Manual.ly Logo

Benning MM 10-1 Manual

5.0 · 1 Ratings

PDF manual · 78 Pages

English

M: QW-35-FL
page

/ 78

Loading...
1194e07ef0c87ddf16782b3d4f464305d311 page 2b
43
03/ 2020
BENNING MM 10 –PV/ MM 10 –1
of the battery compartment cover.
- Lift the battery compartment cover to remove it from the housing and remove
the batteries from the battery compartment.
- Unscrew the four outer screws (black) from the bottom part of the housing.
Do not loosen any of the screws on the printed circuit of the
BENNING MM 10-PV/ MM 10-1!
- Lift the housing base at the bottom and remove it from the top of the front
part.
- Lift one end of the defective fuse out of the fuse holder.
- Push the defective fuse out of the fuse holder completely.
- Replace the defective fuse with another of the same rated power, same trig-
gering characteristics and same dimensions.
- Push the new fuse into the centre of the holder.
- Clip the housing base into the front part and replace the four screws.
- Insert the batteries into the battery compartment observing correct polarity,
place the battery compartment cover onto the bottom part and tighten the
screw.
- Replace the BENNING MM 10-PV/ MM 10-1 in its protective rubber holster
M
.
See g. 11: Fuse replacement
9.5 Calibration
Benning guarantees compliance with the technical and accuracy specications
stated in the operating manual for the rst 12 months after the delivery date.
To maintain accuracy of the measuring results, the device must be recalibrated in
regular intervals by our factory service. We recommend recalibrating the device
once a year. For this purpose, send the device to the following address:
Benning Elektrotechnik & Elektronik GmbH & Co. KG
Service Center
Robert-Bosch-Str. 20
D - 46397 Bocholt
9.6 Spare parts
Fuse F 11 A, 1000 V, 30 kA, D = 10 mm, L = 38 mm (item no. 10218772) for
BENNING MM 10-PV
Fuse F 440 mA, 1000 V, 10 kA, D = 10 mm, L = 34.9 mm (item no. 10016655)
for BENNING MM 10-1
10. Technical data of measuring accessories
- Standard: EN 61010-031
- Maximum rated voltage (operating voltage) of the BENNING TA PV measu-
ring adapter (item no. 10217846) for test and measuring electrical circuits,
which are not directly connected to the mains:
1500 VAC/ 2000 VDC
- Maximum rated voltage to earth () and measuring category for test and
measuring electrical circuits, which are directly connected to the mains:
Safety measuring lead (part no. 044145)
With push-on caps: 1000 V CAT III, 600 V CAT IV
Without push-on caps: 1000 V CAT II
Maximum rated current: 10 A
BENNING TA PV measuring adapter (item no. 10217846):
With push-on caps: 1000 V CAT III, 600 V CAT IV
Without push-on caps: 1000 VAC CAT II/ 1500 VDC CAT II
- Length: 1.4 m
- Protection class II (&), continuous double or reinforced insulation
- Contamination class: 2
- Ambient conditions:
Maximum barometric height for measurements: 2000 m
Temperature: 0 °C to + 50 °C, humidity 50 % to 80 %
- Only use the test leads if in perfect and clean condition as well as according
to this manual, since the protection provided could otherwise be impaired.
- Replace the measuring lead if the insulation is damaged or the conductor/
connector is interrupted.
- Do not touch the bare contact tips of the measuring leads. Only touch the
area behind the grip limit intended for your hands!
- Insert the bent terminals into the testing or measuring device.

Chat with your Benning MM 10-1 manual using AI

Get instant AI answers from your Benning MM 10-1 manual

Ask anything about the Benning MM 10-1. Answers come from this manual, with the pages they are based on.

MM 10-1 Maintenance Schedule

Remind me when maintenance is due
Yearly
Calibrate the multimeter

Send the device to Benning factory service for recalibration to maintain specified measurement accuracy.

Show in the manual (page 43)
Regularly
Clean the device housing

Wipe the exterior with a clean dry cloth. Do not use solvents or abrasives. Ensure battery contacts are free of electrolyte contamination.

Show in the manual (page 42)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend MM 10-1?

Yes No
0
User Pic

Deanna Jacobi

6 months ago

How does the mobile phone function work and is it easy to use?

0
User Pic

Manual.ly

6 months ago

The mobile phone function is designed for seamless integration with your smartphone, allowing you to control the product remotely via our dedicated app. It features an intuitive interface that makes setup quick and usage straightforward for all users.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Sara Kowalski

5 months ago

Does the mobile connectivity feature support both iOS and Android devices?

M: QW-35-FL

Frequently Asked Questions

A

The device is rated for up to 1000 V AC/DC in Category III and 600 V AC/DC in Category IV. When using the optional TA PV adapter with the MM 10-PV model, it can measure up to 2000 V DC.

Is this answer helpful?

A

Yes, the Benning MM 10-1 features a Bluetooth 4.0 interface. You can download the BENNING MM-CM Link app on Android or iOS devices to view real-time data and download logged measurements.

Is this answer helpful?

A

Select the continuity symbol on the rotary switch. Press the blue function key to activate the buzzer and LED. Touch the probes to the component; if resistance is below 200 ohms, the buzzer sounds and the LED lights up.

Is this answer helpful?

A

When the battery is depleted, the battery symbol on the display will blink. You should replace the two AA batteries immediately to avoid inaccurate readings or device failure.

Is this answer helpful?

A

No, the Benning MM 10-1 has an IP30 rating which means it offers no protection against water. It is designed for use only in dry indoor environments.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • True RMS measurement ensures accuracy with non-sinusoidal signals
  • High safety rating of CAT III 1000V and CAT IV 600V
  • Bluetooth connectivity allows wireless data transfer to mobile devices
  • AutoV/LoZ function simplifies voltage detection and range selection
  • Durable rubber housing protects against drops and impacts
VS

Disadvantages

  • Battery life may decrease significantly when using Bluetooth or backlight
  • Requires specific BENNING TA PV adapter for high voltage PV measurements
  • Limited to dry environments due to IP30 protection rating
  • Manual must be consulted for fuse replacement procedures
  • No water resistance makes it unsuitable for wet outdoor conditions
M: QW-35-FL

Product Specification

Measurement range

max. 0.4A, max. 1000V, 40MΩ

Package contents

Case, test leads, wire temperature sensor, battery

M: QW-35-FL

Product Description

Benning MM 10-1 Multimeter: Precision and Safety for Professionals

The Benning MM 10-1 Multimeter represents a significant leap in electrical measurement technology, designed specifically for skilled electricians and electrotechnically trained personnel. This robust device combines high accuracy with essential safety features, making it an indispensable tool for modern electrical diagnostics. Whether you are troubleshooting complex circuits or performing routine maintenance, the MM 10-1 delivers reliable results in dry environments.

Equipped with True RMS technology, this multimeter ensures precise readings even when dealing with non-sinusoidal waveforms common in today's electronic equipment. The device supports a wide range of measurements including direct and alternating voltage, current, resistance, frequency, and temperature. Its intelligent AutoV/LoZ function automatically detects the type of voltage and selects the optimal range, reducing user error and streamlining the testing process. The low input impedance effectively suppresses capacitive and inductive voltages, providing clearer signals in noisy environments.

Safety is paramount with the Benning MM 10-1. It meets strict CAT III 1000V and CAT IV 600V standards, ensuring protection against dangerous overvoltages. The unit features a durable rubber protective frame that safeguards the device from mechanical damage and allows it to stand upright during use. An integrated magnet enables hands-free operation by attaching the meter to metal surfaces. For those needing data tracking, the built-in Bluetooth interface connects seamlessly to smartphones and tablets via the BENNING MM-CM Link app, allowing for real-time monitoring and storage of up to 4000 measured values.

Key Features and Benefits

The Benning MM 10-1 stands out for its versatility and ease of use. The digital display offers a clear view of measurements with a bar graph for quick visual reference. Users can toggle between Celsius and Fahrenheit for temperature readings using the included Type K sensor. The device also includes a MIN/MAX function to capture peak values and a relative mode for offset measurements. Maintenance is straightforward with easy access to replaceable batteries and fuses, ensuring long-term reliability. Always remember to follow safety protocols, such as checking leads for damage before use and wearing appropriate personal protective equipment when working with live circuits.

Important Notes

  • Always verify the insulation of measuring leads before use.
  • Do not exceed the maximum rated voltage for your specific circuit category.
  • Replace batteries immediately if the indicator flashes to prevent measurement errors.
  • Ensure the device is powered off before changing fuses or batteries.
M: QW-35-FL

© Copyright 2026 Manual.ly