Manual.ly Logo

Bosch DIY PKS 16 Multi Manual

4.3 · 11 Ratings

PDF manual · 118 Pages

English

M: OA-GPT-54-NAN
page

/ 118

Loading...
d0a1aeafd3ac5531b5837d4ca3340f2c6da0 page f
English | 15
Bosch Power Tools 1 609 92A 216 | (16.6.16)
Nur für EU-Länder:
Gemäß der Europäischen Richtlinie
2012/19/EU über Elektro- und Elektronik-
Altgeräte und ihrer Umsetzung in nationales
Recht müssen nicht mehr gebrauchsfähige
Elektrowerkzeuge getrennt gesammelt und
einer umweltgerechten Wiederverwertung
zugeführt werden.
Änderungen vorbehalten.
English
Safety Notes
General Power Tool Safety Warnings
Read all safety warnings and all in-
structions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or seri-
ous injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool. Car-
rying power tools with your finger on the switch or energis-
ing power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
WARNING
OBJ_BUCH-1837-005.book Page 15 Thursday, June 16, 2016 11:13 AM

Chat with your Bosch DIY PKS 16 Multi manual using AI

Get instant AI answers from your Bosch DIY PKS 16 Multi manual

Ask anything about the Bosch DIY PKS 16 Multi. Answers come from this manual, with the pages they are based on.

PKS 16 Multi Maintenance Schedule

Before each use
Check guard function

Verify the blade guard closes properly and moves freely. Do not operate if it does not close instantly or is stuck.

Show in the manual (page 16)
Before each use
Check guard spring

Inspect the guard return spring condition and operation. Service if the guard operates sluggishly due to debris or damage.

Show in the manual (page 16)
After every use
Clean ventilation slots

Keep machine and air vents clean by removing dust and chips with a brush or compressed air to prevent electrical hazards.

Show in the manual (page 22)
After every use
Clean saw blade and parts

Remove resin and glue residue from the blade immediately after use. Clean all clamping parts and the protective cover after finishing work.

Show in the manual (page 22)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend PKS 16 Multi?

Yes No
0
User Pic

Lea Zimmermann

8 months ago

Does the Bosch PKS16 Multi have a clear marking/indicator to see exactly where the cut starts and ends? I often need precise cut lines when trimming boards or tiles.

0
User Pic

Manual.ly

8 months ago

The PKS16 Multi does not provide a highly visible, full-length scale for the exact start and end of the cut. In practice, the most reliable method is to mark the cut line on your workpiece (pencil/tape) and align the saw base and blade to that line before cutting. If you need better guidance, you can also use a straight edge/guide and measure your required cut length to set the start position. Several users also note that visibility of the cut end can be limited, especially when trying to stop at a specific point.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is designed for wood, thin non-ferrous metals, plastics, and tiles when fitted with the correct diamond cutting disc. Ferrous metals are not permitted.

Is this answer helpful?

A

Yes, but only with an approved diamond cutting disc. The manual specifies dry cutting with dust extraction, so it is important to use the right setup.

Is this answer helpful?

A

The tool has a 400 W rated power input. That makes it a compact DIY saw suited to lighter household cutting jobs rather than heavy construction work.

Is this answer helpful?

A

Yes, the product is described as including a case, which makes storage and transport more convenient for home users and occasional workshop tasks.

Is this answer helpful?

A

Yes, the cutting depth is adjustable. This helps match the cut to the thickness of the material and improves safety and control during operation.

Is this answer helpful?

A

Yes. Dust extraction is strongly recommended for wood, plastic, and especially stone materials. It helps keep the workspace cleaner and reduces health risks.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Compact and lightweight, making it easy to control during DIY cutting tasks.
  • Works with wood, plastics, thin non-ferrous metals, and tiles using the right blade.
  • Adjustable cutting depth supports cleaner, more accurate results.
  • Includes a case for easier storage and transport.
  • Cut line viewing support helps improve guidance along marked cuts.
VS

Disadvantages

  • Not intended for ferrous metals, so its material range is limited.
  • 400 W output is best for light to medium DIY work, not demanding site tasks.
  • Blade changes and setup require care to follow the manual correctly.
  • Tile cutting is limited to dry cutting with dust extraction.
M: OA-GPT-54-NAN

Product Specification

Type

Circular Saw

Power

400W

No-load Speed

6400/min

Saw Blade Diameter

2.56 in

Cutting Capacity

0.63 in (cutting depth at 0°)

Tool Holder

Bore 0.59 in, Spindle Lock

Features

Softgrip, Dust Extraction

Weight

4.19 lb

Scope of Delivery

Case, 3-piece accessory set

M: OA-GPT-54-NAN

Product Description

Bosch DIY PKS 16 Multi electric circular saw incl. case Manual

The Bosch DIY PKS 16 Multi is a compact circular saw designed for home projects that need clean, controlled cuts without the bulk of a full-size machine. Its 400 W motor and lightweight 1.9 kg build make it easy to handle, especially when working on shelves, panels, trim, or tile repair tasks around the house. Supplied with a case, it is a practical choice for users who want a portable saw that stores neatly and travels well between jobs.

One of the most appealing points is its versatility. With the right blade, the saw can handle wood, thin non-ferrous metals, and plastics, while a diamond cutting disc opens the door to dry tile cutting. That flexibility means one tool can support several common DIY projects. The adjustable cutting depth also helps improve accuracy, allowing you to match the cut more closely to the material thickness and reduce waste.

Bosch has clearly focused on ease of control. The viewing window for the cut line, combined with the compact base plate, helps guide the tool along a marked path. For straight cuts, an auxiliary stop can improve precision even further. The plunge-style operation adds another layer of convenience, making it easier to start cuts in a controlled way when the task calls for it.

Safety and maintenance are also central to the design. The guard is built to close automatically, and the tool includes a lock-off button to reduce accidental starts. Dust extraction support is especially useful when cutting wood, plastic, or stone materials, since it helps keep the workspace cleaner and visibility better. The manual also stresses the importance of using the correct blade type, keeping the saw clean, and working with proper workpiece support.

For DIY users who want a small but capable saw, the Bosch DIY PKS 16 Multi electric circular saw incl. case Manual highlights a tool that balances portability, precision, and multi-material performance. It is not a heavy-duty site saw, but for careful home use it offers a thoughtful mix of functionality and convenience.

Notes

  • Best suited for straight cuts in wood, plastics, and thin non-ferrous metals.
  • Diamond discs are intended for dry tile cutting only.
  • Use dust extraction whenever possible for cleaner and safer work.
  • Ferrous metal cutting is not permitted.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly