Manual.ly Logo

Bosch DIY UniversalImpact 700 Manual

0.0 · 0 Ratings

PDF manual · 118 Pages

English

M: QW-35-FL
page

/ 118

Loading...
e35a37d115b73ee91ece09e9be990796fe8c page e
14 | Deutsch
1 609 92A 2A0 | (17.11.16) Bosch Power Tools
Zur Wiederinbetriebnahme lassen Sie den Ein-/Ausschalter
los und betätigen Sie ihn erneut.
Ist die Funktion Kickback Control defekt, lässt sich die
Bohrmaschine nicht mehr einschalten. Lassen Sie das
Elektrowerkzeug nur von qualifiziertem Fachpersonal
und nur mit Original-Ersatzeilen reparieren.
Drehzahl/Schlagzahl einstellen
Sie können die Drehzahl/Schlagzahl des eingeschalteten
Elektrowerkzeugs stufenlos regulieren, je nachdem, wie weit
Sie den Ein-/Ausschalter 6 eindrücken.
Leichter Druck auf den Ein-/Ausschalter 6 bewirkt eine nied-
rige Drehzahl/Schlagzahl. Mit zunehmendem Druck erhöht
sich die Drehzahl/Schlagzahl.
Drehzahl/Schlagzahl vorwählen
Mit dem Stellrad Drehzahlvorwahl 7 können Sie die benötigte
Drehzahl/Schlagzahl auch während des Betriebes vorwählen.
Die erforderliche Drehzahl/Schlagzahl ist vom Werkstoff und
den Arbeitsbedingungen abhängig und kann durch prakti-
schen Versuch ermittelt werden.
Arbeitshinweise
Ziehen Sie vor allen Arbeiten am Elektrowerkzeug den
Netzstecker aus der Steckdose.
Setzen Sie das Elektrowerkzeug nur ausgeschaltet auf
die Mutter/Schraube auf. Sich drehende Einsatzwerk-
zeuge können abrutschen.
Nach längerem Arbeiten mit kleiner Drehzahl sollten Sie das
Elektrowerkzeug zur Abkühlung ca. 3 Minuten lang bei maxi-
maler Drehzahl im Leerlauf drehen lassen.
Staubauffangvorrichtung abnehmen (siehe Bilder N – P)
Das Entfernen der Staubauffangvorrichtung 13 ist sinnvoll:
– um die Schiene vom Drill Assistant 10 als Tiefenanschlag
zu nutzen
– wenn große Einsatzwerkzeuge verwendet werden (z. B.
Lochsäge).
Wartung und Service
Wartung und Reinigung
Ziehen Sie vor allen Arbeiten am Elektrowerkzeug den
Netzstecker aus der Steckdose.
Halten Sie das Elektrowerkzeug und die Lüftungs-
schlitze sauber, um gut und sicher zu arbeiten.
Wenn ein Ersatz der Anschlussleitung erforderlich ist, dann
ist dies von Bosch oder einer autorisierten Kundendienststel-
le für Bosch-Elektrowerkzeuge auszuführen, um Sicherheits-
gefährdungen zu vermeiden.
Kundendienst und Anwendungsberatung
Der Kundendienst beantwortet Ihre Fragen zu Reparatur und
Wartung Ihres Produkts sowie zu Ersatzteilen. Explosions-
zeichnungen und Informationen zu Ersatzteilen finden Sie
auch unter:
www.bosch-pt.com
Das Bosch-Anwendungsberatungs-Team hilft Ihnen gerne bei
Fragen zu unseren Produkten und deren Zubehör.
www.bosch-do-it.de, das Internetportal für Heimwerker und
Gartenfreunde.
www.1-2-do.com
In der Heimwerker-Community 1-2-do.com können Sie
Produkttester werden, Ideen sammeln oder sich mit anderen
Heimwerkern austauschen.
www.diy-academy.eu, das komplette Service-Angebot der
DIY Academy.
Geben Sie bei allen Rückfragen und Ersatzteilbestellungen
bitte unbedingt die 10-stellige Sachnummer laut Typenschild
des Produkts an.
Deutschland
Robert Bosch Power Tools GmbH
Servicezentrum Elektrowerkzeuge
Zur Luhne 2
37589 Kalefeld – Willershausen
Unter www.bosch-pt.de können Sie online Ersatzteile
bestellen oder Reparaturen anmelden.
Kundendienst: Tel.: (0711) 40040480
Fax: (0711) 40040481
E-Mail: Servicezentrum.Ele[email protected]osch.com
Anwendungsberatung: Tel.: (0711) 40040480
Fax: (0711) 40040482
E-Mail: kundenberatung.ew@de.bosch.com
Österreich
Unter www.bosch-pt.at können Sie online Ersatzteile
bestellen.
Tel.: (01) 797222010
Fax: (01) 797222011
E-Mail: service.elektrowerkzeu[email protected].com
Schweiz
Unter www.bosch-pt.com/ch/de können Sie online Ersatz-
teile bestellen.
Tel.: (044) 8471511
Fax: (044) 8471551
E-Mail: [email protected]h.com
Luxemburg
Tel.: +32 2 588 0589
Fax: +32 2 588 0595
E-Mail: outillage.gere[email protected]osch.com
Entsorgung
Elektrowerkzeuge, Zubehör und Verpackungen sollen einer
umweltgerechten Wiederverwertung zugeführt werden.
Werfen Sie Elektrowerkzeuge nicht in den Hausmüll!
Nur für EU-Länder:
Gemäß der Europäischen Richtlinie
2012/19/EU über Elektro- und Elektronik-
Altgeräte und ihrer Umsetzung in nationales
Recht müssen nicht mehr gebrauchsfähige
Elektrowerkzeuge getrennt gesammelt und
einer umweltgerechten Wiederverwertung
zugeführt werden.
Änderungen vorbehalten.
OBJ_BUCH-2862-001.book Page 14 Thursday, November 17, 2016 2:40 PM

Chat with your Bosch DIY UniversalImpact 700 manual using AI

Get instant AI answers from your Bosch DIY UniversalImpact 700 manual

Ask anything about the Bosch DIY UniversalImpact 700. Answers come from this manual, with the pages they are based on.

UniversalImpact 700 Maintenance Schedule

After every use
Empty dust box

Remove the dust box by pressing unlocking buttons and pull down. Empty it and reinsert until it clicks.

Show in the manual (page 12)
As needed
Clean machine and ventilation slots

Keep the machine and ventilation slots clean for safe and proper working before any work.

Show in the manual (page 14)
When worn
Replace dust protection ring

Replace the dust protection ring when worn or damaged, especially after working with large drill-bit diameters.

Show in the manual (page 20)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend UniversalImpact 700?

Yes No

Frequently Asked Questions

A

This machine is designed for impact drilling in brick concrete and stone as well as for drilling in wood metal ceramic and plastic. It can also be used for screwdriving when using the appropriate mode and bits.

Is this answer helpful?

A

Open the keyless chuck by turning it in the correct direction. Insert the tool and tighten the collar by hand until you hear a click. This automatically locks the chuck for secure holding.

Is this answer helpful?

A

Yes the drill includes a depth stop feature. You can set the desired drilling depth manually using the stop mechanism on the auxiliary handle to ensure consistent results on your workpiece.

Is this answer helpful?

A

Always wear eye protection when operating the tool. It is also recommended to wear hearing protection especially during impact drilling. Use dust masks when working with materials that create harmful dust.

Is this answer helpful?

A

No the dust box is intended for concrete and stone drilling. Using it for metal work is dangerous because hot metal chips can ignite parts of the dust box causing a fire hazard.

Is this answer helpful?

A

There is a rotational direction switch on the tool. Push it to the left for right rotation or to the right for left rotation. Do this only when the tool is switched off to prevent damage.

Is this answer helpful?

A

The electronic control helps maintain speed under load. If the tool jams the switch turns off immediately on kickback control models. Allow the tool to cool down if used for long periods at low speeds.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Versatile for drilling masonry wood and metal
  • Keyless chuck for quick bit changes
  • Variable speed control with trigger
  • Ergonomic handle for better control
  • Includes Drill Assistant dust management
VS

Disadvantages

  • Vibration levels are high during impact drilling
  • Noise levels require ear protection
  • Dust box has limited capacity
  • Weight increases with drill assistant
  • Requires specific voltage compatibility
M: QW-35-FL

Product Specification

Type

Hammer Drill

Power

700 W

No-load Speed

50-3,000 RPM

No-load Impact Rate

45,000 BPM

Drilling Capacity

Wood 1.18 in, Steel 0.47 in, Concrete 0.55 in

Torque

12.54 ft-lb

Chuck

0.08-0.51 inch Keyless Chuck

M: QW-35-FL

Product Description

The Bosch DIY UniversalImpact 700 Electric Impact Drill Manual Experience

When tackling home improvement projects, having a reliable power tool is essential for success. The Bosch DIY UniversalImpact 700 Electric Impact Drill is designed for versatility and durability. It handles everything from drilling masonry to driving screws in wood or metal. This tool combines significant power and precision for the serious do-it-yourself enthusiast looking for quality results in their household or garden repairs.

Key Features and Performance

The 700 Watt motor provides ample torque for tough jobs like driving large screws or boring into concrete walls. You can adjust the speed to match the specific material you are working with using the thumbwheel. Whether you are boring into hard brick or softwood, the variable trigger allows for precise control over the operation. The keyless chuck makes changing bits quick and easy which saves time and frustration.

Comfort and Safety Design

Holding the tool securely is important for safety and accuracy on the job site. The ergonomic auxiliary handle helps maintain balance and control during extended use for large drills. Some models include a Drill Assistant attachment for dust extraction. This keeps your workspace clean and reduces health risks from airborne particles. Always wear eye protection and follow all safety guidelines to ensure a safe working environment while operating this machine.

Versatility in Action

This drill is not just for making holes in the wall or floor. You can use it for screwdriving when switched to the rotation mode properly. The electronic control ensures constant speed under load so the motor does not stall when working against resistance. The reverse function helps remove stuck screws easily without damaging the workpiece or stripping heads. Proper maintenance ensures consistent performance over many years of active use.

Important Notes for Users

Keep the tool maintained regularly by clearing dust from vents to prevent overheating. Check cords for damage before every use to prevent electrical hazards or shocks. Avoid operating in wet conditions or heavy rain for safety. Store the tool in a dry place when not in use. Regular cleaning of vents ensures longevity and prevents overheating during heavy projects around the home.

Additional features include a depth stop for consistent hole depths and a dust box for clean drilling. These add-ons help you achieve professional results without unnecessary mess or errors in your measurements during construction work.

Technical Specifications Overview

Understanding the technical details helps you choose the right setup for your project effectively. The machine operates at standard voltage levels suitable for most European outlets. It supports a range of drill bits up to specific diameters for masonry and metal. Knowing these limits prevents damage to the drill or the material being worked on during heavy duty tasks.

M: QW-35-FL

© Copyright 2026 Manual.ly