Manual.ly Logo

Bosch DIY EasyImpact 600 Manual

0.0 · 0 Ratings

PDF manual · 77 Pages

English

M: OA-GPT-5-NAN
page

/ 77

Loading...
d3fb6ffd1f5c6760528d6d0e0979e43de6a3 page 9
Deutsch | 9
Betriebsart einstellen
Bohren und Schrauben
Stellen Sie den Umschalter (4) auf das Symbol
„Bohren“.
Schlagbohren
Stellen Sie den Umschalter (4) auf das Symbol
„Schlagbohren“.
Der Umschalter (4) rastet spürbar ein und kann auch bei lau-
fendem Motor betätigt werden.
Ein-/Ausschalten
Drücken Sie zur Inbetriebnahme des Elektrowerkzeuges
den Ein-/Ausschalter (6) und halten Sie ihn gedrückt.
Zum Feststellen des gedrückten Ein-/Ausschalters (6)
drücken Sie die Feststelltaste (5).
Um das Elektrowerkzeug auszuschalten, lassen Sie den
Ein-/Ausschalter (6) los bzw. wenn er mit der Feststelltaste
(5) arretiert ist, drücken Sie den Ein-/Ausschalter (6) kurz
und lassen ihn dann los.
Drehzahl/Schlagzahl einstellen
Sie können die Drehzahl/Schlagzahl des eingeschalteten
Elektrowerkzeugs stufenlos regulieren, je nachdem, wie weit
Sie den Ein-/Ausschalter (6) eindrücken.
Leichter Druck auf den Ein-/Ausschalter (6) bewirkt eine
niedrige Drehzahl/Schlagzahl. Mit zunehmendem Druck er-
höht sich die Drehzahl/Schlagzahl.
Arbeitshinweise
u Ziehen Sie vor allen Arbeiten am Elektrowerkzeug den
Netzstecker aus der Steckdose.
u Setzen Sie das Elektrowerkzeug nur ausgeschaltet auf
die Mutter/Schraube auf. Sich drehende Einsatzwerk-
zeuge können abrutschen.
Nach längerem Arbeiten mit kleiner Drehzahl sollten Sie das
Elektrowerkzeug zur Abkühlung ca. 3 Minuten lang bei maxi-
maler Drehzahl im Leerlauf drehen lassen.
Um Fliesen zu bohren, stellen Sie den Umschalter (4) auf
das Symbol „Bohren“. Nach dem Durchbohren der Fliese
stellen Sie den Umschalter auf das Symbol „Schlagbohren“
um und arbeiten mit Schlag.
Bei Arbeiten in Beton, Gestein und Mauerwerk verwenden
Sie Hartmetallbohrer.
Verwenden Sie beim Bohren in Metall nur einwandfreie, ge-
schärfte HSS-Bohrer (HSS=Hochleistungs-Schnellschnitt-
stahl). Entsprechende Qualität garantiert das Bosch-Zube-
hör-Programm.
Mit dem Bohrerschärfgerät (Zubehör) können Sie Spiralboh-
rer mit einem Durchmesser von 2,5–10 mm mühelos schär-
fen.
Wartung und Service
Wartung und Reinigung
u Ziehen Sie vor allen Arbeiten am Elektrowerkzeug den
Netzstecker aus der Steckdose.
u Halten Sie das Elektrowerkzeug und die Lüftungs-
schlitze sauber, um gut und sicher zu arbeiten.
Wenn ein Ersatz der Anschlussleitung erforderlich ist, dann
ist dies von Bosch oder einer autorisierten Kundendienst-
stelle für Bosch-Elektrowerkzeuge auszuführen, um Sicher-
heitsgefährdungen zu vermeiden.
Kundendienst und Anwendungsberatung
Der Kundendienst beantwortet Ihre Fragen zu Reparatur und
Wartung Ihres Produkts sowie zu Ersatzteilen. Explosions-
zeichnungen und Informationen zu Ersatzteilen finden Sie
auch unter: www.bosch-pt.com
Das Bosch-Anwendungsberatungs-Team hilft Ihnen gerne
bei Fragen zu unseren Produkten und deren Zubehör.
Geben Sie bei allen Rückfragen und Ersatzteilbestellungen
bitte unbedingt die 10-stellige Sachnummer laut Typen-
schild des Produkts an.
Deutschland
Robert Bosch Power Tools GmbH
Servicezentrum Elektrowerkzeuge
Zur Luhne 2
37589 Kalefeld – Willershausen
Kundendienst: Tel.: (0711) 40040480
Unter www.bosch-pt.de können Sie online Ersatzteile be-
stellen oder Reparaturen anmelden.
Anwendungsberatung:
Tel.: (0711) 40040480
Fax: (0711) 40040482
Weitere Serviceadressen finden Sie unter:
www.bosch-pt.com/serviceaddresses
Entsorgung
Elektrowerkzeuge, Zubehör und Verpackungen sollen einer
umweltgerechten Wiederverwertung zugeführt werden.
Werfen Sie Elektrowerkzeuge nicht in den
Hausmüll!
Nur für EU-Länder:
Gemaß der Europaischen Richtlinie 2012/19/EU uber Elek-
tro- und Elektronik-Altgerate und ihrer Umsetzung in natio-
nales Recht mussen nicht mehr gebrauchsfahige Elektro-
werkzeuge getrennt gesammelt und einer umweltgerechten
Wiederverwertung zugefuhrt werden.
Bosch Power Tools 1 609 92A 5Y4 | (26.11.2020)

Chat with your Bosch DIY EasyImpact 600 manual using AI

Get instant AI answers from your Bosch DIY EasyImpact 600 manual

Ask anything about the Bosch DIY EasyImpact 600. Answers come from this manual, with the pages they are based on.

EasyImpact 600 Maintenance Schedule

Before each use
Check moving parts and damage

Inspect moving parts for proper function and check for broken or damaged parts that may affect operation. Repair before use.

Before each use
Keep cutting tools sharp and clean

Maintain cutting tools with sharp edges to prevent binding and ensure easier control.

Before each use
Clean handles and grip surfaces

Keep handles dry, clean, and free from oil and grease to ensure safe handling and control.

As needed
Clean tool and ventilation slots

Keep the power tool and ventilation slots clean to ensure safe and efficient operation.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend EasyImpact 600?

Yes No

Frequently Asked Questions

A

The EasyImpact 600 is designed for impact drilling in brick, concrete and stone and for drilling in wood, metal, ceramic and plastic. Models with electronic control and reversible rotation are also suitable for screwdriving and thread cutting.

Is this answer helpful?

A

Key specs: 600 W rated input, 300 W max output, no-load speed 0–3,000 rpm, impact rate up to 45,000 bpm, rated torque 1.4 Nm, chuck capacity 2–13 mm, max drilling diameters: concrete 12 mm, steel 10 mm, wood 25 mm, weight 1.7 kg.

Is this answer helpful?

A

Always wear eye protection and, for impact drilling, hearing protection. Use a dust mask (P2) when generating hazardous dust, protective gloves for tool changes, and ensure good ventilation or dust extraction to reduce inhalation risk.

Is this answer helpful?

A

Use the selector switch labeled “Drilling/Impact Drilling.” The switch clicks into place and can be changed even while the motor is running; set it to the drilling symbol for screwdriving to avoid impact action.

Is this answer helpful?

A

Keep the tool and ventilation slots clean, inspect accessories for damage, and have the power cable or internal repairs performed only by Bosch or an authorized service center. Use original spare parts to ensure safety and performance.

Is this answer helpful?

A

Use carbide-tipped masonry bits for concrete and brick, sharpened HSS twist drills for metal, and appropriate wood bits for timber. Use a universal bit holder for screwdriver bits and match bit type to the screw head.

Is this answer helpful?

A

Yes. Typical sound pressure level is about 91 dB(A) and vibration values are 3 m/s² for metal drilling and 16.5 m/s² for impact drilling in concrete. Wear hearing protection and plan work/rest cycles to reduce vibration exposure.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact and lightweight (1.7 kg) for comfortable DIY use and easy handling.
  • Variable speed (0–3,000 rpm) and impact mode (up to 45,000 bpm) for versatile drilling.
  • Keyless 2–13 mm chuck and reversible rotation for quick tool changes and screwdriving.
  • Auxiliary handle with 12 positions and depth stop for stable, controlled drilling.
  • Measured noise and vibration data provided to guide PPE and safe operation.
VS

Disadvantages

  • Moderate rated torque (1.4 Nm) may limit heavy-duty fastening tasks.
  • Noise level (~91 dB(A)) requires mandatory hearing protection for impact drilling.
  • Impact drilling vibration (16.5 m/s²) can be high during prolonged use.
  • Wired design limits mobility compared with cordless alternatives.
  • Replacement of power cable must be done by authorized service, adding potential cost.
M: OA-GPT-5-NAN

Product Specification

Type

Impact Drill

Power

600W

No-load Speed

0-3,000/min

No-load Impact Rate

0-45,000/min

Drilling Capacity

Wood 0.98 in, Steel 0.39 in, Concrete 0.47 in

Torque

12.39 in-lb

Chuck Type

0.08-0.51 in Keyless Chuck, Spindle Lock

Features

Right/Left Rotation, Speed Control, Impact Rate Control, Impact Stop, Soft Grip, Auxiliary Handle, Depth Stop

Weight

3.75 lb

M: OA-GPT-54-NAN

Product Description

Bosch DIY EasyImpact 600 Electric Impact Drill Manual

The Bosch DIY EasyImpact 600 Electric Impact Drill is a compact, versatile corded impact drill engineered for homeowners and DIY enthusiasts. With a 600 W rated input and a maximum output of 300 W, this lightweight drill (1.7 kg) balances power and maneuverability for tasks across masonry, wood, and metal. It offers a keyless 2–13 mm chuck, variable speed (0–3,000 rpm), and impact mode (up to 45,000 bpm), making it suitable for drilling in concrete, brick and stone as well as precise drilling and screwdriving in wood, metal, ceramic and plastic.

Key features and usage

Equipped with reversible rotation, an auxiliary handle adjustable to 12 positions and a depth stop, the EasyImpact 600 supports secure, fatigue-reducing operation. The drill’s selector switch lets you change between drilling and hammer-drilling on the fly, and the trigger provides stepless speed control. A lock-on button enables continuous operation, while insulated gripping surfaces improve safety when working near concealed wiring. For screwdriving, use the universal bit holder and matching bits.

The manual emphasizes correct tool selection, proper maintenance and safe handling: keep work areas clean and well lit, use hearing and eye protection when impact drilling, avoid using the drill in wet conditions and secure workpieces with clamps or a vice. For masonry work use carbide-tipped bits; for metal use sharp HSS bits. Replace worn accessories and service the tool through authorized Bosch centers.

Performance and specifications

Nominal power input: 600 W; max. power output: 300 W. No-load speed 0–3,000 rpm; impact rate up to 45,000 bpm. Maximum drilling diameters: concrete 12 mm, steel 10 mm, wood 25 mm. Rated torque 1.4 Nm. Noise level around 91 dB(A) (use hearing protection); vibration values specified for metal drilling (3 m/s2) and concrete impact drilling (16.5 m/s2). The drill is double-insulated (Protection Class II) and designed for 230 V mains (can operate at 220 V).

Practical tips

Start drilling at low speed with the bit tip contacting the workpiece to avoid bending. Do not exceed the drill bit’s max speed rating. After prolonged low-speed use, run the drill at max speed unloaded for a few minutes to cool. Use a P2-rated respirator when working with hazardous dusts and ensure proper dust extraction where possible.

Notes

  • Use the auxiliary handle for better control and to reduce reaction torque risks.
  • Replace the power cable only through Bosch service centers.
  • Dispose of the tool and accessories according to local e-waste regulations (WEEE).
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly