Manual.ly Logo

Atika KS 2002/40 Manual

1.0 · 1 Ratings

PDF manual · 167 Pages

English

M: QW-35-FL
page

/ 167

Loading...
eb6ffe989cfeae2f852cf6aee59cfdb9363c page 1d
28
Chain wheel
The demand of the chain wheel (13) is particularly great. Check
regularly the teeth of the chain wheel for wear or damages.
A worn or damaged chain wheel reduces the
durability of the saw chain and should therefore
immediately be exchanged by the customer service.
Checking of the oil automatic
Check the function of the automatic chain lubrication by
switching on the chain saw and holding it with the pike in
direction of a carton or paper on the ground.
Do not get in contact with the ground with the chain. Keep a
safe distance of 20 cm.
If an increasing oil track is caused when checking it the oil
automatic works faultless.
If there is no oil track despite full oil tank
clean the oil flow canal (14) and the upper chain
clamping boring (15).
If this is not successful please contact the customer service.
Cleaning
Clean the chain saw thoroughly after each application so that
the faultless function is kept.
Clean the case with a soft brush or a dry cloth.
Water, solvents and polishing agents shall not be
applied.
Pay attention to that the ventilation slots for the motor
cooling are free (risk of overheating).
In case of harder pollution or resins put the chain for some
hours in a container with chain cleaner. Afterwards wash up
the chain with clear water.
Remove all adhering substances with a brush from the chain
wheel (13) and the guide bar fastening.
Clean the oil flow canal (14) with a clean cloth.
Transport
Remove mains plug before each transport.
Transport the chain only with the chain protection put on.
When transporting the product within a car put it in the boot or
on a separate loading area. Secure the chain saw against
tipping over.
Storage
Store unused equipment in a dry, locked place out of the
reach of children.
To extend the service life of the saw and guarantee smooth
operation, before storing for a longer period
thoroughly clean the chain saw
Remove the oil from the oil tank.
Hint:
Some chain oils tend to encrustations after a longer
period. For this reason the oil system should be flushed
before a longer storing with a chain saw cleaner. Fill the
cleaner up to the middle (appr. 50 ml) into the oil tank.
Close the tank. Switch on the chain saw without
assembled guide bar and chain until the complete
cleaner has left the oil opening of the chain saw.
Put the saw chain for a short time into an oil bath and
enwrap it afterwards in an oil paper.

Chat with your Atika KS 2002/40 manual using AI

Get instant AI answers from your Atika KS 2002/40 manual

Ask anything about the Atika KS 2002/40. Answers come from this manual, with the pages they are based on.

KS 2002/40 Maintenance Schedule

Before each use
Check chain brake function

Start engine, hold saw with both hands, press front hand guard. Chain must stop immediately. Do not use if brake fails.

Show in the manual (page 26)
During use (every 10 mins)
Check and adjust saw chain tension

Check tension after first cuts and regularly every 10 minutes during sawing. Adjust until chain lifts 3-4mm in center of guide bar.

Show in the manual (page 26)
After each use
Clean the chain saw

Clean case with soft brush or dry cloth. Ensure ventilation slots are free. Clean oil flow channel and remove debris from chain wheel.

Show in the manual (page 29)
After each use
Inspect for wear and damage

Check chain, guide bar, and chain wheel for wear. Verify all covers and safety devices are correctly assembled and intact.

Show in the manual (page 28)
Regularly
Check chain wheel teeth

Inspect chain wheel teeth for wear or damage. Replace immediately via customer service if worn to avoid reducing chain life.

Show in the manual (page 29)
As needed
Sharpen the saw chain

Sharpen when only dust is produced or pressing is required. Use correct angles: 30 deg sharpening, 85 deg breast angle. Depth gauge 0.64 mm.

Show in the manual (page 28)
Before long-term storage
Flush oil system and clean saw

Thoroughly clean saw. Drain oil tank and flush system with chain cleaner to prevent encrustation. Store chain in oil bath and wrapped in oil paper.

Show in the manual (page 29)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend KS 2002/40?

Yes No
0
User Pic

tross68

5 months ago

How long does this chainsaw typically last before breaking down?

0
User Pic

Manual.ly

5 months ago

Based on user feedback, some units have experienced failures after approximately 22 months of light use. While the purchase price is low, we recommend registering your product for warranty support if you encounter defects within the coverage period.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Roderick Schaden

4 months ago

Is it worth buying this saw given reports of early failure?

M: QW-35-FL

Frequently Asked Questions

A

You should only fell trees where the trunk diameter is smaller than the 400 mm guide bar length to ensure safety and proper control.

Is this answer helpful?

A

No, the Atika KS 2002/40 is strictly designed for cutting wood. Using it on masonry, plastic, or metal is dangerous and will damage the tool.

Is this answer helpful?

A

Check the chain tension before every start, after the first few cuts, and regularly every 10 minutes during continuous use to prevent accidents.

Is this answer helpful?

A

No, the oil tank is not filled at delivery. You must fill it with biodegradable chain saw oil before the first use to prevent damage.

Is this answer helpful?

A

No, minors are strictly prohibited from operating this chainsaw. Only persons with sufficient experience and training should use it.

Is this answer helpful?

A

If the chain jams, switch off the machine immediately, remove the plug, and use a wedge to free the guide bar before restarting.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Powerful 2000 W motor for efficient cutting
  • Chain brake stops the saw in under 0.1 seconds
  • Claw stopper provides stability during cutting
  • Automatic chain lubrication system included
  • Suitable for private garden and hobby use
VS

Disadvantages

  • Not suitable for professional forestry work
  • Corded design limits mobility compared to battery models
  • Requires regular sharpening and maintenance
  • Cannot be used in wet conditions or rain
  • Must avoid cutting above shoulder height for safety
M: QW-35-FL

Product Specification

Type

Chainsaw

Power

2668.3W

Bar Length

15.75in

Chain Speed

44.29ft/s

Chain Pitch

0.375"

Chain Oil Tank

6.76fl oz

Features

Softgrip, Additional Handle, Brushless Motor, Tool-Free Chain Tensioning, Automatic Chain Lubrication, Chain Brake, Claw Stop

Vibration Level

16.04ft/s²

Noise Emission

109dB(A)

Weight

12.57lb

Package Contents

Saw Bar (Oregon), Saw Chain (Oregon), Bar Guard

M: QW-35-FL

Product Description

Atika KS 2002/40 Electric Chainsaw Review

The Atika KS 2002/40 is a robust electric chainsaw designed specifically for private use in home gardens and hobbyist projects. With a powerful 2000-watt motor, this tool delivers efficient cutting performance for tasks such as sawing logs, branches, wooden beams, and boards. The machine features a 400 mm guide bar, making it ideal for handling medium-sized wood pieces without the bulk of larger professional models.

Safety is a primary focus with the KS 2002/40. It includes a chain brake that stops the saw chain in less than 0.1 seconds upon activation via the front hand guard or release of the trigger. This feature significantly reduces the risk of injury from kickback, a common hazard when the tip of the guide bar hits an object. The device also comes with a claw stopper that acts as a lever to help stabilize the saw during cuts, further enhancing user control.

Operation is straightforward once assembled. Users must ensure the chain is correctly tensioned and lubricated before starting. The oil tank holds approximately 235 ml, allowing for extended periods of work before refilling. The automatic chain lubrication system ensures the chain remains cool and sharp throughout operation. For power, the saw connects to a standard 230 V outlet. When using extension cords, it is crucial to select one with sufficient cross-section to prevent voltage drops that could reduce motor performance.

Maintenance is simplified by accessible components. The cover can be easily removed to check the chain wheel and replace the saw chain if necessary. Regular cleaning of ventilation slots prevents overheating, while sharpening the chain keeps cuts clean and safe. The manufacturer recommends using only original spare parts to maintain safety standards and warranty validity.

Important Notes

  • Do not operate the saw above shoulder height or on unstable surfaces like ladders.
  • Always wear protective gear including eye protection, hearing protection, and cut-resistant gloves.
  • Never cut materials other than wood, such as plastic or masonry.
  • Ensure the area is free of people and animals before starting work.
M: QW-35-FL

© Copyright 2026 Manual.ly