Manual.ly Logo

Bosch DIY EasyImpact 600 Manual

0.0 · 0 Ratings

PDF manual · 77 Pages

English

M: OA-GPT-5-NAN
page

/ 77

Loading...
d3fb6ffd1f5c6760528d6d0e0979e43de6a3 page 6
6 | Deutsch
Verwendung und Behandlung des Elektrowerkzeugs
u Überlasten Sie das Elektrowerkzeug nicht. Verwenden
Sie fu
r Ihre Arbeit das dafür bestimmte Elektrowerk-
zeug. Mit dem passenden Elektrowerkzeug arbeiten Sie
besser und sicherer im angegebenen Leistungsbereich.
u Benutzen Sie kein Elektrowerkzeug, dessen Schalter
defekt ist. Ein Elektrowerkzeug, das sich nicht mehr ein-
oder ausschalten lässt, ist gefährlich und muss repariert
werden.
u Ziehen Sie den Stecker aus der Steckdose und/oder
entfernen Sie einen abnehmbaren Akku, bevor Sie Ge-
räteeinstellungen vornehmen, Einsatzwerkzeugteile
wechseln oder das Elektrowerkzeug weglegen. Diese
Vorsichtsmaßnahme verhindert den unbeabsichtigten
Start des Elektrowerkzeuges.
u Bewahren Sie unbenutzte Elektrowerkzeuge außer-
halb der Reichweite von Kindern auf. Lassen Sie keine
Personen das Elektrowerkzeug benutzen, die mit die-
sem nicht vertraut sind oder diese Anweisungen nicht
gelesen haben. Elektrowerkzeuge sind gefährlich, wenn
sie von unerfahrenen Personen benutzt werden.
u Pflegen Sie Elektrowerkzeuge und Einsatzwerkzeug
mit Sorgfalt. Kontrollieren Sie, ob bewegliche Teile
einwandfrei funktionieren und nicht klemmen, ob Tei-
le gebrochen oder so beschädigt sind, dass die Funkti-
on des Elektrowerkzeuges beeinträchtigt ist. Lassen
Sie beschädigte Teile vor dem Einsatz des Gerätes re-
parieren. Viele Unfälle haben ihre Ursache in schlecht ge-
warteten Elektrowerkzeugen.
u Halten Sie Schneidwerkzeuge scharf und sauber.
Sorgfältig gepflegte Schneidwerkzeuge mit scharfen
Schneidkanten verklemmen sich weniger und sind leich-
ter zu führen.
u Verwenden Sie Elektrowerkzeug, Zubehör, Einsatz-
werkzeuge usw. entsprechend diesen Anweisungen.
Berücksichtigen Sie dabei die Arbeitsbedingungen
und die auszuführende Tätigkeit. Der Gebrauch von
Elektrowerkzeugen fur andere als die vorgesehenen An-
wendungen kann zu gefährlichen Situationen führen.
u Halten Sie Griffe und Griffflächen trocken, sauber und
frei von Öl und Fett. Rutschige Griffe und Griffflächen er-
lauben keine sichere Bedienung und Kontrolle des Elek-
trowerkzeugs in unvorhergesehenen Situationen.
Service
u Lassen Sie Ihr Elektrowerkzeug nur von qualifiziertem
Fachpersonal und nur mit Original-Ersatzteilen repa-
rieren. Damit wird sichergestellt, dass die Sicherheit des
Elektrowerkzeuges erhalten bleibt.
Sicherheitshinweise für Bohrmaschinen
Sicherheitshinweise für alle Arbeiten
u Tragen Sie Gehörschutz beim Schlagbohren. Die Ein-
wirkung von Lärm kann Gehörverlust bewirken.
u Benutzen Sie den Zusatzgriff. Der Verlust der Kontrolle
kann zu Verletzungen führen.
u Halten Sie das Elektrowerkzeug an den isolierten
Griffflächen, wenn Sie Arbeiten ausführen, bei denen
das Einsatzwerkzeug oder die Schrauben verborgene
Stromleitungen oder die eigene Anschlussleitung tref-
fen kann. Der Kontakt mit einer spannungsführenden Lei-
tung kann auch metallene Geräteteile unter Spannung
setzen und zu einem elektrischen Schlag führen.
Sicherheitshinweise bei Verwendung langer Bohrer
u Arbeiten Sie auf keinen Fall mit einer höheren Dreh-
zahl als der für den Bohrer maximal zulässigen Dreh-
zahl. Bei höheren Drehzahlen kann sich der Bohrer leicht
verbiegen, wenn er sich ohne Kontakt mit dem Werkstück
frei drehen kann, und zu Verletzungen führen.
u Beginnen Sie den Bohrvorgang immer mit niedriger
Drehzahl und während der Bohrer Kontakt mit dem
Werkstück hat. Bei höheren Drehzahlen kann sich der
Bohrer leicht verbiegen, wenn er sich ohne Kontakt mit
dem Werkstück frei drehen kann, und zu Verletzungen
führen.
u Üben Sie keinen übermäßigen Druck und nur in Längs-
richtung zum Bohrer aus. Bohrer können verbiegen und
dadurch brechen oder zu einem Verlust der Kontrolle und
zu Verletzungen führen.
Zusätzliche Sicherheitshinweise
u Schalten Sie das Elektrowerkzeug sofort aus, wenn
das Einsatzwerkzeug blockiert. Seien Sie auf hohe Re-
aktionsmomente gefasst, die einen Rückschlag verur-
sachen. Das Einsatzwerkzeug blockiert, wenn das
Elektrowerkzeug überlastet wird oder es im zu bearbei-
tenden Werkstück verkantet.
u Halten Sie das Elektrowerkzeug gut fest. Beim Festzie-
hen und Lösen von Schrauben können kurzzeitig hohe Re-
aktionsmomente auftreten.
u Sichern Sie das Werkstück. Ein mit Spannvorrichtungen
oder Schraubstock festgehaltenes Werkstück ist sicherer
gehalten als mit Ihrer Hand.
u Verwenden Sie geeignete Suchgeräte, um verborgene
Versorgungsleitungen aufzuspüren, oder ziehen Sie
die örtliche Versorgungsgesellschaft hinzu. Kontakt
mit Elektroleitungen kann zu Feuer und elektrischem
Schlag führen. Beschädigung einer Gasleitung kann zur
Explosion führen. Eindringen in eine Wasserleitung verur-
sacht Sachbeschädigung oder kann einen elektrischen
Schlag verursachen.
u Warten Sie, bis das Elektrowerkzeug zum Stillstand
gekommen ist, bevor Sie es ablegen. Das Einsatzwerk-
zeug kann sich verhaken und zum Verlust der Kontrolle
über das Elektrowerkzeug führen.
Produkt- und
Leistungsbeschreibung
Lesen Sie alle Sicherheitshinweise und An-
weisungen. Versäumnisse bei der Einhaltung
der Sicherheitshinweise und Anweisungen
1 609 92A 5Y4 | (26.11.2020) Bosch Power Tools

Chat with your Bosch DIY EasyImpact 600 manual using AI

Get instant AI answers from your Bosch DIY EasyImpact 600 manual

Ask anything about the Bosch DIY EasyImpact 600. Answers come from this manual, with the pages they are based on.

EasyImpact 600 Maintenance Schedule

Before each use
Check moving parts and damage

Inspect moving parts for proper function and check for broken or damaged parts that may affect operation. Repair before use.

Before each use
Keep cutting tools sharp and clean

Maintain cutting tools with sharp edges to prevent binding and ensure easier control.

Before each use
Clean handles and grip surfaces

Keep handles dry, clean, and free from oil and grease to ensure safe handling and control.

As needed
Clean tool and ventilation slots

Keep the power tool and ventilation slots clean to ensure safe and efficient operation.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend EasyImpact 600?

Yes No

Frequently Asked Questions

A

The EasyImpact 600 is designed for impact drilling in brick, concrete and stone and for drilling in wood, metal, ceramic and plastic. Models with electronic control and reversible rotation are also suitable for screwdriving and thread cutting.

Is this answer helpful?

A

Key specs: 600 W rated input, 300 W max output, no-load speed 0–3,000 rpm, impact rate up to 45,000 bpm, rated torque 1.4 Nm, chuck capacity 2–13 mm, max drilling diameters: concrete 12 mm, steel 10 mm, wood 25 mm, weight 1.7 kg.

Is this answer helpful?

A

Always wear eye protection and, for impact drilling, hearing protection. Use a dust mask (P2) when generating hazardous dust, protective gloves for tool changes, and ensure good ventilation or dust extraction to reduce inhalation risk.

Is this answer helpful?

A

Use the selector switch labeled “Drilling/Impact Drilling.” The switch clicks into place and can be changed even while the motor is running; set it to the drilling symbol for screwdriving to avoid impact action.

Is this answer helpful?

A

Keep the tool and ventilation slots clean, inspect accessories for damage, and have the power cable or internal repairs performed only by Bosch or an authorized service center. Use original spare parts to ensure safety and performance.

Is this answer helpful?

A

Use carbide-tipped masonry bits for concrete and brick, sharpened HSS twist drills for metal, and appropriate wood bits for timber. Use a universal bit holder for screwdriver bits and match bit type to the screw head.

Is this answer helpful?

A

Yes. Typical sound pressure level is about 91 dB(A) and vibration values are 3 m/s² for metal drilling and 16.5 m/s² for impact drilling in concrete. Wear hearing protection and plan work/rest cycles to reduce vibration exposure.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact and lightweight (1.7 kg) for comfortable DIY use and easy handling.
  • Variable speed (0–3,000 rpm) and impact mode (up to 45,000 bpm) for versatile drilling.
  • Keyless 2–13 mm chuck and reversible rotation for quick tool changes and screwdriving.
  • Auxiliary handle with 12 positions and depth stop for stable, controlled drilling.
  • Measured noise and vibration data provided to guide PPE and safe operation.
VS

Disadvantages

  • Moderate rated torque (1.4 Nm) may limit heavy-duty fastening tasks.
  • Noise level (~91 dB(A)) requires mandatory hearing protection for impact drilling.
  • Impact drilling vibration (16.5 m/s²) can be high during prolonged use.
  • Wired design limits mobility compared with cordless alternatives.
  • Replacement of power cable must be done by authorized service, adding potential cost.
M: OA-GPT-5-NAN

Product Specification

Type

Impact Drill

Power

600W

No-load Speed

0-3,000/min

No-load Impact Rate

0-45,000/min

Drilling Capacity

Wood 0.98 in, Steel 0.39 in, Concrete 0.47 in

Torque

12.39 in-lb

Chuck Type

0.08-0.51 in Keyless Chuck, Spindle Lock

Features

Right/Left Rotation, Speed Control, Impact Rate Control, Impact Stop, Soft Grip, Auxiliary Handle, Depth Stop

Weight

3.75 lb

M: OA-GPT-54-NAN

Product Description

Bosch DIY EasyImpact 600 Electric Impact Drill Manual

The Bosch DIY EasyImpact 600 Electric Impact Drill is a compact, versatile corded impact drill engineered for homeowners and DIY enthusiasts. With a 600 W rated input and a maximum output of 300 W, this lightweight drill (1.7 kg) balances power and maneuverability for tasks across masonry, wood, and metal. It offers a keyless 2–13 mm chuck, variable speed (0–3,000 rpm), and impact mode (up to 45,000 bpm), making it suitable for drilling in concrete, brick and stone as well as precise drilling and screwdriving in wood, metal, ceramic and plastic.

Key features and usage

Equipped with reversible rotation, an auxiliary handle adjustable to 12 positions and a depth stop, the EasyImpact 600 supports secure, fatigue-reducing operation. The drill’s selector switch lets you change between drilling and hammer-drilling on the fly, and the trigger provides stepless speed control. A lock-on button enables continuous operation, while insulated gripping surfaces improve safety when working near concealed wiring. For screwdriving, use the universal bit holder and matching bits.

The manual emphasizes correct tool selection, proper maintenance and safe handling: keep work areas clean and well lit, use hearing and eye protection when impact drilling, avoid using the drill in wet conditions and secure workpieces with clamps or a vice. For masonry work use carbide-tipped bits; for metal use sharp HSS bits. Replace worn accessories and service the tool through authorized Bosch centers.

Performance and specifications

Nominal power input: 600 W; max. power output: 300 W. No-load speed 0–3,000 rpm; impact rate up to 45,000 bpm. Maximum drilling diameters: concrete 12 mm, steel 10 mm, wood 25 mm. Rated torque 1.4 Nm. Noise level around 91 dB(A) (use hearing protection); vibration values specified for metal drilling (3 m/s2) and concrete impact drilling (16.5 m/s2). The drill is double-insulated (Protection Class II) and designed for 230 V mains (can operate at 220 V).

Practical tips

Start drilling at low speed with the bit tip contacting the workpiece to avoid bending. Do not exceed the drill bit’s max speed rating. After prolonged low-speed use, run the drill at max speed unloaded for a few minutes to cool. Use a P2-rated respirator when working with hazardous dusts and ensure proper dust extraction where possible.

Notes

  • Use the auxiliary handle for better control and to reduce reaction torque risks.
  • Replace the power cable only through Bosch service centers.
  • Dispose of the tool and accessories according to local e-waste regulations (WEEE).
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly