Manual.ly Logo

Atika HS 710/61 Manual

0.0 · 0 Ratings

PDF manual · 73 Pages

English

M: QW-35-FL
page

/ 73

Loading...
85e3e4d2e45e346d9556e3f15a3472fd858c page 10
5. Release the switch (10) and make sure that it engages. The
handhold is fixed.
15
Working instructions
Before commencing work, ensure the following:
Workplace tidied?
You may not start to operate the machine until you have
read these operating instructions, observed all the
instructions given and installed the machine as described!
Always keep the ventilation apertures free.
Scare animals off the hedge before starting to cut in order to
prevent them from being injured.
Working with the hedge trimmer, page 4, fig. C - G
Hold the hedge trimmer with both hands on a safe
distance from the body.
The extension cable must be kept behind the hedge trimmer
when cutting so that it can not be caught by the knives, fig.
D.
Due to its double sided knives the hedge trimmer can be
guided forward and backward or by oscillating movements
from one to another side, fig. G.
At first cut the sides of the hedge and then the upper edge.
Cut the hedge from the bottom up.
Cut the hedge in trapezium shape, fig. C.
Stretch a guide over the complete length of the hedge when
you want to shorten the upper edge of the hedge evenly.
Remove unconditionally any foreign objects out of the
hedge (e.g. wires) as these can damage the knives of the
hedge trimmer.
If persons who have blood circulation problems are too
often exposed to vibrations damages to the nervous system or
to blood vessels may occur.
You can reduce vibrations
- by thick and warm working gloves,
- shorter working time (have longer breaks).
See a doctor if your fingers swell, you don’t feel well or your
fingers become numb.
Ensure that you always comply with the safety
Instructions given on p. 13 ff.
Maintenance and Care
Remove the plug from the power socket
before starting any maintenance or
cleaning work.
For maintaining and cleaning, removed security devices must
unconditionally be mounted properly and proved again.
Use only original parts. Other parts can result in unexpected
damages and injuries.
L
Observe the following to maintain the functionality of the
hedge trimmer.
Clean and oil all moving parts regularly.
Clean or suck off respectively the ventilation slots.
Never clean the knives with water Î Risk of corrosion!
L
Never use any grease!
Use environmentally friendly oil.
Storage
Remove the mains plug
from the socket.
Store unused equipment in a dry, locked place out of the
reach of children.
To extend the service life of the hedge trimmer and
guarantee smooth operation, before storing for a longer
period
− thoroughly clean the hedge trimmer
− treat all movable parts with an environmentally friendly
oil
L
Never use any grease!
Push the knife protection on the knife.
Guarantee
Please observe the enclosed terms of guarantee.

Chat with your Atika HS 710/61 manual using AI

Get instant AI answers from your Atika HS 710/61 manual

Ask anything about the Atika HS 710/61. Answers come from this manual, with the pages they are based on.

HS 710/61 Maintenance Schedule

Regularly
Clean and oil all moving parts

Clean and oil all moving parts regularly to maintain functionality. Use environmentally friendly oil; never use grease.

Show in the manual (page 16)
Regularly
Clean ventilation slots

Clean or vacuum the ventilation slots regularly to ensure proper motor cooling.

Show in the manual (page 16)
Regularly
Check power cable

Regularly check the connection cable for damage. Replace damaged cables immediately using an authorized specialist.

Show in the manual (page 15)
Regularly
Check extension cables

Regularly inspect extension cables and replace them if they are damaged.

Show in the manual (page 15)
Before long-term storage
Thorough cleaning and oiling before storage

Perform a thorough cleaning and treat all movable parts with environmentally friendly oil before storing the device for a longer period.

Show in the manual (page 16)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend HS 710/61?

Yes No

Frequently Asked Questions

A

The electric hedge trimmer operates on a 230 V~ voltage with a frequency of 50 Hz. This standard voltage ensures compatibility with most household electrical outlets in Europe when used with the correct grounded socket.

Is this answer helpful?

A

No, this device is designed strictly for private use in house and hobby gardens. It is not intended for use in public facilities, parks, sports grounds, or in agriculture and silviculture. Commercial use invalidates the manufacturer's liability.

Is this answer helpful?

A

To prevent damage, remove all metallic objects like wires from the hedge before cutting. Do not force the machine against overly thick branches. Avoid using the trimmer in wet conditions to prevent rust. Store the product with the blade protection cover engaged.

Is this answer helpful?

A

The cutting gap is 22 mm, which means the device can effectively cut branches up to this thickness. Cutting thicker branches may damage the knife blades or cause internal motor issues.

Is this answer helpful?

A

Yes, safety regulations require specific cable cross-sections. You must use a cable with at least 1.5 mm² for lengths up to 25 meters. For lengths over 25 meters, a cable with 2.5 mm² cross-section is required for safety.

Is this answer helpful?

A

Some vibration is normal due to the motor and blade movement. However, excessive vibration may indicate blocked blades or missing lubrication. Always use warm working gloves to reduce vibration impact on your hands.

Is this answer helpful?

A

No, you should never clean the blades with water. This creates a high risk of corrosion and rust, which will degrade cutting performance. Clean the blades manually and apply environmentally friendly oil instead.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Robust motor with 1710 W power for efficient cutting of thick branches up to 22 mm.
  • Adjustable rear handle allows for ergonomic positioning to reduce user fatigue.
  • Double-sided blades enable forward, backward, and pendulum cutting motions.
  • Two-hand safety switch system prevents accidental activation during use.
  • Lightweight design around 3.3 kg makes it easier to handle for extended periods.
VS

Disadvantages

  • Electric corded power limits mobility and requires careful cable management.
  • High noise level up to 103 dB requires hearing protection for safety.
  • Stricterly limited to private garden use, not allowed for commercial applications.
  • Blades require regular sharpening and oiling to prevent overheating and corrosion.
  • Cannot operate in wet weather or rain due to electrical safety risks.
M: QW-35-FL

Product Specification

Type

Hedge Trimmer

Power

710W

Cutting Length

20.87 in

Cutting Capacity

0.87 in

Features

Auxiliary Handle

Weight

8.60 lbs

M: QW-35-FL

Product Description

Maintaining Your Garden with Atika Tools

A Powerful Solution for Homeowners

If you are looking to keep your hedges neat and manageable, the Atika HS 710/61 Electric Hedge Trimmer stands out as a reliable choice for domestic gardening enthusiasts. This powerful tool is designed specifically for private use in house and hobby gardens, ensuring you have the strength needed to tackle thick branches without the effort of manual pruning. When operating this equipment, it is highly recommended to familiarize yourself with the comprehensive Atika HS 710/61 Electric Hedge Trimmer Manual to ensure safe assembly and usage. Reading through these guidelines before starting will prevent accidents and extend the life of your machine significantly.

Technical Specifications and Performance

The device boasts a robust motor that delivers consistent power for efficient cutting. With a no-load speed of 1600 rpm, the blades move rapidly to slice through vegetation cleanly. The HS 710/61 features a blade length of 610 mm, allowing for precise cuts on medium-sized hedges. It can handle branches up to 22 mm in thickness, making it versatile for various shrub types. The double-sided cutting blades offer flexibility, enabling forward and backward motions as well as pendulum movements. The ergonomic design includes an adjustable rear handle with multiple positions, allowing users to find a comfortable angle for cutting from the top or sides. This adaptability ensures less fatigue during long gardening sessions.

Safety Features First

Safety is a top priority with this model. It includes a two-hand safety switch that prevents accidental activation. Both hands must be on the handles for the machine to run, which significantly reduces the risk of injury during operation. The unit also comes with essential protective gear attachments, such as handguards. However, users should always wear safety goggles and gloves when operating the machinery to protect against flying debris. Always check the manual to understand residual risks associated with vibration and noise. The guaranteed sound power level is noted, reminding users of the need for hearing protection during extended work sessions. It is strictly for private use and should not be used in public areas or under wet conditions to avoid electrical hazards.

Maintenance and Care

To ensure longevity, regular maintenance is crucial. You should clean the ventilation slots and lubricate all moving parts after each use. Never wash the blades with water, as this promotes corrosion and rust. The handles must remain dry and free from oil or grease to maintain a secure grip while working. Store the device in a dry place away from children, and always engage the knife protection cover when the tool is not in use. The machine requires a specific extension cable thickness depending on length to prevent voltage drop. By following these guidelines and referring to the official guide, you keep this trimmer in top condition for seasons to come. Proper sharpening of blades when dull is also necessary to prevent overheating and ensure clean cuts for healthy plant growth.

M: QW-35-FL

© Copyright 2026 Manual.ly