Manual.ly Logo

Axkid Spinkid Manual

0.0 · 0 Ratings

PDF manual · 120 Pages

English

M: OA-GPT-5-NAN
page

/ 120

Loading...
cc67d1794ee67518609924ab7acd8897b42d page a
1010
Thnk you for choosing Axkid SPINKID
Read this instruction manual before installing the child seat in your vehicle.
For more information and installation videos visit www.axkid.com.
Axkid SPINKID is a rear-facing car seat approved for children with
a height between 40-105 cm, ≤18 kg
This is an i-Size Enhanced Child Restraint System. It is approved according to UN Regulation No. 129, for use in, i-Size compatible vehicle
seating positions as indicated by vehicle manufacturers in the vehicle user’s manual. If in doubt, consult either the Enhanced Child Restraint
System manufacturer (www.axkid.com) or the retailer.
Important information
To maximize your child’s safety, it is important that you keep the following in mind:
• Always follow the instructions in this manual. An incorrect installation may seriously aect the safety for your child. If in doubt, contact
your retailer who can demonstrate a correct installation.
• Keep this instruction manual for future reference. If manual is lost, you can find it online at www.axkid.com
• Do not use the child seat in a seating position where an active frontal airbag is fitted. If you still wish to install the child seat in this location
the airbag must be switched o according to the vehicle manufacturers instructions.
• Should you have an accident, no matter how small, your car seat should always be replaced. It may have damage that is not visible and
could seriously aect the safety of your child. For this reason, Axkid does not recommend purchasing secondhand car seats.
• If the child seat has been exposed to direct sunlight, make sure the child seat is not too hot before installing your child.
• Never leave your child unattended in the vehicle.
• Ensure that any luggage or loose objects are secured in your vehicle as they may cause injuries to passengers in the event of an ac-
cident.
• Ensure that the child seat is installed in a way where no parts become trapped by movable seats, car doors, etc.
• Do not attempt to disassemble or modify any part of the child seat. The warranty and the safety performance of the Axkid car seat could
be aected if doing so.
• Never use the child seat without the textile cover. The seat textile cover is a safety feature and may only be replaced with an Axkid origi-
nal seat textile cover.
• Read the vehicle handbook and the vehicle list at www.axkid.com to find which seating positions are suitable for this car seat.
• Axkid recommends to always use a seat protection to protect your vehicle seat from scratches and dirt.
• If you have any doubts, contact the retailer where the car seat was purchased or contact info@axkid.com.
• The child seat may only be installed rear-facing.
• Always make sure that the harness is adjusted to correctly fit your child’s body. The harness is adjusted by moving the head support.
• Make sure that the child’s back is pushed against the car seat when restraining your child with the harness.
• Always make sure that the harness is firmly tightened against your child and that the buckle is completely locked, you should not be able
to pinch the straps.
• Make sure there is no twist in the harness.
• Always make sure the support leg is in its correct position and that is has contact with the vehicle floor. The support leg is a very impor-
tant safety feature designed to maximise your child’s safety in an accident.

Chat with your Axkid Spinkid manual using AI

Get instant AI answers from your Axkid Spinkid manual

Ask anything about the Axkid Spinkid. Answers come from this manual, with the pages they are based on.

Spinkid Maintenance Schedule

As needed
Wash textile cover

Machine wash at 30C gentle cycle. Do not use dryer as it may damage fabric and padding.

Show in the manual (page 18)
As needed
Clean plastic parts

Clean with mild detergent and water only. Do not use aggressive chemicals or solvents.

Show in the manual (page 18)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Spinkid?

Yes No

Frequently Asked Questions

A

Axkid SPINKID is approved for rear-facing use for children with a height between 40–105 cm and up to 18 kg. Use the infant insert for roughly 40–75 cm; remove it as the child grows beyond the insert’s fit.

Is this answer helpful?

A

Install SPINKID using its ISOFIX connectors: fold out the support leg, release and position the anti-rebound/front brace, extend ISOFIX until they click and indicators turn green, push the seat toward the vehicle seat, then lower and lock the support leg until its visual indicator turns green.

Is this answer helpful?

A

Do not install SPINKID on a seat with an active frontal airbag. If you must use that position, the vehicle’s airbag must be disabled following the vehicle manufacturer’s instructions; some vehicles require an authorized service center.

Is this answer helpful?

A

Adjust the headrest to position the harness height so shoulder straps are at or just above your child’s shoulders. Tighten the harness using the harness tension strap until you cannot fit more than one finger between the strap and the child’s shoulder; ensure no twists and that the buckle is fully locked.

Is this answer helpful?

A

Remove the textile cover following the manual and machine wash at 30°C on a gentle cycle; do not tumble dry. Clean plastic parts with mild detergent and water; avoid aggressive chemicals. Use only original Axkid replacement covers to maintain safety.

Is this answer helpful?

A

Replace the Axkid SPINKID after any crash, even minor. Invisible damage can compromise safety. Axkid advises against buying or using secondhand seats due to unknown crash history.

Is this answer helpful?

A

Axkid provides a 24-month warranty from purchase. It does not cover normal wear and tear, damage from incorrect use, negligence, accidents, third-party repairs, or UV-related fading of materials. Keep your purchase receipt for claims.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • i-Size Enhanced approval (UN R129) for rear-facing safety up to 105 cm/18 kg
  • ISOFIX installation with visual indicators for secure, tool-free attachment
  • Adjustable headrest, removable infant insert, and four recline positions for growth and comfort
  • Support leg with visual green indicator to confirm correct floor contact
  • Removable machine-washable cover and straightforward cleaning instructions
VS

Disadvantages

  • Cannot be used forward-facing; rear-facing only may require more vehicle space
  • Must not be installed where an active frontal airbag is present unless disabled
  • Textile cover must be Axkid original to maintain safety—limits third-party replacements
  • Seat must be replaced after any accident; no recommended secondhand use
  • Installation requires correct vehicle ISOFIX/i-Size compatibility and following manual closely
M: OA-GPT-5-NAN

Product Specification

Group

i-Size

Weight class

0-39.68 lb

Age group

0-4Y

Harness type

Five-point safety harness

Installation

Rearward facing

Features

height-adjustable headrest and shoulder straps, side impact protection, adjustable seating position, recline position, swivel function, newborn insert, magnetic harness holder

Dimensions (WxHxD)

17.32x24.80x24.80in

Weight

32.06 lb

M: OA-GPT-54-NAN

Product Description

Axkid SPINKID — Axkid Spinkid Manual

Axkid SPINKID is a rear-facing, i-Size Enhanced child restraint designed for children 40–105 cm (up to 18 kg). Approved under UN Regulation No. 129, SPINKID installs using ISOFIX and is intended for i-Size compatible seating positions. The seat includes features to grow with the child: an adjustable headrest, removable infant insert (for ~40–75 cm), multiple recline positions, and a support leg with a visual indicator to confirm correct floor contact.

Key product features

SPINKID emphasizes safety and usability. It installs with ISOFIX connectors that click and display green when engaged. A front brace (anti-rebound bar) and adjustable support leg stabilize the seat. The harness is adjusted by moving the headrest; shoulder straps must sit at or just above the child’s shoulders and tightened so only one finger fits between strap and shoulder. The seat rotates to an outer locked position to ease placing the child in the seat. Four fixed recline positions allow comfort adjustments even when the child is strapped in.

The seat shell and textiles are serviceable: the textile cover is removable and machine washable at 30°C on a gentle cycle (do not tumble dry). Plastic parts clean with mild detergent and water; aggressive chemicals are prohibited. Replacement textiles and parts must be genuine Axkid products to preserve safety performance. After any collision the seat should be replaced; Axkid discourages buying secondhand seats.

Installation and positioning

SPINKID must be used rear-facing and is approved for i-Size seating positions. Never install on a seat with an active frontal airbag unless the airbag is disabled per vehicle manufacturer instructions. Installation steps include folding out the support leg, releasing and positioning the anti-rebound bar, extending and clicking the ISOFIX connectors, then lowering and locking the support leg (visual indicator turns green). To remove, collapse the support leg, fold the front brace, and retract ISOFIX connectors.

Maintenance and end-of-life

The cover can be washed at 30°C; do not tumble dry. Follow the manual’s removal and reinstallation steps to avoid damaging plastic components or harness parts. Axkid recommends recycling old seats: cut harness straps, remove cover and foam, separate metals/plastics when possible, and mark the shell as unsafe to prevent reuse.

Notes

  • Always follow manufacturer and vehicle manuals for seat placement and airbag guidance.
  • Replace the seat after any crash, even minor.
  • Use only original Axkid replacement parts and textiles.
  • Never leave a child unattended in the vehicle.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly