Manual.ly Logo

Axkid Minikid 2.0 Manual

0.0 · 0 Ratings

PDF manual · 66 Pages

English

M: QW-35-FL
page

/ 66

Loading...
9f847f6082ad2c87f1b2169c409778b6ee8e page 10
9
Care and maintenance
The seat cover can be removed and washed in a washing machine at 30º C on the “Gentle
Cycle” programme. Do not put the cover in a dryer as this can damage the cover and the
padding may separate from the fabric.
Visit www.axkid.com to nd videos explaining how to remove and attach the cover.
Any plastic parts of Minikid can be cleaned with mild detergent and water. Do not use
aggressive chemicals containing solvents etc, as this can cause damage to the plastic and
compromise the safety of the child restraint.
All materials used in the Minikid child restraint are recyclable and should be recycled as per
your local legislation. Ask your local recycling centre for advice when recycling this product.
Do not make any modications or alterations to the Minikid child restraint other than those
described in this instruction manual. Follow the instructions in this manual carefully. Any repairs
must be carried out by the manufacturer or agent.
If the seat cover needs replacing ensure only original products from Axkid are used. If other
products are used the Minikid’s safety system may be compromised and could lead to severe
injury or death in case of an accident.
All materials used have a very high UV-resistance rating. However, UV-light is very aggressive
and will ultimately lead to fading of the seat cover. This is not covered by our warranty as it is
considered normal wear and tear.
Warranty
The Minikid child restraint is covered by a 24 month warranty from date of purchase. Ensure
you save your receipt and bring it to your place of purchase should you have any warranty
issues. The warranty does not cover:
* Normal wear and tear
* Damage due to incorrect use, neglect or accident
* If repairs have been carried out by a third party
Carefully pull out the plastic rod (i) holding the seat-back fabric to the seat. Pull the seat-back fabric
forward and feed the crotch strap through the seat-base fabric. You can now, starting from the top of
the seat cover, carefully remove the seat cover ensuring you release any Velcro® tabs as you do so.
To t the cover, reverse the above steps ensuring the harness and shoulder pads are routed correctly.
32

Chat with your Axkid Minikid 2.0 manual using AI

Get instant AI answers from your Axkid Minikid 2.0 manual

Ask anything about the Axkid Minikid 2.0. Answers come from this manual, with the pages they are based on.

Minikid 2.0 Maintenance Schedule

As needed
Wash the seat cover

Remove the cover and wash it in a washing machine at 30°C on the Gentle Cycle. Do not use a dryer as it can damage the padding.

Show in the manual (page 16)
As needed
Clean plastic parts

Clean all plastic parts with mild detergent and water. Do not use aggressive chemicals or solvents as they may compromise safety.

Show in the manual (page 16)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Minikid 2.0?

Yes No

Frequently Asked Questions

A

No, Axkid does not recommend using the Minikid 2.0 from birth. It is best suited for children from approximately six months of age or once they can sit unaided, as younger infants need more specialized support.

Is this answer helpful?

A

The side impact pad is optional but highly recommended. It adds an extra layer of protection against side collisions and should be attached whenever possible for enhanced safety.

Is this answer helpful?

A

Once your child reaches 25 kg, they have reached the maximum weight limit for the Minikid 2.0. You should then transition to a different child restraint system appropriate for their size.

Is this answer helpful?

A

You can remove the cover and wash it in a washing machine on a gentle cycle at 30 degrees Celsius. Do not use a tumble dryer as it may damage the padding and fabric.

Is this answer helpful?

A

Yes, Axkid recommends replacing the child restraint after any accident, no matter how small. Invisible damage may compromise the safety structure, putting your child at risk.

Is this answer helpful?

A

No, never install the seat on a seat with an active airbag. If installing in the front passenger seat, the airbag must be disconnected at an authorized service center.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Enables rear-facing travel up to 25 kg for maximum safety
  • Includes a support leg to increase crash stability
  • Side impact pads provide extra lateral protection
  • Removable cover is machine washable at 30 degrees Celsius
  • Headrest height adjusts automatically with the harness
VS

Disadvantages

  • Requires disabling the front passenger airbag for installation
  • Seat takes up significant space in smaller vehicles
  • Must be replaced after any accident regardless of visible damage
  • Support leg requires floor clearance which may not fit all cars
  • Manual installation can be complex for first-time users
M: QW-35-FL

Product Specification

Group

0+/1/2

Weight Class

0-25kg

Age Group

0-6Y

Color

blue

Harness Type

Five-point safety harness

Installation

Rear-facing

Isofix

No

Features

Height-adjustable headrest and shoulder straps, side impact protection, adjustable seat position, newborn insert, removable/washable cover, tensioners

Dimensions (WxDxH)

17.3x24.4x22.0in

Weight

25.13lbs

M: QW-35-FL

Product Description

Axkid Minikid 2.0 Blue: Ultimate Rear-Facing Safety for Your Child

Welcome to the world of superior child safety with the Axkid Minikid 2.0 in a striking blue finish. This car seat is designed with one primary goal: to keep your child safe by allowing them to travel rear-facing for as long as possible, up to 25 kg. Research consistently shows that rear-facing travel significantly reduces the risk of serious injury compared to forward-facing seats. The Minikid 2.0 embodies this philosophy, offering a robust solution for parents who prioritize their child's well-being above all else.

The Minikid 2.0 is suitable for children from approximately six months of age until they reach 25 kg, typically around six years old. Its design ensures that even smaller infants receive adequate support during those critical first months. The seat features an integrated harness system that adjusts automatically as the headrest moves, ensuring a snug and secure fit every time. A standout feature is the support leg, which must always be used during installation. This leg provides crucial stability and absorbs impact forces, working in tandem with the vehicle seat belt and tether straps to create a rigid, safe environment for your little one.

Installation is straightforward when following the manual carefully. The seat requires a three-point seat belt and can be installed on any forward-facing passenger seat, provided the airbag is disabled. The seat includes side impact pads that offer extra protection against lateral collisions, a feature we strongly recommend using whenever possible. The covers are removable and machine washable at 30 degrees Celsius, making maintenance easy while preserving the high-quality materials used throughout the product.

Remember, if you have been in an accident, no matter how minor, the restraint should be replaced immediately due to potential invisible damage. The Minikid 2.0 Blue is not just a car seat; it is a commitment to safety backed by over 30 years of experience from the Axkid team.

Important Notes

  • Always use the support leg during installation.
  • Never install on a seat with an active airbag.
  • Replace the seat after any collision.
  • Use only original Axkid replacement parts.
  • Ensure the airbag indicator light confirms the airbag is off.
M: QW-35-FL

© Copyright 2026 Manual.ly