Manual.ly Logo

Bosch DIY PKS 16 Multi Manual

4.3 · 11 Ratings

PDF manual · 118 Pages

English

M: OA-GPT-54-NAN
page

/ 118

Loading...
d0a1aeafd3ac5531b5837d4ca3340f2c6da0 page 10
16 | English
1 609 92A 216 | (16.6.16) Bosch Power Tools
Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Circular Saws
Cutting procedures
DANGER: Keep hands away from cutting area and the
blade. Keep your second hand on auxiliary handle, or
motor housing. If both hands are holding the saw, they
cannot be cut by the blade.
Do not reach underneath the workpiece. The guard can-
not protect you from the blade below the workpiece.
Adjust the cutting depth to the thickness of the work-
piece. Less than a full tooth of the blade teeth should be
visible below the workpiece.
Never hold piece being cut in your hands or across your
leg. Secure the workpiece to a stable platform. It is im-
portant to support the work properly to minimize body ex-
posure, blade binding, or loss of control.
Hold the power tool by insulated gripping surfaces on-
ly, when performing an operation where the cutting
tool may contact hidden wiring or its own cord. Contact
with a “live” wire will also make exposed metal parts of the
power tool “live” and could give the operator an electric
shock.
When ripping, always use a rip fence or straight edge
guide. This improves the accuracy of cut and reduces the
chance of blade binding.
Always use blades with correct size and shape (dia-
mond versus round) of arbour holes. Blades that do not
match the mounting hardware of the saw will run eccentri-
cally, causing loss of control.
Never use damaged or incorrect blade washers or bolt.
The blade washers and bolt were specially designed for your
saw, for optimum performance and safety of operation.
Kickback causes and related warnings
– Kickback is a sudden reaction to a pinched, bound or
misaligned saw blade, causing an uncontrolled saw to lift
up and out of the workpiece toward the operator;
– When the blade is pinched or bound tightly by the kerf
closing down, the blade stalls and the motor reaction
drives the unit rapidly back toward the operator;
– If the blade becomes twisted or misaligned in the cut,
the teeth at the back edge of the blade can dig into the top
surface of the wood causing the blade to climb out of the
kerf and jump back toward the operator.
Kickback is the result of saw misuse and/or incorrect oper-
ating procedures or conditions and can be avoided by tak-
ing proper precautions as given below.
Maintain a firm grip with both hands on the saw and po-
sition your arms to resist kickback forces. Position
your body to either side of the blade, but not in line with
the blade. Kickback could cause the saw to jump back-
wards, but kickback forces can be controlled by the opera-
tor, if proper precautions are taken.
When blade is binding, or when interrupting a cut for
any reason, release the trigger and hold the saw mo-
tionless in the material until the blade comes to a com-
plete stop. Never attempt to remove the saw from the
work or pull the saw backward while the blade is in mo-
tion or kickback may occur. Investigate and take correc-
tive actions to eliminate the cause of blade binding.
When restarting a saw in the workpiece, centre the saw
blade in the kerf and check that saw teeth are not en-
gaged into the material. If saw blade is binding, it may
walk up or kickback from the workpiece as the saw is re-
started.
Support large panels to minimise the risk of blade
pinching and kickback. Large panels tend to sag under
their own weight. Supports must be placed under the pan-
el on both sides, near the line of cut and near the edge of
the panel.
Do not use dull or damaged blades. Unsharpened or im-
properly set blades produce narrow kerf causing excessive
friction, blade binding and kickback.
Blade depth and bevel adjusting locking levers must be
tight and secure before making cut. If blade adjustment
shifts while cutting, it may cause binding and kickback.
Use extra caution when sawing into existing walls or
other blind areas. The protruding blade may cut objects
that can cause kickback.
Guard function
Check guard for proper closing before each use. Do not
operate the saw if guard does not move freely and en-
close the blade instantly. Never clamp or tie the guard
so that the blade is exposed. If saw is accidentally
dropped, guard may be bent. Check to make sure that
guard moves freely and does not touch the blade or any
other part, in all angles and depths of cut.
Check the operation and condition of the guard return
spring. If the guard and the spring are not operating
properly, they must be serviced before use. Guard may
operate sluggishly due to damaged parts, gummy depos-
its, or a build-up of debris.
Assure that the base plate of the saw will not shift while
performing the “plunge cut” when the blade bevel set-
ting is not at 90°. Blade shifting sideways will cause bind-
ing and likely kick back.
Always observe that the guard is covering the blade be-
fore placing saw down on bench or floor. An unprotect-
ed, coasting blade will cause the saw to walk backwards,
cutting whatever is in its path. Be aware of the time it takes
for the blade to stop after switch is released.
OBJ_BUCH-1837-005.book Page 16 Thursday, June 16, 2016 11:13 AM

Chat with your Bosch DIY PKS 16 Multi manual using AI

Get instant AI answers from your Bosch DIY PKS 16 Multi manual

Ask anything about the Bosch DIY PKS 16 Multi. Answers come from this manual, with the pages they are based on.

PKS 16 Multi Maintenance Schedule

Before each use
Check guard function

Verify the blade guard closes properly and moves freely. Do not operate if it does not close instantly or is stuck.

Show in the manual (page 16)
Before each use
Check guard spring

Inspect the guard return spring condition and operation. Service if the guard operates sluggishly due to debris or damage.

Show in the manual (page 16)
After every use
Clean ventilation slots

Keep machine and air vents clean by removing dust and chips with a brush or compressed air to prevent electrical hazards.

Show in the manual (page 22)
After every use
Clean saw blade and parts

Remove resin and glue residue from the blade immediately after use. Clean all clamping parts and the protective cover after finishing work.

Show in the manual (page 22)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend PKS 16 Multi?

Yes No
0
User Pic

Lea Zimmermann

8 months ago

Does the Bosch PKS16 Multi have a clear marking/indicator to see exactly where the cut starts and ends? I often need precise cut lines when trimming boards or tiles.

0
User Pic

Manual.ly

8 months ago

The PKS16 Multi does not provide a highly visible, full-length scale for the exact start and end of the cut. In practice, the most reliable method is to mark the cut line on your workpiece (pencil/tape) and align the saw base and blade to that line before cutting. If you need better guidance, you can also use a straight edge/guide and measure your required cut length to set the start position. Several users also note that visibility of the cut end can be limited, especially when trying to stop at a specific point.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is designed for wood, thin non-ferrous metals, plastics, and tiles when fitted with the correct diamond cutting disc. Ferrous metals are not permitted.

Is this answer helpful?

A

Yes, but only with an approved diamond cutting disc. The manual specifies dry cutting with dust extraction, so it is important to use the right setup.

Is this answer helpful?

A

The tool has a 400 W rated power input. That makes it a compact DIY saw suited to lighter household cutting jobs rather than heavy construction work.

Is this answer helpful?

A

Yes, the product is described as including a case, which makes storage and transport more convenient for home users and occasional workshop tasks.

Is this answer helpful?

A

Yes, the cutting depth is adjustable. This helps match the cut to the thickness of the material and improves safety and control during operation.

Is this answer helpful?

A

Yes. Dust extraction is strongly recommended for wood, plastic, and especially stone materials. It helps keep the workspace cleaner and reduces health risks.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Compact and lightweight, making it easy to control during DIY cutting tasks.
  • Works with wood, plastics, thin non-ferrous metals, and tiles using the right blade.
  • Adjustable cutting depth supports cleaner, more accurate results.
  • Includes a case for easier storage and transport.
  • Cut line viewing support helps improve guidance along marked cuts.
VS

Disadvantages

  • Not intended for ferrous metals, so its material range is limited.
  • 400 W output is best for light to medium DIY work, not demanding site tasks.
  • Blade changes and setup require care to follow the manual correctly.
  • Tile cutting is limited to dry cutting with dust extraction.
M: OA-GPT-54-NAN

Product Specification

Type

Circular Saw

Power

400W

No-load Speed

6400/min

Saw Blade Diameter

2.56 in

Cutting Capacity

0.63 in (cutting depth at 0°)

Tool Holder

Bore 0.59 in, Spindle Lock

Features

Softgrip, Dust Extraction

Weight

4.19 lb

Scope of Delivery

Case, 3-piece accessory set

M: OA-GPT-54-NAN

Product Description

Bosch DIY PKS 16 Multi electric circular saw incl. case Manual

The Bosch DIY PKS 16 Multi is a compact circular saw designed for home projects that need clean, controlled cuts without the bulk of a full-size machine. Its 400 W motor and lightweight 1.9 kg build make it easy to handle, especially when working on shelves, panels, trim, or tile repair tasks around the house. Supplied with a case, it is a practical choice for users who want a portable saw that stores neatly and travels well between jobs.

One of the most appealing points is its versatility. With the right blade, the saw can handle wood, thin non-ferrous metals, and plastics, while a diamond cutting disc opens the door to dry tile cutting. That flexibility means one tool can support several common DIY projects. The adjustable cutting depth also helps improve accuracy, allowing you to match the cut more closely to the material thickness and reduce waste.

Bosch has clearly focused on ease of control. The viewing window for the cut line, combined with the compact base plate, helps guide the tool along a marked path. For straight cuts, an auxiliary stop can improve precision even further. The plunge-style operation adds another layer of convenience, making it easier to start cuts in a controlled way when the task calls for it.

Safety and maintenance are also central to the design. The guard is built to close automatically, and the tool includes a lock-off button to reduce accidental starts. Dust extraction support is especially useful when cutting wood, plastic, or stone materials, since it helps keep the workspace cleaner and visibility better. The manual also stresses the importance of using the correct blade type, keeping the saw clean, and working with proper workpiece support.

For DIY users who want a small but capable saw, the Bosch DIY PKS 16 Multi electric circular saw incl. case Manual highlights a tool that balances portability, precision, and multi-material performance. It is not a heavy-duty site saw, but for careful home use it offers a thoughtful mix of functionality and convenience.

Notes

  • Best suited for straight cuts in wood, plastics, and thin non-ferrous metals.
  • Diamond discs are intended for dry tile cutting only.
  • Use dust extraction whenever possible for cleaner and safer work.
  • Ferrous metal cutting is not permitted.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly