Manual.ly Logo

Atika KS 2002/40 Manual

1.0 · 1 Ratings

PDF manual · 167 Pages

English

M: QW-35-FL
page

/ 167

Loading...
eb6ffe989cfeae2f852cf6aee59cfdb9363c page 14
19
Contents
Extent of delivery 19
EC-Declaration of conformity 19
Operating times 19
Symbols on the chain saw 20
Symbols Operating instructions 20
Normal intended use 20
Residual risks 20
Security instructions 20
General safety instructions
20
Work area safety
21
Electrical safety
21
Safety of persons
21
Power tool use and care
21
Service
21
Chain saw safety warnings
21
Causes and operator prevention of kickback
22
Vibrations 23
Assembly 24
Before the first commissioning 24
Chain lubrication
24
Charging the oil tank
24
Commissioning 24
Before sawing
24
Mains connection
24
Mounting of the extension cable
24
Switching On/Off
25
Chain brake
25
Checking of chain brake
25
Clamping of saw chain
25
Working with the chain saw 25
Operating
25
Additional advices for sawing trunks
26
Additional advices for sawing timber under
tension/release
26
Additional advices for chopping down trees
26
Maintenance and cleaning 27
Maintenance
27
Sharpening of saw chain
27
Exchanging saw chain and guide bar
27
Chain wheel
28
Checking of the oil automatic
28
Cleaning
28
Transport 28
Storage 28
Possible faults 29
Technical data 29
Discription of chain saw / Spare parts 30
Guarantee 30
Extent of delivery
After unpacking, check the contents of the box
That it is complete
Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
1 chain saw
1 guide bar
1 saw chain
1 chain protection
1 operating instructions
EC Declaration of Conformity
No. (S-No.): 16710
according to EC directive:
2006/42/EC
We,
ATIKA GmbH
Josef-Drexler-Str. 8, 89331 Burgau - Germany
herewith declare under our sole responsibility that the product
Kettensäge (chain saw) type KS 2002/40
Serial number: 000001 – 020000
is conform with the above mentioned EC directives as well as
with the provisions of the guidelines below:
2000/14/EC, 2014/30/EC and 2011/65/CE.
Conformity assessment procedure:
2000/14/EC - Appendix V
Measured sound power level L
WA
107 dB (A).
Guaranteed sound power level L
WA
109 dB (A).
Following harmonized standards have been applied:
EN 60745-1:2009+A11, EN 60745-2-13:2009+A1
EN 55014-1:2006+A1, EN 55014-2:1997+A1+A2
EN 61000-3-2:2006+A1+A2, EN 61000-3-11:2000
Keeping of technical documents at:
ATIKA GmbH – technical department
Josef-Drexler-Str. 8, 89331 Burgau - Germany
EC type examination carried out by:
TÜV Rheinland Product Safety GmbH
Certificate no.: BM 50260834
i.A.
Burgau, 18.05.2016 i.A. G. Koppenstein
Engineering design management
Operating times
Before initiating the device please observe the provisions
pertaining to corresponding laws (regional provisions) for the
noise control.

Chat with your Atika KS 2002/40 manual using AI

Get instant AI answers from your Atika KS 2002/40 manual

Ask anything about the Atika KS 2002/40. Answers come from this manual, with the pages they are based on.

KS 2002/40 Maintenance Schedule

Before each use
Check chain brake function

Start engine, hold saw with both hands, press front hand guard. Chain must stop immediately. Do not use if brake fails.

Show in the manual (page 26)
During use (every 10 mins)
Check and adjust saw chain tension

Check tension after first cuts and regularly every 10 minutes during sawing. Adjust until chain lifts 3-4mm in center of guide bar.

Show in the manual (page 26)
After each use
Clean the chain saw

Clean case with soft brush or dry cloth. Ensure ventilation slots are free. Clean oil flow channel and remove debris from chain wheel.

Show in the manual (page 29)
After each use
Inspect for wear and damage

Check chain, guide bar, and chain wheel for wear. Verify all covers and safety devices are correctly assembled and intact.

Show in the manual (page 28)
Regularly
Check chain wheel teeth

Inspect chain wheel teeth for wear or damage. Replace immediately via customer service if worn to avoid reducing chain life.

Show in the manual (page 29)
As needed
Sharpen the saw chain

Sharpen when only dust is produced or pressing is required. Use correct angles: 30 deg sharpening, 85 deg breast angle. Depth gauge 0.64 mm.

Show in the manual (page 28)
Before long-term storage
Flush oil system and clean saw

Thoroughly clean saw. Drain oil tank and flush system with chain cleaner to prevent encrustation. Store chain in oil bath and wrapped in oil paper.

Show in the manual (page 29)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend KS 2002/40?

Yes No
0
User Pic

tross68

5 months ago

How long does this chainsaw typically last before breaking down?

0
User Pic

Manual.ly

5 months ago

Based on user feedback, some units have experienced failures after approximately 22 months of light use. While the purchase price is low, we recommend registering your product for warranty support if you encounter defects within the coverage period.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Roderick Schaden

4 months ago

Is it worth buying this saw given reports of early failure?

M: QW-35-FL

Frequently Asked Questions

A

You should only fell trees where the trunk diameter is smaller than the 400 mm guide bar length to ensure safety and proper control.

Is this answer helpful?

A

No, the Atika KS 2002/40 is strictly designed for cutting wood. Using it on masonry, plastic, or metal is dangerous and will damage the tool.

Is this answer helpful?

A

Check the chain tension before every start, after the first few cuts, and regularly every 10 minutes during continuous use to prevent accidents.

Is this answer helpful?

A

No, the oil tank is not filled at delivery. You must fill it with biodegradable chain saw oil before the first use to prevent damage.

Is this answer helpful?

A

No, minors are strictly prohibited from operating this chainsaw. Only persons with sufficient experience and training should use it.

Is this answer helpful?

A

If the chain jams, switch off the machine immediately, remove the plug, and use a wedge to free the guide bar before restarting.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Powerful 2000 W motor for efficient cutting
  • Chain brake stops the saw in under 0.1 seconds
  • Claw stopper provides stability during cutting
  • Automatic chain lubrication system included
  • Suitable for private garden and hobby use
VS

Disadvantages

  • Not suitable for professional forestry work
  • Corded design limits mobility compared to battery models
  • Requires regular sharpening and maintenance
  • Cannot be used in wet conditions or rain
  • Must avoid cutting above shoulder height for safety
M: QW-35-FL

Product Specification

Type

Chainsaw

Power

2668.3W

Bar Length

15.75in

Chain Speed

44.29ft/s

Chain Pitch

0.375"

Chain Oil Tank

6.76fl oz

Features

Softgrip, Additional Handle, Brushless Motor, Tool-Free Chain Tensioning, Automatic Chain Lubrication, Chain Brake, Claw Stop

Vibration Level

16.04ft/s²

Noise Emission

109dB(A)

Weight

12.57lb

Package Contents

Saw Bar (Oregon), Saw Chain (Oregon), Bar Guard

M: QW-35-FL

Product Description

Atika KS 2002/40 Electric Chainsaw Review

The Atika KS 2002/40 is a robust electric chainsaw designed specifically for private use in home gardens and hobbyist projects. With a powerful 2000-watt motor, this tool delivers efficient cutting performance for tasks such as sawing logs, branches, wooden beams, and boards. The machine features a 400 mm guide bar, making it ideal for handling medium-sized wood pieces without the bulk of larger professional models.

Safety is a primary focus with the KS 2002/40. It includes a chain brake that stops the saw chain in less than 0.1 seconds upon activation via the front hand guard or release of the trigger. This feature significantly reduces the risk of injury from kickback, a common hazard when the tip of the guide bar hits an object. The device also comes with a claw stopper that acts as a lever to help stabilize the saw during cuts, further enhancing user control.

Operation is straightforward once assembled. Users must ensure the chain is correctly tensioned and lubricated before starting. The oil tank holds approximately 235 ml, allowing for extended periods of work before refilling. The automatic chain lubrication system ensures the chain remains cool and sharp throughout operation. For power, the saw connects to a standard 230 V outlet. When using extension cords, it is crucial to select one with sufficient cross-section to prevent voltage drops that could reduce motor performance.

Maintenance is simplified by accessible components. The cover can be easily removed to check the chain wheel and replace the saw chain if necessary. Regular cleaning of ventilation slots prevents overheating, while sharpening the chain keeps cuts clean and safe. The manufacturer recommends using only original spare parts to maintain safety standards and warranty validity.

Important Notes

  • Do not operate the saw above shoulder height or on unstable surfaces like ladders.
  • Always wear protective gear including eye protection, hearing protection, and cut-resistant gloves.
  • Never cut materials other than wood, such as plastic or masonry.
  • Ensure the area is free of people and animals before starting work.
M: QW-35-FL

© Copyright 2026 Manual.ly