new set of full capacity. Do not mix brands, types, or capacities.

Before cleaning or maintenance
Disconnect power supply

Unplug the mains adapter before any maintenance or cleaning work to avoid electric shock.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Meteo THBM Colour?

Yes No

Frequently Asked Questions

A

Ensure both devices are on the same channel. Press the SENSOR button on the base unit to initiate reception. The signal icon will flash until the connection is established, which usually takes a few minutes.

Is this answer helpful?

A

No, the manual explicitly states not to use rechargeable batteries (accumulators). Use standard alkaline or lithium batteries as recommended for the base unit and remote sensor to ensure proper operation.

Is this answer helpful?

A

If powered by batteries, the station enters power-saving mode after six seconds, turning off the display. You can reactivate it by pressing the snooze button, but all previous settings may be lost if power is switched completely.

Is this answer helpful?

A

Yes, it calculates a weather trend for the next 12 hours based on barometric pressure changes. However, it provides a general forecast rather than a precise prediction of specific precipitation times.

Is this answer helpful?

A

The remote sensor is weather-proof, but it should still be placed away from direct sunlight, heavy rain, or snow to ensure longevity and accurate readings. Do not submerge it in water.

Is this answer helpful?

A

Press and hold the RESET button located on the back of the base unit or the remote sensor to restore factory defaults. Be aware that this will erase all custom alarms and saved data.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Vibrant colour display provides clear visual cues for climate comfort levels
  • Wireless remote sensor offers flexible placement up to 30 meters away
  • Comprehensive data including heat index, dew point, and moon phases
  • Automatic 24-hour history recording helps track weather trends
  • Customizable HI/LO alarms for temperature and humidity safety
VS

Disadvantages

  • Battery mode deactivates display after six seconds to save power
  • Settings are lost if switching between mains and battery power sources
  • Transmission range can be reduced by thick walls or electronic interference
  • Moon phase data is limited to the northern hemisphere only
  • Initial setup requires careful channel matching between base and sensor
M: QW-35-FL

Product Specification

Type

digital

Temperature

indoor and outdoor

Humidity

indoor and outdoor

Weather forecast

symbols

Other displays

time (radio clock), date, day of week, moon phases, stored min/max temperature

Alarms

temperature alarm, wake time, snooze function

Connectable outdoor sensors

up to 8

Placement

desktop device, wall mounting possible

Power supply

2x AA batteries, mains operation

Package contents

1 outdoor sensor

M: QW-35-FL

Product Description

Discover the Bresser Meteo THBM Colour Digital Weather Station

The Bresser Meteo THBM Colour Digital Weather Station represents a perfect blend of functionality and modern design, offering homeowners comprehensive meteorological data at a glance. This advanced device goes beyond simple temperature readings, providing a detailed analysis of your indoor and outdoor environment through its vibrant colour display. Whether you are planning your day, monitoring comfort levels, or tracking long-term weather patterns, this station delivers accurate insights to keep you informed.

At the heart of this system is the base unit paired with a wireless remote sensor. The base station features an intuitive interface where users can toggle between Celsius and Fahrenheit, view real-time humidity trends, and monitor atmospheric pressure changes. The colour screen enhances usability by displaying climate indicators that show if conditions are too cold, optimal, or too warm. For those interested in astronomy, the station also tracks moon phases for the northern hemisphere, adding an educational element to daily observation.

The wireless sensor ensures flexibility in placement, allowing you to measure outdoor conditions from up to 30 meters away without wiring hassles. It transmits data on temperature and humidity, which the base unit processes to calculate vital metrics like the heat index and dew point. These calculations help users understand how the weather feels rather than just what it measures, providing crucial information during hot summer days or humid periods.

Beyond real-time data, the station excels in historical tracking. It automatically records measurements for the past 24 hours, allowing users to review hourly trends via the history button. Additionally, it stores maximum and minimum values for temperature and humidity until manually reset, making it easy to identify extreme weather events over time. The barometric pressure feature includes absolute and relative settings, enabling more precise weather forecasting based on local sea-level data.

Safety and convenience are paramount in its design. The device supports both mains power and battery operation, ensuring continuous timekeeping even during power outages. Users can set custom alarms for temperature and humidity thresholds, receiving audible alerts when conditions exceed safe or comfortable limits. The inclusion of a snooze function and adjustable alarm settings makes it a versatile tool for daily routines as well as weather monitoring.

Key Notes

  • The station requires synchronization with the outdoor sensor before automatic time setting via radio signal becomes available.
  • Battery life varies significantly between mains and battery-only operation modes.
  • External interference from metal structures or other electronics can affect the transmission range of the sensor.
M: QW-35-FL

© Copyright 2026 Manual.ly