Manual.ly Logo

Atika HS 710/61 Manual

0.0 · 0 Ratings

PDF manual · 73 Pages

English

M: QW-35-FL
page

/ 73

Loading...
85e3e4d2e45e346d9556e3f15a3472fd858c page f
− Transport and storage
− Leaving of hedge trimmer (even during short
interruptions)
Maintain your hedge trimmer with care:
− Keep the tools sharp and clean to be able to work better
and more safely
− Keep handles dry and free of oils and grease.
− Follow the servicing instructions
Check the machine for possible damage:
− Before continuing to use the machine, the protective
devices must be inspected to ensure that they work
perfectly and with their intended function
14
− Check whether the movable parts function perfectly
and do not stick or whether the parts are damaged. All
parts must be correctly installed and fulfil all conditions
to ensure perfect operation of the hedge trimmer
− Damaged guards and parts must be properly repaired
or exchanged by a recognized, specialist workshop;
insofar as nothing else is stated in the instructions for
use.
− Damaged or illegible safety warning labels should be
replaced immediately.
Do not allow any tool key to be plugged in!
Before switching on, check always that wrenches and
adjusting tools are removed.
Store the unused machine in a dry locked place away from
the reach of children.
Electrical safety
Design of the connection cable according to IEC 60245
(H 07 RN-F) with a core cross-profile section of at least
− 1.5 mm
2
for cable lengths up to 25m
− 2.5 mm
2
for cable lengths over 25m
Protect yourself against an electric shock. Avoid touching
earthed parts with your body.
Do not use the cable for purposes for which it is not meant.
Protect the cable against heat, oil and sharp edges. Do
not use the cable to pull the plug from the socket.
Never carry the device at the connecting cable.
Check regularly the cable of the hedge shears and get
possible damages repaired by an accepted specialist.
When taking the connecting line take care that it does not
disturb, is not squeezed, bended and the connection
assembly does not get wet.
Regularly check the extension cables and replace them if
they are damaged.
Do not use any defective connection cables.
When working outdoors, only use extension cables
especially approved and appropriately labelled for outdoor
use.
Do not set up any provisional electrical connections.
Never bypass protective devices or deactivate them.
Connect the device via earth leakage circuit breaker
(30 mA).
The electrical connection or repairs to electrical parts of
the machine must be carried out by a certified electrician
or one of our customer service points. Local regulations –
especially regarding protective measures – must be
observed.
Repairs to other parts of the machine must be carried out
by the manufacturer or one of his customer service
points.
Use only original spare parts, accessories and special
accessory parts. Accidents can arise for the user through
the use of other spare parts. The manufacturer is not
liable for any damage or injury resulting from such action.
Commissioning
Mains connection
Compare the voltage given on the machine model plate e.g.
230 V with the mains voltage and connect the hedge trimmer to
the relevant and properly earthed plug.
L
Alternating current motor:
Use a shockproof plug, mains voltage 230 V with
residual current circuit breaker and 10 A inert fuses.
Use connection cable or extension cable respectively with a
cross section of at least 1,5 mm².
Mounting of the extension cable
In order to prevent an unintended loosening of the
connection assembly put the extension cable as noose through
the opening on the rear handhold and put it over the cable
mounting. Page 4, fig. D.
Switch on
Do not use any device where the switch can not be
switched on and off. Damaged switches must be repaired
or replaced immediately by the customer service.
The hedge shears has a two-hand protective shut-down which
prevents an unintended switching on.
Push the circuit closer/breaker on the rear handhold (8)
and operate at the same time with the other hand the switch
button on the front handhold (6), page 2, fig. A.
Switching off
For switching off the device release the circuit
closer/breaker or the switch button.
Adjustments on the hedge trimmer
Turn handhold, page 3 fig. B
The handhold can be set to 5 working positions (45° raster)
1. During the setting the circuit closer/breaker on the rear
handhold (8) can not be operated.
2. Hold the hedge shear on the front handhold (8), page 3, fig.
B.
3. Push the switch (10) backwards.
4. The rear handhold (8) can be turned into the desired
position.

Chat with your Atika HS 710/61 manual using AI

Get instant AI answers from your Atika HS 710/61 manual

Ask anything about the Atika HS 710/61. Answers come from this manual, with the pages they are based on.

HS 710/61 Maintenance Schedule

Regularly
Clean and oil all moving parts

Clean and oil all moving parts regularly to maintain functionality. Use environmentally friendly oil; never use grease.

Show in the manual (page 16)
Regularly
Clean ventilation slots

Clean or vacuum the ventilation slots regularly to ensure proper motor cooling.

Show in the manual (page 16)
Regularly
Check power cable

Regularly check the connection cable for damage. Replace damaged cables immediately using an authorized specialist.

Show in the manual (page 15)
Regularly
Check extension cables

Regularly inspect extension cables and replace them if they are damaged.

Show in the manual (page 15)
Before long-term storage
Thorough cleaning and oiling before storage

Perform a thorough cleaning and treat all movable parts with environmentally friendly oil before storing the device for a longer period.

Show in the manual (page 16)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend HS 710/61?

Yes No

Frequently Asked Questions

A

The electric hedge trimmer operates on a 230 V~ voltage with a frequency of 50 Hz. This standard voltage ensures compatibility with most household electrical outlets in Europe when used with the correct grounded socket.

Is this answer helpful?

A

No, this device is designed strictly for private use in house and hobby gardens. It is not intended for use in public facilities, parks, sports grounds, or in agriculture and silviculture. Commercial use invalidates the manufacturer's liability.

Is this answer helpful?

A

To prevent damage, remove all metallic objects like wires from the hedge before cutting. Do not force the machine against overly thick branches. Avoid using the trimmer in wet conditions to prevent rust. Store the product with the blade protection cover engaged.

Is this answer helpful?

A

The cutting gap is 22 mm, which means the device can effectively cut branches up to this thickness. Cutting thicker branches may damage the knife blades or cause internal motor issues.

Is this answer helpful?

A

Yes, safety regulations require specific cable cross-sections. You must use a cable with at least 1.5 mm² for lengths up to 25 meters. For lengths over 25 meters, a cable with 2.5 mm² cross-section is required for safety.

Is this answer helpful?

A

Some vibration is normal due to the motor and blade movement. However, excessive vibration may indicate blocked blades or missing lubrication. Always use warm working gloves to reduce vibration impact on your hands.

Is this answer helpful?

A

No, you should never clean the blades with water. This creates a high risk of corrosion and rust, which will degrade cutting performance. Clean the blades manually and apply environmentally friendly oil instead.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Robust motor with 1710 W power for efficient cutting of thick branches up to 22 mm.
  • Adjustable rear handle allows for ergonomic positioning to reduce user fatigue.
  • Double-sided blades enable forward, backward, and pendulum cutting motions.
  • Two-hand safety switch system prevents accidental activation during use.
  • Lightweight design around 3.3 kg makes it easier to handle for extended periods.
VS

Disadvantages

  • Electric corded power limits mobility and requires careful cable management.
  • High noise level up to 103 dB requires hearing protection for safety.
  • Stricterly limited to private garden use, not allowed for commercial applications.
  • Blades require regular sharpening and oiling to prevent overheating and corrosion.
  • Cannot operate in wet weather or rain due to electrical safety risks.
M: QW-35-FL

Product Specification

Type

Hedge Trimmer

Power

710W

Cutting Length

20.87 in

Cutting Capacity

0.87 in

Features

Auxiliary Handle

Weight

8.60 lbs

M: QW-35-FL

Product Description

Maintaining Your Garden with Atika Tools

A Powerful Solution for Homeowners

If you are looking to keep your hedges neat and manageable, the Atika HS 710/61 Electric Hedge Trimmer stands out as a reliable choice for domestic gardening enthusiasts. This powerful tool is designed specifically for private use in house and hobby gardens, ensuring you have the strength needed to tackle thick branches without the effort of manual pruning. When operating this equipment, it is highly recommended to familiarize yourself with the comprehensive Atika HS 710/61 Electric Hedge Trimmer Manual to ensure safe assembly and usage. Reading through these guidelines before starting will prevent accidents and extend the life of your machine significantly.

Technical Specifications and Performance

The device boasts a robust motor that delivers consistent power for efficient cutting. With a no-load speed of 1600 rpm, the blades move rapidly to slice through vegetation cleanly. The HS 710/61 features a blade length of 610 mm, allowing for precise cuts on medium-sized hedges. It can handle branches up to 22 mm in thickness, making it versatile for various shrub types. The double-sided cutting blades offer flexibility, enabling forward and backward motions as well as pendulum movements. The ergonomic design includes an adjustable rear handle with multiple positions, allowing users to find a comfortable angle for cutting from the top or sides. This adaptability ensures less fatigue during long gardening sessions.

Safety Features First

Safety is a top priority with this model. It includes a two-hand safety switch that prevents accidental activation. Both hands must be on the handles for the machine to run, which significantly reduces the risk of injury during operation. The unit also comes with essential protective gear attachments, such as handguards. However, users should always wear safety goggles and gloves when operating the machinery to protect against flying debris. Always check the manual to understand residual risks associated with vibration and noise. The guaranteed sound power level is noted, reminding users of the need for hearing protection during extended work sessions. It is strictly for private use and should not be used in public areas or under wet conditions to avoid electrical hazards.

Maintenance and Care

To ensure longevity, regular maintenance is crucial. You should clean the ventilation slots and lubricate all moving parts after each use. Never wash the blades with water, as this promotes corrosion and rust. The handles must remain dry and free from oil or grease to maintain a secure grip while working. Store the device in a dry place away from children, and always engage the knife protection cover when the tool is not in use. The machine requires a specific extension cable thickness depending on length to prevent voltage drop. By following these guidelines and referring to the official guide, you keep this trimmer in top condition for seasons to come. Proper sharpening of blades when dull is also necessary to prevent overheating and ensure clean cuts for healthy plant growth.

M: QW-35-FL

© Copyright 2026 Manual.ly