Manual.ly Logo

Benning CM 12 Manual

5.0 · 1 Ratings

PDF manual · 58 Pages

English

M: QW-35-FL
page

/ 58

Loading...
05ebe4cf77dc2a2e86b096d446346211d3e5 page 19
25
08/ 2018
BENNING CM 12
Operating manual
BENNING CM 12
TRUE RMS digital current clamp multimeter for
- DC/ AC voltage measurements
- DC/ AC current measurements
- resistance measurements
- diode/ continuity tests
- capacity measurements
- frequency measurements
- effective power measurements
- power factor measurements (cos phi)
- phase sequence indication
Table of contents
1. User instructions
2. Safety instructions
3. Scope of delivery
4. Device description
5. General information of the digital current clamp multimeter
5.1 General information
5.2 AUTO SENSE mode
5.3 Key functions
5.4 Menu functions
5.5 Data logger function “LOG”
5.6 Memory function “MEM”
5.7 Data transmission to the smartphone/ tablet
6. Ambient conditions
7. Electrical specifications
8. Measuring with the BENNING CM 12
9. Maintenance
10. Technical data of measuring accessories
11. Environmental note
1. User instructions
This operating manual is intended for
- skilled electricians and
- electrotechnically trained personnel.
The BENNING CM 12 is intended for measurements under dry ambient condi-
tions. It must not be used in electrical circuits with a nominal voltage higher than
1000 V AC/ DC (see section 6 „Ambient conditions“ for details).
The following symbols are used in this operating manual and on the
BENNING CM 12:
Application around and removal from HAZARDOUS LIVE conductors
is permitted.
Warning of electrical danger!
Indicates instructions which must be followed to avoid danger to per-
sons.
Attention! Must comply with documentation!
This symbol indicates that the information provided in the operating
manual must be complied with in order to avoid risks.
This symbol on the BENNING CM 12 indicates that the BENNING CM 12
is equipped with protective insulation (protection class II).
This symbol on the BENNING CM 12 means that the BENNING CM 12
complies with the EU directives.
This symbol appears on the display to indicate a discharged battery.
This symbol designates the „diode test“ eld.
This symbol designates the „continuity test“ eld.
The buzzer is intended for acoustic result output.
This symbol marks the range „capacity testing”.
(DC) Direct voltage or current

Chat with your Benning CM 12 manual using AI

Get instant AI answers from your Benning CM 12 manual

Ask anything about the Benning CM 12. Answers come from this manual, with the pages they are based on.

CM 12 Maintenance Schedule

Remind me when maintenance is due
Yearly
Calibrate the device

Send the multimeter to Benning factory service for recalibration to maintain specified accuracy. Recommended interval is one year.

Show in the manual (page 40)
Regularly
Clean the housing

Wipe the outside of the unit with a clean dry cloth. Do not use solvents or abrasives. Ensure battery contacts are free from electrolyte leakage.

Show in the manual (page 40)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend CM 12?

Yes No
0
User Pic

RepudiandaeCorrupti67

5 months ago

Is the Benning current clamp suitable for electrical installations and measuring instruments?

0
User Pic

Manual.ly

5 months ago

Yes, the Benning current clamp is highly recommended for electrical installations. It provides accurate measurements and is considered a reliable tool for checking and verifying electrical systems. Many users find it essential to have this device when performing installation or maintenance tasks.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Abbigail Bosco

6 months ago

Does the Benning clamp work well with other measurement tools?

M: QW-35-FL

Frequently Asked Questions

A

The device supports a maximum nominal voltage of 1000 V AC/DC in Category III and 600 V AC/DC in Category IV. Exceeding these limits can damage the unit or cause safety hazards.

Is this answer helpful?

A

Yes, it features Bluetooth Low Energy 4.0. You can download the BENNING MM-CM Link app from the App Store or Google Play to view real-time data and logs on your Android or iOS device.

Is this answer helpful?

A

Select the AC Voltage or Current function, then navigate to the THD menu using the cursor keys. Press OK to start the measurement. The device will display the total harmonic distortion percentage and individual harmonics.

Is this answer helpful?

A

No, it has an IP 30 rating which protects against solid objects larger than 2.5 mm but offers no protection against water. It is intended for dry environments only.

Is this answer helpful?

A

Benning recommends calibrating the device every year to maintain the specified accuracy. Calibration services are available through their official service center.

Is this answer helpful?

A

When the battery is depleted, all segments in the battery symbol will disappear and the symbol will flash. You must replace the six AAA batteries immediately to prevent incorrect measurements.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Supports TRUE RMS measurements for high accuracy on complex waveforms
  • Features Bluetooth Low Energy 4.0 for wireless data transmission to mobile apps
  • Includes AUTO SENSE mode to automatically select correct range and coupling
  • Capable of measuring total harmonic distortion and power factor
  • High overload protection up to 1000 V CAT III and 600 V CAT IV
VS

Disadvantages

  • Requires six AAA batteries which may need frequent replacement during heavy use
  • Non-contact voltage indicator does not confirm absence of voltage
  • Limited water resistance with only IP 30 protection rating
  • Display backlight turns off after 15 seconds if no activity occurs
  • Accuracy decreases slightly with high crest factors above 3.0
M: QW-35-FL

Product Specification

Measurement range

max. 600A, max. 1000V, max. 100kΩ

Package contents

Bag, test leads

M: QW-35-FL

Product Description

Benning CM 12 Clamp Meter Multimeter Review

The Benning CM 12 Clamp Meter Multimeter stands as a robust solution for professional electricians and technicians who require precision in complex electrical environments. This TRUE RMS digital instrument is designed to handle a wide array of measurements, from direct current and alternating voltage to resistance and capacitance. Its intelligent AUTO SENSE mode automatically detects the correct range and coupling type, streamlining the workflow for users who need quick and accurate readings without manual configuration.

Equipped with advanced features like Bluetooth connectivity, this device allows for real-time data transmission to smartphones or tablets via the BENNING MM-CM Link app. Users can log up to 9,999 measurements using the built-in data logger or store 1,000 values manually. The unit also excels in analyzing power quality, offering functions to measure total harmonic distortion (THD), power factor, and phase sequence. Whether you are troubleshooting single-phase loads or managing three-phase systems, the Benning CM 12 provides the reliability needed for CAT III 1000 V and CAT IV 600 V applications.

Safety is paramount with this tool. It features a non-contact voltage indicator and strict adherence to safety standards ensures protection against dangerous voltages. The durable design includes a large clamp opening for easy access to thick cables, and the clear LCD display with backlighting ensures readability even in dim conditions. With its comprehensive suite of measurement capabilities and wireless integration, the Benning CM 12 is an essential addition to any electrical toolkit.

Key Features

  • TRUE RMS Technology: Ensures accurate readings on non-sinusoidal waveforms.
  • Bluetooth Connectivity: Seamless data transfer to mobile devices for analysis.
  • AUTO SENSE Mode: Automatically selects the best measuring range and type.
  • Data Logging: Stores extensive measurement series for later review.
  • Phase Sequence Detection: Quickly identifies rotation direction in three-phase systems.

Important Notes

Always ensure the device is free of voltage before performing maintenance or battery replacement. Use only the provided safety leads for high-voltage measurements to maintain CAT III and CAT IV compliance. Regular calibration is recommended annually to preserve measurement accuracy.

M: QW-35-FL

© Copyright 2026 Manual.ly