Manual.ly Logo

Bosch DIY PSS 200 A Manual

5.0 · 1 Ratings

PDF manual · 65 Pages

English

M: OA-GPT-5-NAN
page

/ 65

Loading...
6cb373d2c912349ade6db753cdedeb1a3a74 page c
12 | English
1 609 92A 1XL | (15.6.16) Bosch Power Tools
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745,
EN 50581 according to the provisions of the directives
2011/65/EU, 2014/30/EU, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ETM9,
70538 Stuttgart, GERMANY
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
Assembly
Before any work on the machine itself, pull the mains
plug.
Replacing the Sanding Sheet
When attaching a new sanding sheet, remove any dust or de-
bris from the sanding plate 5 (e. g. with a brush).
To ensure optimum dust extraction, pay attention that the
punched holes in the sanding sheet match with the holes in
the sanding plate.
Sanding Sheets with Velcro Backing
(PSS 200 A/PSS 250 AE) (see figure A)
The sanding plate 5 is fitted with Velcro backing for quick and
easy fastening of sanding sheets with Velcro adhesion.
Before attaching the sanding sheet 6, free the Velcro backing
of the sanding plate 5 from any debris by tapping against it in
order to enable optimum adhesion.
Position the sanding sheet 6 flush alongside one edge of the
sanding plate 5, then lay the sanding sheet onto the sanding
plate and press firmly.
To remove the sanding sheet 6, grasp it at one of the tips and
pull it off from the sanding plate 5.
Sanding Sheets without Velcro Backing
(PSS 190 AC/PSS 200 AC/PSS 250 AE) (see figure B)
Lightly lift and unlatch the sanding-sheet clamp 4.
Guide the sanding sheet 6 under the opened rear sanding-
sheet clamp 4 to the stop and clamp the sanding sheet by re-
inserting the sanding-sheet clamp 4.
Fold the sanding sheet 6 firmly around the sanding plate.
Guide the other end of the sanding sheet 6 under the front
sanding-sheet clamp 4 and clamp the sanding sheet by rein-
serting the sanding-sheet clamp 4.
Sanding sheets without holes, e. g. from rolls or by the meter,
can be punctured with the perforating tool 11 for use with
dust extraction. For this, press the machine with the mounted
sanding sheet onto the perforating tool (see figure E).
To remove the sanding sheet 6, unlatch the sanding-sheet
clamp 4 and pull out the sanding sheet.
Selecting the Sanding Sheet
Depending on the material to be worked and the required rate
of material removal, different sanding sheets are available:
Dust/Chip Extraction
Prevent dust accumulation at the workplace. Dusts can
easily ignite.
Dusts from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful to
one’s health. Touching or breathing-in the dusts can cause
allergic reactions and/or lead to respiratory infections of
the user or bystanders.
Certain dusts, such as oak or beech dust, are considered
as carcinogenic, especially in connection with wood-treat-
ment additives (chromate, wood preservative). Materials
containing asbestos may only be worked by specialists.
– As far as possible, use a dust extraction system
suitable for the material.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Grain size
For the working of all
wooden materials
40—240
For coarse-sanding, e. g. of
rough, unplaned beams and
boards coarse 40, 60
For face sanding and planing
small irregularities medium 80, 100, 120
For finish and fine sanding of
hard woods fine 180, 240
For the working of
paint/enamel coats or
primers and fillers
40—320
For sanding off paint coarse 40, 60
For sanding primer medium 80, 100, 120
For final sanding of primers
before coating fine 180, 240, 320
OBJ_BUCH-60-006.book Page 12 Wednesday, June 15, 2016 4:07 PM

Chat with your Bosch DIY PSS 200 A manual using AI

Get instant AI answers from your Bosch DIY PSS 200 A manual

Ask anything about the Bosch DIY PSS 200 A. Answers come from this manual, with the pages they are based on.

PSS 200 A Maintenance Schedule

Before each use
Check moving parts and condition

Inspect for proper function, binding, broken or damaged parts. Repair before use.

After every use
Clean dust box and filter

Empty dust box and clean filter element slats with a soft brush to prevent clogging.

As needed
Clean ventilation slots

Keep machine and ventilation slots clean to ensure safe and proper operation.

When sanding sheet is worn
Replace sanding sheet

Remove debris from plate and replace sheet to maintain performance and reduce wear.

Show in the manual (page 12)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend PSS 200 A?

Yes No
0
User Pic

juul26

8 months ago

Does this sanding solution create dust inside the house when I sand a dining table or staircase steps?

0
User Pic

Manual.ly

8 months ago

Reviews indicate it produces little to no visible dust indoors. For example, it has been used for sanding an entire dining table and staircase treads with no dust settling in the room. To get the best result, make sure the dust extraction/collection setup is properly connected and that all connections are sealed. Using the correct sanding attachments and running at an appropriate speed also helps reduce airborne particles. If you are sanding heavily or for long periods, periodically check and empty/replace the dust container or bag to maintain suction performance.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

The PSS 200 A is intended for dry sanding of wood, plastics, filler compounds and painted or lacquered surfaces. It is not designed for wet sanding or for continuous heavy industrial use.

