Manual.ly Logo

Benning CM P1 Manual

0.0 · 0 Ratings

PDF manual · 69 Pages

English

M: QW-35-FL
page

/ 69

Loading...
92794a7aa87a99750cac29553589b12f8f4b page d
11/ 2018
BENNING CM P1/ P2
13
Operating manual
BENNING CM P1/ P2
TRUE RMS Digital Current Clamp Meter for
- AC current measurement (BENNING CM P1)
- AC/ DC current measurement (BENNING CM P2)
Table of contents
1. User notes
2. Safety note
3. Scope of delivery
4. Unit description
5. General information
6. Ambient conditions
7. Electrical specifications
8. Measuring with the BENNING CM P1/ P2
9. Maintenance
10. Environmental note
1. User notes
These operating instructions are intended for
- qualified electricians and
- electrotechnically trained persons.
The BENNING CM P1/ P2 is intended for making measurements in dry environment. It must
not be used in power circuits with a nominal voltage higher than CAT III 600 V (More details in
Section 6. “Ambient conditions”).
The following symbols are used in these operating instructions and on the BENNING CM P1/ P2:
Application around and removal from HAZARDOUS LIVE conductors is permitted.
This symbol indicates an electrical hazard.
This symbol indicates sources of danger when using the BENNING CM P1/ P2
(see documentation).
This symbol on the BENNING CM P1/ P2 indicates that the unit is protection
insulated (safety class II).
This symbol appears in the display for a discharged battery
DC voltage or current
AC current or voltage
Earth (voltage to earth)

Chat with your Benning CM P1 manual using AI

Get instant AI answers from your Benning CM P1 manual

Ask anything about the Benning CM P1. Answers come from this manual, with the pages they are based on.

CM P1 Maintenance Schedule

Remind me when maintenance is due
Yearly
Calibrate the device

Send the device to Benning service center for regular recalibration to maintain measurement accuracy. Recommended interval is once a year.

Show in the manual (page 19)
As needed
Replace batteries

Replace the two AAA batteries when the battery symbol appears on the display. Ensure device is voltage-free before opening.

Show in the manual (page 18)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend CM P1?

Yes No

Frequently Asked Questions

A

The primary difference lies in their measurement capabilities. The BENNING CM P1 is designed exclusively for measuring Alternating Current (AC). In contrast, the BENNING CM P2 can measure both AC and Direct Current (DC), offering greater versatility for specific applications requiring DC analysis.

Is this answer helpful?

A

No, the BENNING CM P1/ P2 is intended for dry environments only. It has an IP 30 rating which offers no protection against water. Using it in wet conditions or exposing it to moisture can damage the device and create serious electrical hazards.

Is this answer helpful?

A

First, ensure the device is powered off. Place the unit face down, remove the screw from the battery cover on the rear, lift the cover, and remove the old batteries. Insert two new 1.5V AAA batteries observing correct polarity, then reattach the cover securely.

Is this answer helpful?

A

This device is rated for use in circuits with a nominal voltage up to CAT III 600 V. Exceeding this limit violates safety standards and may result in severe injury or equipment failure. Always adhere to these safety guidelines.

Is this answer helpful?

A

Yes, the blue H/INRUSH button serves as the Hold function. Pressing it once stores the current reading on the display. Pressing it again returns the device to normal measuring mode. A long press activates the inrush current measurement feature.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • True RMS technology ensures accurate readings on complex waveforms
  • Inrush current measurement captures high startup spikes effectively
  • Non-contact voltage detection enhances safety during inspections
  • Auto-ranging feature simplifies operation for all skill levels
  • Compact and lightweight design fits easily in toolkits
VS

Disadvantages

  • Battery life is significantly shorter for the DC-capable P2 model
  • No protection against water exposure limits use in wet conditions
  • Display backlight turns off automatically after ten seconds
  • Overload protection does not provide visual warning for total overload
  • Requires manual null balance for DC differential measurements
M: QW-35-FL

Product Specification

Measurement range

max. 400A, max. 600V

M: QW-35-FL

Product Description

Benning CM P1 Current Clamp Multimeter Review

The Benning CM P1 Current Clamp Multimeter stands as a robust tool for electricians and technicians seeking precision in AC current measurements. Designed with a True RMS digital readout, this device ensures accurate readings even when dealing with non-sinusoidal waveforms, making it indispensable for modern electrical diagnostics. The unit features a clear four-digit LCD display that automatically selects the measurement range, simplifying the workflow for professionals who need quick and reliable data.

Operating within a CAT III 600 V safety category, the meter is built to handle demanding environments while maintaining user safety. Its ergonomic design includes a protective jaw guard to prevent accidental contact with live conductors. The inclusion of an Inrush current function allows users to capture high startup currents for up to 100 milliseconds, a critical feature for analyzing motor loads and power supplies. Additionally, the Non-Contact Voltage (NCV) indicator provides a visual and audible alert for detecting AC voltages without physical contact, enhancing safety during troubleshooting sessions.

Powering the device are two standard AAA batteries, offering extended runtime for the BENNING CM P1 model. The unit also boasts an auto-power-off feature to conserve energy after approximately fifteen minutes of inactivity. With dimensions of 149 x 59 x 27.5 mm and a lightweight build of roughly 140 grams, it fits easily into any technician's toolkit. Whether you are checking residential circuits or industrial machinery, the Benning CM P1 delivers consistent performance and reliability.

M: QW-35-FL

© Copyright 2026 Manual.ly