Manual.ly Logo

Bosch DIY EasyImpact 600 Manual

0.0 · 0 Ratings

PDF manual · 77 Pages

English

M: OA-GPT-5-NAN
page

/ 77

Loading...
d3fb6ffd1f5c6760528d6d0e0979e43de6a3 page a
10 | English
English
Safety instructions
General Power Tool Safety Warnings
WARNING
Read all safety warnings, instruc-
tions, illustrations and specifica-
tions provided with this power tool. Failure to follow all in-
structions listed below may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cord-
less) power tool.
Work area safety
u Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
u Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
u Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
u Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
u Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrigerat-
ors. There is an increased risk of electric shock if your
body is earthed or grounded.
u Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of elec-
tric shock.
u Do not abuse the cord. Never use the cord for carry-
ing, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
u When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
u If operating a power tool in a damp location is un-
avoidable, use a residual current device (RCD) protec-
ted supply. Use of an RCD reduces the risk of electric
shock.
Personal safety
u Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inatten-
tion while operating power tools may result in serious per-
sonal injury.
u Use personal protective equipment. Always wear eye
protection. Protective equipment such as a dust mask,
non-skid safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce personal in-
juries.
u Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.
u Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal in-
jury.
u Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
u Dress properly. Do not wear loose clothing or jew-
ellery. Keep your hair and clothing away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
u If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
u Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe in-
jury within a fraction of a second.
Power tool use and care
u Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was de-
signed.
u Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
u Disconnect the plug from the power source and/or re-
move the battery pack, if detachable, from the power
tool before making any adjustments, changing ac-
cessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
u Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
u Maintain power tools and accessories. Check for mis-
alignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
1 609 92A 5Y4 | (26.11.2020) Bosch Power Tools

Chat with your Bosch DIY EasyImpact 600 manual using AI

Get instant AI answers from your Bosch DIY EasyImpact 600 manual

Ask anything about the Bosch DIY EasyImpact 600. Answers come from this manual, with the pages they are based on.

EasyImpact 600 Maintenance Schedule

Before each use
Check moving parts and damage

Inspect moving parts for proper function and check for broken or damaged parts that may affect operation. Repair before use.

Before each use
Keep cutting tools sharp and clean

Maintain cutting tools with sharp edges to prevent binding and ensure easier control.

Before each use
Clean handles and grip surfaces

Keep handles dry, clean, and free from oil and grease to ensure safe handling and control.

As needed
Clean tool and ventilation slots

Keep the power tool and ventilation slots clean to ensure safe and efficient operation.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend EasyImpact 600?

Yes No

Frequently Asked Questions

A

The EasyImpact 600 is designed for impact drilling in brick, concrete and stone and for drilling in wood, metal, ceramic and plastic. Models with electronic control and reversible rotation are also suitable for screwdriving and thread cutting.

Is this answer helpful?

A

Key specs: 600 W rated input, 300 W max output, no-load speed 0–3,000 rpm, impact rate up to 45,000 bpm, rated torque 1.4 Nm, chuck capacity 2–13 mm, max drilling diameters: concrete 12 mm, steel 10 mm, wood 25 mm, weight 1.7 kg.

Is this answer helpful?

A

Always wear eye protection and, for impact drilling, hearing protection. Use a dust mask (P2) when generating hazardous dust, protective gloves for tool changes, and ensure good ventilation or dust extraction to reduce inhalation risk.

Is this answer helpful?

A

Use the selector switch labeled “Drilling/Impact Drilling.” The switch clicks into place and can be changed even while the motor is running; set it to the drilling symbol for screwdriving to avoid impact action.

Is this answer helpful?

A

Keep the tool and ventilation slots clean, inspect accessories for damage, and have the power cable or internal repairs performed only by Bosch or an authorized service center. Use original spare parts to ensure safety and performance.

Is this answer helpful?

A

Use carbide-tipped masonry bits for concrete and brick, sharpened HSS twist drills for metal, and appropriate wood bits for timber. Use a universal bit holder for screwdriver bits and match bit type to the screw head.

Is this answer helpful?

A

Yes. Typical sound pressure level is about 91 dB(A) and vibration values are 3 m/s² for metal drilling and 16.5 m/s² for impact drilling in concrete. Wear hearing protection and plan work/rest cycles to reduce vibration exposure.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact and lightweight (1.7 kg) for comfortable DIY use and easy handling.
  • Variable speed (0–3,000 rpm) and impact mode (up to 45,000 bpm) for versatile drilling.
  • Keyless 2–13 mm chuck and reversible rotation for quick tool changes and screwdriving.
  • Auxiliary handle with 12 positions and depth stop for stable, controlled drilling.
  • Measured noise and vibration data provided to guide PPE and safe operation.
VS

Disadvantages

  • Moderate rated torque (1.4 Nm) may limit heavy-duty fastening tasks.
  • Noise level (~91 dB(A)) requires mandatory hearing protection for impact drilling.
  • Impact drilling vibration (16.5 m/s²) can be high during prolonged use.
  • Wired design limits mobility compared with cordless alternatives.
  • Replacement of power cable must be done by authorized service, adding potential cost.
M: OA-GPT-5-NAN

Product Specification

Type

Impact Drill

Power

600W

No-load Speed

0-3,000/min

No-load Impact Rate

0-45,000/min

Drilling Capacity

Wood 0.98 in, Steel 0.39 in, Concrete 0.47 in

Torque

12.39 in-lb

Chuck Type

0.08-0.51 in Keyless Chuck, Spindle Lock

Features

Right/Left Rotation, Speed Control, Impact Rate Control, Impact Stop, Soft Grip, Auxiliary Handle, Depth Stop

Weight

3.75 lb

M: OA-GPT-54-NAN

Product Description

Bosch DIY EasyImpact 600 Electric Impact Drill Manual

The Bosch DIY EasyImpact 600 Electric Impact Drill is a compact, versatile corded impact drill engineered for homeowners and DIY enthusiasts. With a 600 W rated input and a maximum output of 300 W, this lightweight drill (1.7 kg) balances power and maneuverability for tasks across masonry, wood, and metal. It offers a keyless 2–13 mm chuck, variable speed (0–3,000 rpm), and impact mode (up to 45,000 bpm), making it suitable for drilling in concrete, brick and stone as well as precise drilling and screwdriving in wood, metal, ceramic and plastic.

Key features and usage

Equipped with reversible rotation, an auxiliary handle adjustable to 12 positions and a depth stop, the EasyImpact 600 supports secure, fatigue-reducing operation. The drill’s selector switch lets you change between drilling and hammer-drilling on the fly, and the trigger provides stepless speed control. A lock-on button enables continuous operation, while insulated gripping surfaces improve safety when working near concealed wiring. For screwdriving, use the universal bit holder and matching bits.

The manual emphasizes correct tool selection, proper maintenance and safe handling: keep work areas clean and well lit, use hearing and eye protection when impact drilling, avoid using the drill in wet conditions and secure workpieces with clamps or a vice. For masonry work use carbide-tipped bits; for metal use sharp HSS bits. Replace worn accessories and service the tool through authorized Bosch centers.

Performance and specifications

Nominal power input: 600 W; max. power output: 300 W. No-load speed 0–3,000 rpm; impact rate up to 45,000 bpm. Maximum drilling diameters: concrete 12 mm, steel 10 mm, wood 25 mm. Rated torque 1.4 Nm. Noise level around 91 dB(A) (use hearing protection); vibration values specified for metal drilling (3 m/s2) and concrete impact drilling (16.5 m/s2). The drill is double-insulated (Protection Class II) and designed for 230 V mains (can operate at 220 V).

Practical tips

Start drilling at low speed with the bit tip contacting the workpiece to avoid bending. Do not exceed the drill bit’s max speed rating. After prolonged low-speed use, run the drill at max speed unloaded for a few minutes to cool. Use a P2-rated respirator when working with hazardous dusts and ensure proper dust extraction where possible.

Notes

  • Use the auxiliary handle for better control and to reduce reaction torque risks.
  • Replace the power cable only through Bosch service centers.
  • Dispose of the tool and accessories according to local e-waste regulations (WEEE).
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly