Manual.ly Logo

Bosch DIY PSS 200 A Manual

5.0 · 1 Ratings

PDF manual · 65 Pages

English

M: OA-GPT-5-NAN
page

/ 65

Loading...
6cb373d2c912349ade6db753cdedeb1a3a74 page 8
8 | Deutsch
1 609 92A 1XL | (15.6.16) Bosch Power Tools
Schleifblätter ohne Kletthaftung
(PSS 190 AC/PSS 200 AC/PSS 250 AE) (siehe Bild B)
Heben Sie die Klemmbügel 4 leicht an und hängen Sie
diese aus.
Führen Sie das Schleifblatt 6 bis zum Anschlag unter den ge-
öffneten hinteren Klemmbügel 4 und spannen Sie das Schleif-
blatt durch Einhängen des Klemmbügels 4 fest.
Legen Sie das Schleifblatt 6 straff um die Schleifplatte. Füh-
ren Sie das andere Ende des Schleifblattes 6 unter den vorde-
ren Klemmbügel 4 und spannen Sie das Schleifblatt durch
Einhängen des Klemmbügels 4 fest.
Ungelochte Schleifblätter, z. B. von Rollen- bzw. Meterware,
können Sie für die Staubabsaugung mit dem Lochwerkzeug
11 lochen. Drücken Sie dazu das Elektrowerkzeug mit mon-
tiertem Schleifblatt auf das Lochwerkzeug (siehe Bild E).
Zum Abnehmen des Schleifblattes 6 lösen Sie die Klemmbü-
gel 4 und ziehen das Schleifblatt heraus.
Wahl des Schleifblattes
Entsprechend dem zu bearbeitenden Material und dem ge-
wünschten Abtrag der Oberfläche sind unterschiedliche
Schleifblätter verfügbar:
Staub-/Späneabsaugung
Vermeiden Sie Staubansammlungen am Arbeitsplatz.
Stäube können sich leicht entzünden.
Stäube von Materialien wie bleihaltigem Anstrich, einigen
Holzarten, Mineralien und Metall können gesundheits-
schädlich sein. Berühren oder Einatmen der Stäube kön-
nen allergische Reaktionen und/oder Atemwegserkran-
kungen des Benutzers oder in der Nähe befindlicher
Personen hervorrufen.
Bestimmte Stäube wie Eichen- oder Buchenstaub gelten
als krebserzeugend, besonders in Verbindung mit Zusatz-
stoffen zur Holzbehandlung (Chromat, Holzschutzmittel).
Asbesthaltiges Material darf nur von Fachleuten bearbeitet
werden.
– Benutzen Sie möglichst eine für das Material geeignete
Staubabsaugung.
– Sorgen Sie für gute Belüftung des Arbeitsplatzes.
– Es wird empfohlen, eine Atemschutzmaske mit
Filterklasse P2 zu tragen.
Beachten Sie in Ihrem Land gültige Vorschriften für die zu
bearbeitenden Materialien.
Eigenabsaugung mit Staubbox (siehe Bild C1 –C4)
Setzen Sie die Staubbox 3 auf den Ausblasstutzen 8 auf, bis
sie einrastet.
Zum Entleeren der Staubbox 3 ziehen Sie die Staubbox nach
unten ab.
Vor dem Öffnen der Staubbox 3 sollten Sie mit der Staubbox
wie im Bild gezeigt auf eine feste Unterlage klopfen, um den
Staub vom Filterelement zu lösen.
Fassen Sie die Staubbox 3 an der Griffmulde, klappen Sie das
Filterelement 9 nach oben weg und entleeren Sie die Staub-
box. Reinigen Sie die Lamellen des Filterelements 9 mit einer
weichen Bürste.
Fremdabsaugung (siehe Bild D)
Stecken Sie einen Absaugschlauch 10 auf den Ausblasstut-
zen 8. Verbinden Sie den Absaugschlauch 10 mit einem
Staubsauger. Eine Übersicht zum Anschluss an verschiedene
Staubsauger finden Sie am Ende dieser Anleitung.
Der Staubsauger muss für den zu bearbeitenden Werkstoff
geeignet sein.
Verwenden Sie beim Absaugen von besonders gesundheits-
gefährdenden, krebserzeugenden oder trockenen Stäuben
einen Spezialsauger.
Betrieb
Inbetriebnahme
Beachten Sie die Netzspannung! Die Spannung der
Stromquelle muss mit den Angaben auf dem Typen-
schild des Elektrowerkzeuges übereinstimmen. Mit
230 V gekennzeichnete Elektrowerkzeuge können
auch an 220 V betrieben werden.
Um Energie zu sparen, schalten Sie das Elektrowerk-
zeug nur ein, wenn Sie es benutzen.
Ein-/Ausschalten
Schieben Sie zur Inbetriebnahme des Elektrowerkzeuges
den Ein-/Ausschalter 2 nach vorn in Position „I“.
Um das Elektrowerkzeug auszuschalten schieben Sie den
Ein-/Ausschalter 2 nach hinten in Position „0“.
Schwingzahl vorwählen (PSS 250 AE)
Mit dem Stellrad Schwingzahlvorwahl 1 können Sie die benö-
tigte Schwingzahl auch während des Betriebes vorwählen.
Körnung
Zur Bearbeitung sämtlicher
Holzwerkstoffe
40—240
Zum Vorschleifen, z.B. von
rauen, ungehobelten Balken
und Brettern grob 40, 60
Zum Planschleifen und zum
Ebnen kleinerer Unebenheiten mittel 80, 100, 120
Zum Fertig- und Feinschleifen
harter Hölzer fein 180, 240
Zur Bearbeitung von
Farb-/Lackschichten bzw.
Grundierungen wie Füller
und Spachtel
40—320
Zum Abschleifen von Farbe grob 40, 60
Zum Schleifen von
Vorstreichfarbe mittel 80, 100, 120
Zum Endschliff von Grundie-
rungen vor der Lackierung fein 180, 240, 320
OBJ_BUCH-60-006.book Page 8 Wednesday, June 15, 2016 4:07 PM

Chat with your Bosch DIY PSS 200 A manual using AI

Get instant AI answers from your Bosch DIY PSS 200 A manual

Ask anything about the Bosch DIY PSS 200 A. Answers come from this manual, with the pages they are based on.

PSS 200 A Maintenance Schedule

Before each use
Check moving parts and condition

Inspect for proper function, binding, broken or damaged parts. Repair before use.

After every use
Clean dust box and filter

Empty dust box and clean filter element slats with a soft brush to prevent clogging.

As needed
Clean ventilation slots

Keep machine and ventilation slots clean to ensure safe and proper operation.

When sanding sheet is worn
Replace sanding sheet

Remove debris from plate and replace sheet to maintain performance and reduce wear.

Show in the manual (page 12)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend PSS 200 A?

Yes No
0
User Pic

juul26

8 months ago

Does this sanding solution create dust inside the house when I sand a dining table or staircase steps?

0
User Pic

Manual.ly

8 months ago

Reviews indicate it produces little to no visible dust indoors. For example, it has been used for sanding an entire dining table and staircase treads with no dust settling in the room. To get the best result, make sure the dust extraction/collection setup is properly connected and that all connections are sealed. Using the correct sanding attachments and running at an appropriate speed also helps reduce airborne particles. If you are sanding heavily or for long periods, periodically check and empty/replace the dust container or bag to maintain suction performance.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

The PSS 200 A is intended for dry sanding of wood, plastics, filler compounds and painted or lacquered surfaces. It is not designed for wet sanding or for continuous heavy industrial use.

Is this answer helpful?

A

The sander has an integrated dust box with a microfilter for basic extraction. For better dust control, mount a vacuum hose to the extraction outlet and connect to a suitable vacuum cleaner; use a special vacuum for carcinogenic or very fine dusts.

Is this answer helpful?

A

The PSS 200 A accepts sanding sheets sized typically 93 x 185 mm or 93 x 230 mm depending on the model. The sanding plate supports Velcro (hook-and-loop) backed sheets for quick attachment; other variants use clamp-style attachment—follow the manual for correct mounting.

Is this answer helpful?

A

Wear eye protection, hearing protection (sound pressure about 82 dB(A)), and a P2-class respirator when sanding materials that generate harmful dust. Maintain good ventilation and avoid sanding hazardous materials without appropriate extraction and PPE.

Is this answer helpful?

A

Use coarse grits (40–60) for aggressive material removal, medium grits (80–120) for leveling and intermediate sanding, and fine grits (180–320) for finishing and preparing primers before coating. Test on a scrap piece to confirm desired results.

Is this answer helpful?

A

Always unplug before maintenance. Empty and clean the dust box and gently brush the filter element regularly. Keep ventilation slots clean, replace worn sanding sheets, and use only original Bosch accessories. For repairs use authorized Bosch service centers.

Is this answer helpful?

A

Typical sound pressure is ~82 dB(A) and vibration total value ah is ~5.5 m/s². These levels warrant hearing protection and consideration of vibration exposure for prolonged use; organize work and rest periods to reduce cumulative vibration.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Lightweight (≈1.6 kg) and ergonomic insulated handle for comfortable DIY use
  • Velcro-compatible sanding plate allows fast, tool-free paper changes
  • Integrated microfilter dust box plus external vacuum hookup for improved dust control
  • Wide grit range supported (40–320) for coarse to fine sanding tasks
  • Clear safety and maintenance guidance, and access to Bosch service and parts
VS

Disadvantages

  • Designed for dry sanding only; not suitable for wet applications
  • Dust box is basic; may require external vacuum for heavy dust or hazardous materials
  • Not intended for heavy industrial workloads—best for DIY and light trades use
  • Noise (~82 dB(A)) and vibration (~5.5 m/s²) require PPE for extended use
  • Some sanding-sheet sizes and hole patterns must be matched carefully for good extraction
M: OA-GPT-5-NAN

Product Specification

Type

Orbital sander

Power

200W (230V)

No-load speed

12000/​min

No-load stroke rate

24000/​min

Oscillation orbit

0.08 in

Sanding surface

7.17x3.62 in (LxW)

Sanding paper size

7.28x3.66 in (Hook and loop)

Tool attachment

Hook and loop fastening

Features

Softgrip, Dust extraction

Weight

3.53lb

Included in delivery

Case, Dust collection box

M: OA-GPT-54-NAN

Product Description

Bosch DIY PSS 200 A Electric Orbital Sander incl. case Manual

The Bosch DIY PSS 200 A Electric Orbital Sander is a compact, user-friendly sander designed for dry sanding of wood, plastics, fillers and painted surfaces. Lightweight and well balanced at around 1.6 kg, it delivers consistent orbital motion (2.0 mm orbit) and a no-load speed suitable for general DIY tasks. Its Velcro-compatible sanding plate accepts standard 93 x 185 or 93 x 230 mm sheets and allows quick paper changes. The integrated dust box with a microfilter system provides basic dust collection, and the machine can also be connected to an external vacuum via the extraction outlet for improved cleanup.

Ergonomics and controls are straightforward: a single on/off switch and a secure insulated handle make operation comfortable for extended periods. The PSS 200 A focuses on ease of use — simple sanding-sheet attachment, clear guidance for selecting grits (from coarse 40 to fine 320), and practical maintenance notes like emptying the dust box and cleaning the filter element. Bosch emphasizes safety, recommending hearing protection (typical sound pressure 82 dB(A)), adherence to electrical safety guidelines, and using suitable dust extraction when sanding hazardous materials.

Performance-wise, the sander is intended for moderate DIY workloads rather than heavy industrial use. Proper technique—uniform pressure, correct grit selection, and replacing worn sheets—ensures efficient material removal and longer accessory life. The manual also highlights specific cautions: avoid overheating workpieces, empty the dust collector before breaks to reduce fire risk, and avoid using sheets contaminated with metal on other materials.

The PSS 200 A integrates with Bosch’s accessory program, and users are advised to use original Bosch sanding sheets and replacement parts. For repairs and spare parts, Bosch recommends authorized service centers and provides contact and disposal guidance, including environmental recycling notes for end-of-life equipment.

Notes:

  • Intended for dry sanding only; do not expose to water.
  • Typical noise/vibration values: sound pressure ~82 dB(A); vibration ah ~5.5 m/s² — use hearing protection and consider vibration exposure.
  • Use appropriate dust extraction and a P2 respirator when working with hazardous or carcinogenic dusts.
  • Match sanding-sheet holes to the plate holes for optimal dust extraction.
  • Follow local regulations for disposal and recycling.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly