Manual.ly Logo

Axkid Minikid 2.0 Manual

0.0 · 0 Ratings

PDF manual · 66 Pages

English

M: QW-35-FL
page

/ 66

Loading...
9f847f6082ad2c87f1b2169c409778b6ee8e page a
3
EN
Axkid Minikid
Instruction Manual
Rear-facing 0-25 kg with vehicle seat belt and tethers
Read this instruction manual carefully before installing the Minikid child restraint. If in doubt, contact
your retailer who can demonstrate a correct installation. An incorrect installation could endanger
your child.
Axkid always recommends using an infant carrier until the child is steady enough to sit unaided.
Axkid does not recommend using Minikid 0-25 kg from birth, because smaller children need better
support and protection the rst couple of months of life.
Do not use a child restraint in a seating position where an active airbag is tted. If you still wish to
install the Minikid in this location the airbag must be disconnected at an authorised service centre.
Some vehicles may be equipped with a switch which allows you to manually switch the airbag o. It
is important to always check if the vehicle’s indicator light shows that the airbag is turned o.
Extensive research has shown that the risk of serious injury or worse is ve times greater for a young
child when in a forward facing restraint compared to a rearward-facing restraint. In Minikid your child
can travel rearward-facing up to 25kg.
Always use the support leg when installing the Minikid seat. The support leg is a very important
safety feature designed to maximise your child’s safety in an accident.
Should you have an accident, no matter how small, your child restraint should be replaced. It may
have damage that is undetectable and could seriously jeopardize your child’s safety. For this reason
Axkid do not recommend purchasing second hand child restraints.
Never leave your child unattended in the car.
Ensure any luggage or loose objects are secured in your vehicle as they may cause injuries to
passengers in the event of a collision.
Store this instruction manual in the designated pocket (O) on the car seat.
Read this instruction manual before installing the Minikid child restraint in your vehicle. For
more information and installation videos visit www.axkid.com.
Thank you for choosing an Axkid child seat. Our team has over 30 years combined experience within child
safety, and we have done our utmost to make the Minikid child seat as safe as possible. The Minikid child
restraint is approved according to ECE R44/04, the latest European standards for child safety. To maximise
your child’s safety it is important that you keep the following in mind;
Important information
V10

Chat with your Axkid Minikid 2.0 manual using AI

Get instant AI answers from your Axkid Minikid 2.0 manual

Ask anything about the Axkid Minikid 2.0. Answers come from this manual, with the pages they are based on.

Minikid 2.0 Maintenance Schedule

As needed
Wash the seat cover

Remove the cover and wash it in a washing machine at 30°C on the Gentle Cycle. Do not use a dryer as it can damage the padding.

Show in the manual (page 16)
As needed
Clean plastic parts

Clean all plastic parts with mild detergent and water. Do not use aggressive chemicals or solvents as they may compromise safety.

Show in the manual (page 16)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Minikid 2.0?

Yes No

Frequently Asked Questions

A

No, Axkid does not recommend using the Minikid 2.0 from birth. It is best suited for children from approximately six months of age or once they can sit unaided, as younger infants need more specialized support.

Is this answer helpful?

A

The side impact pad is optional but highly recommended. It adds an extra layer of protection against side collisions and should be attached whenever possible for enhanced safety.

Is this answer helpful?

A

Once your child reaches 25 kg, they have reached the maximum weight limit for the Minikid 2.0. You should then transition to a different child restraint system appropriate for their size.

Is this answer helpful?

A

You can remove the cover and wash it in a washing machine on a gentle cycle at 30 degrees Celsius. Do not use a tumble dryer as it may damage the padding and fabric.

Is this answer helpful?

A

Yes, Axkid recommends replacing the child restraint after any accident, no matter how small. Invisible damage may compromise the safety structure, putting your child at risk.

Is this answer helpful?

A

No, never install the seat on a seat with an active airbag. If installing in the front passenger seat, the airbag must be disconnected at an authorized service center.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Enables rear-facing travel up to 25 kg for maximum safety
  • Includes a support leg to increase crash stability
  • Side impact pads provide extra lateral protection
  • Removable cover is machine washable at 30 degrees Celsius
  • Headrest height adjusts automatically with the harness
VS

Disadvantages

  • Requires disabling the front passenger airbag for installation
  • Seat takes up significant space in smaller vehicles
  • Must be replaced after any accident regardless of visible damage
  • Support leg requires floor clearance which may not fit all cars
  • Manual installation can be complex for first-time users
M: QW-35-FL

Product Specification

Group

0+/1/2

Weight Class

0-25kg

Age Group

0-6Y

Color

blue

Harness Type

Five-point safety harness

Installation

Rear-facing

Isofix

No

Features

Height-adjustable headrest and shoulder straps, side impact protection, adjustable seat position, newborn insert, removable/washable cover, tensioners

Dimensions (WxDxH)

17.3x24.4x22.0in

Weight

25.13lbs

M: QW-35-FL

Product Description

Axkid Minikid 2.0 Blue: Ultimate Rear-Facing Safety for Your Child

Welcome to the world of superior child safety with the Axkid Minikid 2.0 in a striking blue finish. This car seat is designed with one primary goal: to keep your child safe by allowing them to travel rear-facing for as long as possible, up to 25 kg. Research consistently shows that rear-facing travel significantly reduces the risk of serious injury compared to forward-facing seats. The Minikid 2.0 embodies this philosophy, offering a robust solution for parents who prioritize their child's well-being above all else.

The Minikid 2.0 is suitable for children from approximately six months of age until they reach 25 kg, typically around six years old. Its design ensures that even smaller infants receive adequate support during those critical first months. The seat features an integrated harness system that adjusts automatically as the headrest moves, ensuring a snug and secure fit every time. A standout feature is the support leg, which must always be used during installation. This leg provides crucial stability and absorbs impact forces, working in tandem with the vehicle seat belt and tether straps to create a rigid, safe environment for your little one.

Installation is straightforward when following the manual carefully. The seat requires a three-point seat belt and can be installed on any forward-facing passenger seat, provided the airbag is disabled. The seat includes side impact pads that offer extra protection against lateral collisions, a feature we strongly recommend using whenever possible. The covers are removable and machine washable at 30 degrees Celsius, making maintenance easy while preserving the high-quality materials used throughout the product.

Remember, if you have been in an accident, no matter how minor, the restraint should be replaced immediately due to potential invisible damage. The Minikid 2.0 Blue is not just a car seat; it is a commitment to safety backed by over 30 years of experience from the Axkid team.

Important Notes

  • Always use the support leg during installation.
  • Never install on a seat with an active airbag.
  • Replace the seat after any collision.
  • Use only original Axkid replacement parts.
  • Ensure the airbag indicator light confirms the airbag is off.
M: QW-35-FL

© Copyright 2026 Manual.ly