Manual.ly Logo

Atika HS 710/61 Manual

0.0 · 0 Ratings

PDF manual · 73 Pages

English

M: QW-35-FL
page

/ 73

Loading...
85e3e4d2e45e346d9556e3f15a3472fd858c page d
12
Contents
Declaration of conformity 5-6
Device description / Spare parts 12
Extent of delivery 12
Assembly 12
Symbols machine 12
Symbols used in the operating instructions 12
Characteristic noise values 12
Normal intended use 13
Residual risks 13
Safe working 13
Commissioning 14
Adjustments on the hedge trimmer 14
Working instructions 15
Maintenance and care 15
Storage 15
Guarantee 15
Possible faults 15
Technical data 16
Description / Spare parts
Pos. Denomination Order-No.
1. Knife
2. Cover strip 362983
3. Impact protection with suspension
shackle
362984
4.
a) Knife protection 610 mm
362985
b) Knife protection 710 mm
362991
5.
Hand guard
362986
6. Front handhold with switch button 362987
7. Ventilation slots
8. Rear handhold with circuit closer
and circuit breaker
9. ON-OFF switch 362988
10.
Switch for the angular motion of
the rear handhold
11. Cable with power plug
12. Carbon brush set (without picture) 362989
13. Safety label 362990
Extent of delivery
• Hedge trimmer
• Hand guard
• Knife protection
• Operating manual
After unpacking, check the contents of the box
! That it is complete
! Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Assembly
Attach the hand guard with screws to the device prior to startup.
(Page 2, fig. A).
Symbols machine
Carefully read
operator’s
manual before
handling the
machine.
Observe instruc-
tions and safety
rules when
operating.
Shut off engine and
remove power cord
before performing
cleaning,
maintenance or
repair work.
Do not expose to
rain or
moistness.
When connecting
cable is damaged or
cut through
immediately pull out
the power plug.
Wear eye
protection.
Wear protection
gloves.
Electrical devices do not go into the domestic
rubbish. Give devices, accessories and packaging
to an ecofriendly recycling.
According to the European Directive 2002/96/EC on electrical
and electronic scrap, electrical devices that are no longer
serviceable must be separately collected and brought to a
facility for an environmentally compatible recycling.
Symbols used in the operating instructions
Threatened hazard or hazardous situation. Not
observing this instruction can lead to injuries or
cause damage to property.
L
Important information on proper handling. Not
observing this instruction can lead to faults in the
machine.
User information. This information helps you to
use all the functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Operating times
Before initiating the device please observe the provisions
pertaining to corresponding laws (regional provisions) for the
noise control.

Chat with your Atika HS 710/61 manual using AI

Get instant AI answers from your Atika HS 710/61 manual

Ask anything about the Atika HS 710/61. Answers come from this manual, with the pages they are based on.

HS 710/61 Maintenance Schedule

Regularly
Clean and oil all moving parts

Clean and oil all moving parts regularly to maintain functionality. Use environmentally friendly oil; never use grease.

Show in the manual (page 16)
Regularly
Clean ventilation slots

Clean or vacuum the ventilation slots regularly to ensure proper motor cooling.

Show in the manual (page 16)
Regularly
Check power cable

Regularly check the connection cable for damage. Replace damaged cables immediately using an authorized specialist.

Show in the manual (page 15)
Regularly
Check extension cables

Regularly inspect extension cables and replace them if they are damaged.

Show in the manual (page 15)
Before long-term storage
Thorough cleaning and oiling before storage

Perform a thorough cleaning and treat all movable parts with environmentally friendly oil before storing the device for a longer period.

Show in the manual (page 16)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend HS 710/61?

Yes No

Frequently Asked Questions

A

The electric hedge trimmer operates on a 230 V~ voltage with a frequency of 50 Hz. This standard voltage ensures compatibility with most household electrical outlets in Europe when used with the correct grounded socket.

Is this answer helpful?

A

No, this device is designed strictly for private use in house and hobby gardens. It is not intended for use in public facilities, parks, sports grounds, or in agriculture and silviculture. Commercial use invalidates the manufacturer's liability.

Is this answer helpful?

A

To prevent damage, remove all metallic objects like wires from the hedge before cutting. Do not force the machine against overly thick branches. Avoid using the trimmer in wet conditions to prevent rust. Store the product with the blade protection cover engaged.