Is this answer helpful?

A

The sander has an integrated dust box with a microfilter for basic extraction. For better dust control, mount a vacuum hose to the extraction outlet and connect to a suitable vacuum cleaner; use a special vacuum for carcinogenic or very fine dusts.

Is this answer helpful?

A

The PSS 200 A accepts sanding sheets sized typically 93 x 185 mm or 93 x 230 mm depending on the model. The sanding plate supports Velcro (hook-and-loop) backed sheets for quick attachment; other variants use clamp-style attachment—follow the manual for correct mounting.

Is this answer helpful?

A

Wear eye protection, hearing protection (sound pressure about 82 dB(A)), and a P2-class respirator when sanding materials that generate harmful dust. Maintain good ventilation and avoid sanding hazardous materials without appropriate extraction and PPE.

Is this answer helpful?

A

Use coarse grits (40–60) for aggressive material removal, medium grits (80–120) for leveling and intermediate sanding, and fine grits (180–320) for finishing and preparing primers before coating. Test on a scrap piece to confirm desired results.

Is this answer helpful?

A

Always unplug before maintenance. Empty and clean the dust box and gently brush the filter element regularly. Keep ventilation slots clean, replace worn sanding sheets, and use only original Bosch accessories. For repairs use authorized Bosch service centers.

Is this answer helpful?

A

Typical sound pressure is ~82 dB(A) and vibration total value ah is ~5.5 m/s². These levels warrant hearing protection and consideration of vibration exposure for prolonged use; organize work and rest periods to reduce cumulative vibration.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Lightweight (≈1.6 kg) and ergonomic insulated handle for comfortable DIY use
  • Velcro-compatible sanding plate allows fast, tool-free paper changes
  • Integrated microfilter dust box plus external vacuum hookup for improved dust control
  • Wide grit range supported (40–320) for coarse to fine sanding tasks
  • Clear safety and maintenance guidance, and access to Bosch service and parts
VS

Disadvantages

  • Designed for dry sanding only; not suitable for wet applications
  • Dust box is basic; may require external vacuum for heavy dust or hazardous materials
  • Not intended for heavy industrial workloads—best for DIY and light trades use
  • Noise (~82 dB(A)) and vibration (~5.5 m/s²) require PPE for extended use
  • Some sanding-sheet sizes and hole patterns must be matched carefully for good extraction
M: OA-GPT-5-NAN

Product Specification

Type

Orbital sander

Power

200W (230V)

No-load speed

12000/​min

No-load stroke rate

24000/​min

Oscillation orbit

0.08 in

Sanding surface

7.17x3.62 in (LxW)

Sanding paper size

7.28x3.66 in (Hook and loop)

Tool attachment

Hook and loop fastening

Features

Softgrip, Dust extraction

Weight

3.53lb

Included in delivery

Case, Dust collection box

M: OA-GPT-54-NAN

Product Description

Bosch DIY PSS 200 A Electric Orbital Sander incl. case Manual

The Bosch DIY PSS 200 A Electric Orbital Sander is a compact, user-friendly sander designed for dry sanding of wood, plastics, fillers and painted surfaces. Lightweight and well balanced at around 1.6 kg, it delivers consistent orbital motion (2.0 mm orbit) and a no-load speed suitable for general DIY tasks. Its Velcro-compatible sanding plate accepts standard 93 x 185 or 93 x 230 mm sheets and allows quick paper changes. The integrated dust box with a microfilter system provides basic dust collection, and the machine can also be connected to an external vacuum via the extraction outlet for improved cleanup.

Ergonomics and controls are straightforward: a single on/off switch and a secure insulated handle make operation comfortable for extended periods. The PSS 200 A focuses on ease of use — simple sanding-sheet attachment, clear guidance for selecting grits (from coarse 40 to fine 320), and practical maintenance notes like emptying the dust box and cleaning the filter element. Bosch emphasizes safety, recommending hearing protection (typical sound pressure 82 dB(A)), adherence to electrical safety guidelines, and using suitable dust extraction when sanding hazardous materials.

Performance-wise, the sander is intended for moderate DIY workloads rather than heavy industrial use. Proper technique—uniform pressure, correct grit selection, and replacing worn sheets—ensures efficient material removal and longer accessory life. The manual also highlights specific cautions: avoid overheating workpieces, empty the dust collector before breaks to reduce fire risk, and avoid using sheets contaminated with metal on other materials.

The PSS 200 A integrates with Bosch’s accessory program, and users are advised to use original Bosch sanding sheets and replacement parts. For repairs and spare parts, Bosch recommends authorized service centers and provides contact and disposal guidance, including environmental recycling notes for end-of-life equipment.

Notes:

  • Intended for dry sanding only; do not expose to water.
  • Typical noise/vibration values: sound pressure ~82 dB(A); vibration ah ~5.5 m/s² — use hearing protection and consider vibration exposure.
  • Use appropriate dust extraction and a P2 respirator when working with hazardous or carcinogenic dusts.
  • Match sanding-sheet holes to the plate holes for optimal dust extraction.
  • Follow local regulations for disposal and recycling.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly