Manual.ly Logo

Bosch DIY UniversalImpact 700 Manual

0.0 · 0 Ratings

PDF manual · 118 Pages

English

M: QW-35-FL
page

/ 118

Loading...
e35a37d115b73ee91ece09e9be990796fe8c page f
English | 15
Bosch Power Tools 1 609 92A 2A0 | (17.11.16)
English
Safety Notes
General Power Tool Safety Warnings
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
WARNING
OBJ_BUCH-2862-001.book Page 15 Thursday, November 17, 2016 2:40 PM

Chat with your Bosch DIY UniversalImpact 700 manual using AI

Get instant AI answers from your Bosch DIY UniversalImpact 700 manual

Ask anything about the Bosch DIY UniversalImpact 700. Answers come from this manual, with the pages they are based on.

UniversalImpact 700 Maintenance Schedule

After every use
Empty dust box

Remove the dust box by pressing unlocking buttons and pull down. Empty it and reinsert until it clicks.

Show in the manual (page 12)
As needed
Clean machine and ventilation slots

Keep the machine and ventilation slots clean for safe and proper working before any work.

Show in the manual (page 14)
When worn
Replace dust protection ring

Replace the dust protection ring when worn or damaged, especially after working with large drill-bit diameters.

Show in the manual (page 20)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend UniversalImpact 700?

Yes No

Frequently Asked Questions

A

This machine is designed for impact drilling in brick concrete and stone as well as for drilling in wood metal ceramic and plastic. It can also be used for screwdriving when using the appropriate mode and bits.

Is this answer helpful?

A

Open the keyless chuck by turning it in the correct direction. Insert the tool and tighten the collar by hand until you hear a click. This automatically locks the chuck for secure holding.

Is this answer helpful?

A

Yes the drill includes a depth stop feature. You can set the desired drilling depth manually using the stop mechanism on the auxiliary handle to ensure consistent results on your workpiece.

Is this answer helpful?

A

Always wear eye protection when operating the tool. It is also recommended to wear hearing protection especially during impact drilling. Use dust masks when working with materials that create harmful dust.

Is this answer helpful?

A

No the dust box is intended for concrete and stone drilling. Using it for metal work is dangerous because hot metal chips can ignite parts of the dust box causing a fire hazard.

Is this answer helpful?

A

There is a rotational direction switch on the tool. Push it to the left for right rotation or to the right for left rotation. Do this only when the tool is switched off to prevent damage.

Is this answer helpful?

A

The electronic control helps maintain speed under load. If the tool jams the switch turns off immediately on kickback control models. Allow the tool to cool down if used for long periods at low speeds.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Versatile for drilling masonry wood and metal
  • Keyless chuck for quick bit changes
  • Variable speed control with trigger
  • Ergonomic handle for better control
  • Includes Drill Assistant dust management
VS

Disadvantages

  • Vibration levels are high during impact drilling
  • Noise levels require ear protection
  • Dust box has limited capacity
  • Weight increases with drill assistant
  • Requires specific voltage compatibility
M: QW-35-FL

Product Specification

Type

Hammer Drill

Power

700 W

No-load Speed

50-3,000 RPM

No-load Impact Rate

45,000 BPM

Drilling Capacity

Wood 1.18 in, Steel 0.47 in, Concrete 0.55 in

Torque

12.54 ft-lb

Chuck

0.08-0.51 inch Keyless Chuck

M: QW-35-FL

Product Description

The Bosch DIY UniversalImpact 700 Electric Impact Drill Manual Experience

When tackling home improvement projects, having a reliable power tool is essential for success. The Bosch DIY UniversalImpact 700 Electric Impact Drill is designed for versatility and durability. It handles everything from drilling masonry to driving screws in wood or metal. This tool combines significant power and precision for the serious do-it-yourself enthusiast looking for quality results in their household or garden repairs.

Key Features and Performance

The 700 Watt motor provides ample torque for tough jobs like driving large screws or boring into concrete walls. You can adjust the speed to match the specific material you are working with using the thumbwheel. Whether you are boring into hard brick or softwood, the variable trigger allows for precise control over the operation. The keyless chuck makes changing bits quick and easy which saves time and frustration.

Comfort and Safety Design

Holding the tool securely is important for safety and accuracy on the job site. The ergonomic auxiliary handle helps maintain balance and control during extended use for large drills. Some models include a Drill Assistant attachment for dust extraction. This keeps your workspace clean and reduces health risks from airborne particles. Always wear eye protection and follow all safety guidelines to ensure a safe working environment while operating this machine.

Versatility in Action

This drill is not just for making holes in the wall or floor. You can use it for screwdriving when switched to the rotation mode properly. The electronic control ensures constant speed under load so the motor does not stall when working against resistance. The reverse function helps remove stuck screws easily without damaging the workpiece or stripping heads. Proper maintenance ensures consistent performance over many years of active use.

Important Notes for Users

Keep the tool maintained regularly by clearing dust from vents to prevent overheating. Check cords for damage before every use to prevent electrical hazards or shocks. Avoid operating in wet conditions or heavy rain for safety. Store the tool in a dry place when not in use. Regular cleaning of vents ensures longevity and prevents overheating during heavy projects around the home.

Additional features include a depth stop for consistent hole depths and a dust box for clean drilling. These add-ons help you achieve professional results without unnecessary mess or errors in your measurements during construction work.

Technical Specifications Overview

Understanding the technical details helps you choose the right setup for your project effectively. The machine operates at standard voltage levels suitable for most European outlets. It supports a range of drill bits up to specific diameters for masonry and metal. Knowing these limits prevents damage to the drill or the material being worked on during heavy duty tasks.

M: QW-35-FL

© Copyright 2026 Manual.ly