Is this answer helpful?

A

The cutting gap is 22 mm, which means the device can effectively cut branches up to this thickness. Cutting thicker branches may damage the knife blades or cause internal motor issues.

Is this answer helpful?

A

Yes, safety regulations require specific cable cross-sections. You must use a cable with at least 1.5 mm² for lengths up to 25 meters. For lengths over 25 meters, a cable with 2.5 mm² cross-section is required for safety.

Is this answer helpful?

A

Some vibration is normal due to the motor and blade movement. However, excessive vibration may indicate blocked blades or missing lubrication. Always use warm working gloves to reduce vibration impact on your hands.

Is this answer helpful?

A

No, you should never clean the blades with water. This creates a high risk of corrosion and rust, which will degrade cutting performance. Clean the blades manually and apply environmentally friendly oil instead.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Robust motor with 1710 W power for efficient cutting of thick branches up to 22 mm.
  • Adjustable rear handle allows for ergonomic positioning to reduce user fatigue.
  • Double-sided blades enable forward, backward, and pendulum cutting motions.
  • Two-hand safety switch system prevents accidental activation during use.
  • Lightweight design around 3.3 kg makes it easier to handle for extended periods.
VS

Disadvantages

  • Electric corded power limits mobility and requires careful cable management.
  • High noise level up to 103 dB requires hearing protection for safety.
  • Stricterly limited to private garden use, not allowed for commercial applications.
  • Blades require regular sharpening and oiling to prevent overheating and corrosion.
  • Cannot operate in wet weather or rain due to electrical safety risks.
M: QW-35-FL

Product Specification

Type

Hedge Trimmer

Power

710W

Cutting Length

20.87 in

Cutting Capacity

0.87 in

Features

Auxiliary Handle

Weight

8.60 lbs

M: QW-35-FL

Product Description

Maintaining Your Garden with Atika Tools

A Powerful Solution for Homeowners

If you are looking to keep your hedges neat and manageable, the Atika HS 710/61 Electric Hedge Trimmer stands out as a reliable choice for domestic gardening enthusiasts. This powerful tool is designed specifically for private use in house and hobby gardens, ensuring you have the strength needed to tackle thick branches without the effort of manual pruning. When operating this equipment, it is highly recommended to familiarize yourself with the comprehensive Atika HS 710/61 Electric Hedge Trimmer Manual to ensure safe assembly and usage. Reading through these guidelines before starting will prevent accidents and extend the life of your machine significantly.

Technical Specifications and Performance

The device boasts a robust motor that delivers consistent power for efficient cutting. With a no-load speed of 1600 rpm, the blades move rapidly to slice through vegetation cleanly. The HS 710/61 features a blade length of 610 mm, allowing for precise cuts on medium-sized hedges. It can handle branches up to 22 mm in thickness, making it versatile for various shrub types. The double-sided cutting blades offer flexibility, enabling forward and backward motions as well as pendulum movements. The ergonomic design includes an adjustable rear handle with multiple positions, allowing users to find a comfortable angle for cutting from the top or sides. This adaptability ensures less fatigue during long gardening sessions.

Safety Features First

Safety is a top priority with this model. It includes a two-hand safety switch that prevents accidental activation. Both hands must be on the handles for the machine to run, which significantly reduces the risk of injury during operation. The unit also comes with essential protective gear attachments, such as handguards. However, users should always wear safety goggles and gloves when operating the machinery to protect against flying debris. Always check the manual to understand residual risks associated with vibration and noise. The guaranteed sound power level is noted, reminding users of the need for hearing protection during extended work sessions. It is strictly for private use and should not be used in public areas or under wet conditions to avoid electrical hazards.

Maintenance and Care

To ensure longevity, regular maintenance is crucial. You should clean the ventilation slots and lubricate all moving parts after each use. Never wash the blades with water, as this promotes corrosion and rust. The handles must remain dry and free from oil or grease to maintain a secure grip while working. Store the device in a dry place away from children, and always engage the knife protection cover when the tool is not in use. The machine requires a specific extension cable thickness depending on length to prevent voltage drop. By following these guidelines and referring to the official guide, you keep this trimmer in top condition for seasons to come. Proper sharpening of blades when dull is also necessary to prevent overheating and ensure clean cuts for healthy plant growth.

M: QW-35-FL

© Copyright 2026 Manual.ly