Manual.ly Logo

Atika BKS 38 A Manual

2.0 · 1 Ratings

PDF manual · 152 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 152

Loading...
89ea4c0ea0979307b7060d5b641e1e348aa2 page 1c
27
Checking the ignition spark
1. Remove the spark plug (24).
2. Firmly connect the spark plug connector (23).
3. Use an insulated pair of tongs to press the spark plug
against the engine body (away from the spark plug hole).
4. Put the ON/OFF switch to the position
.
5. Pull the cranking rope.
L If there is no spark visible between the electrodes, the
spark plug may be defective.
Chain catcher
Â
The chain catcher (30) prevents a broken or jumped off saw
chain from hitting the operator during sawing.
LCheck the chain catcher on a regular basis and replace
it if it is damaged.
Silencer / exhaust outlet
Â
Check the tight seat of the screws on the silencer (25) on a
regular basis
Î If they are loose, tighten them hand-tight with the engine
in cold condition.
Do not retighten the silencer screws when the engine is
hot.
L Clean the exhaust outlet on a regular basis
Adjusting the carburetor (idle speed)
The carburetor is factory-set to the correct idle speed so that
the correct fuel-air mixture is fed to the engine.
An incorrect carburetor adjustment results in severe
engine damages. Do not continue working with the
chain saw in such a condition.
In the cases below the carburetor (idle speed) has to be
corrected:
- Speed too high (saw chain continues to move in idle speed)
- Erratic running or lack of acceleration (idle speed too low)
- Adjustment to weather conditions and temperatures
LContact a specialist workshop and have the carburetor
adjustment done.
Cleaning
Clean the chain saw thouroughly after each application so that
the faultless function is kept.
B Clean the case with a soft brush or a dry cloth.
Water, solvents and polishing agents shall not be
applied.
B Â Make sure that the vent slots (32) of the cover (26)
and the engine's cooling fins (33) for engine cooling are free
and clean (risk of overheating).
B
If heavily contaminated, clean the chain saw using a
commercial chain cleaner.
B Â Clean the oil flow canal (19) with a clean cloth or a
brush.
B Â
Clean the brake strap (20) at the cover (13) using a
brush.
T
T
r
r
a
a
n
n
s
s
p
p
o
o
r
r
t
t
Before each transport:
− switch off device
− wait for stop of chain saw
− attach the scabbard on the guide bar
 Carry the product with the front handle. The guide bar
shall show to the rear side.
When transporting the product within a car put it in the boot
or on a separate loading area. Secure the chain saw against
tipping over, damages and fuel spillage.
S
S
t
t
o
o
r
r
a
a
g
g
e
e
Store unused equipment in a dry, locked place out of the
reach of children.
Always re-attach the guide bar guard (chain guard) when
storing the unit to prevent any injury by accidental contact.
To extend the service life of the saw and guarantee smooth
operation, before storing for a longer period:
B Operate the engine until the carburetor is empty.
B thoroughly clean the device.
B Empty the fuel tank completely.
B Empty the oil tank completely.
B C Dispose of remainders of fuel/saw chain oil according
to relevant regulations (environmentally compatible).
Tipp:
Some chain oils tend to encrustations after a longer
period. For this reason the oil system should be flushed
before a longer storing with a commercial chain saw
cleaner. Fill the cleaner up to the middle (appr. 50 ml)
into the empty oil tank. Close the tank. Operate the chain
saw without installed guide bar and chain until all of the
cleaner came out of the oil outlet of the chain saw.
B After cleaning, immerse the saw chain in an oil bath for a
short time and wrap it then with oiled paper.

Chat with your Atika BKS 38 A manual using AI

Get instant AI answers from your Atika BKS 38 A manual

Ask anything about the Atika BKS 38 A. Answers come from this manual, with the pages they are based on.

BKS 38 A Maintenance Schedule

Remind me when maintenance is due
Yearly
Check carburetor idle speed

Verify chain does not run at idle. Have adjustment done by a specialist workshop if needed.

Show in the manual (page 28)
Every 8 operating hours
Clean the air filter

Clean regularly to prevent starting problems and power loss. Wash in soapy water and dry before reinstalling.

Show in the manual (page 27)
Every 100 hours or yearly
Replace spark plug

Replace every 100 hours or once a year, whichever comes first, or if electrodes are damaged or dirty.

Show in the manual (page 27)
Every use
Check chain brake function

Test brake operation before each work start by pressing the front hand guard while the engine runs.

Show in the manual (page 25)
After each use
Clean the machine

Clean case with soft brush or dry cloth. Ensure vent slots and cooling fins are free of debris.

Show in the manual (page 28)
Every use
Check saw chain tension

Check tension before work, after initial steps, and regularly during operation every 10 minutes.

Show in the manual (page 24)
Every use
Check chain lubrication

Verify oil flow by pointing chain tip at paper. Clean oil channel if no track appears.

Show in the manual (page 24)
Regularly
Inspect guide bar and chain

Check for wear and damage. Turn guide bar after each sharpening and replace if damaged.

Show in the manual (page 27)
Regularly
Check chain wheel

Inspect teeth for wear or damage. Replace immediately if worn or damaged.

Show in the manual (page 27)
Regularly
Check fuel filter

Inspect regularly and clean or replace if heavily contaminated.

Show in the manual (page 27)
Regularly
Check silencer screws

Ensure screws are tight. Tighten only when engine is cold.

Show in the manual (page 28)
Regularly
Check chain catcher

Inspect regularly and replace if damaged to ensure safety.

Show in the manual (page 28)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend BKS 38 A?

Yes No
0
User Pic

Anna Schmidt

8 months ago

Is changing the chain on this tool really as cumbersome as reviews suggest? I am concerned about maintenance.

0
User Pic

Manual.ly

8 months ago

We appreciate your feedback. The tool is designed for quick adjustments and smaller tasks, which explains why some users find the full chain replacement slightly involved. For regular small works, it performs reliably without issue. We recommend watching our instructional video for tips to make the process smoother.

M: qwen/qwen3.5-flash-20260224
M: qwen/qwen3.5-flash-20260224

Frequently Asked Questions

A

Mix petrol and two stroke oil at a 40:1 ratio using the provided mixing can to ensure proper engine operation.

Is this answer helpful?

A

The guide bar length is 370 mm which is suitable for standard logging tasks.

Is this answer helpful?

A

It is 37.2 cm³ providing sufficient power for firewood cutting.

Is this answer helpful?

A

Yes, it has an integrated chain brake that activates upon kickback or manual trigger.

Is this answer helpful?

A

Clean it every eight operating hours or more often in dusty environments to prevent starting problems.

Is this answer helpful?

A

It weighs about 4.5 kg without the guide bar and chain attached.

Is this answer helpful?

A

No, only for wood. Do not use the saw on construction materials like concrete or plastics per safety guidelines.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Powerful 1.3 kW engine delivers consistent cutting speed for various wood types.
  • Lightweight design at 4.5 kg reduces operator fatigue during long usage sessions.
  • Integrated chain brake provides essential kickback protection for user safety.
  • Automatic chain lubrication system ensures continuous maintenance of the saw chain.
  • Complete kit includes guide bar, chain, and file for immediate assembly and use.
VS

Disadvantages

  • Requires manual mixing of petrol and two-stroke oil at 40:1 ratio for operation.
  • High noise level up to 114 dB decibels requires strict ear protection standards.
  • Significant hand-arm vibration requires regular breaks to prevent health issues.
  • Maintenance like air filter cleaning must be done every eight hours accurately.
  • Cannot be used indoors due to carbon monoxide risk from exhaust fumes.
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Chainsaw

Power

1.74 hp, 2.27 cu in

Guide Bar Length

15.75 in

Chain Speed

68.90 ft/s

Chain Pitch

3/8"

Chain Oil Tank

7.10 fl oz

Features

Additional handle, Vibration damping, Easy-start system (Primer), Automatic chain lubrication, Chain brake, Chain catcher

Vibration Level

37.73 ft/s^2

Fuel Tank Capacity

10.48 fl oz

Noise Level

114 dB(A)

Weight

11.46 lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Power and Precision with the Atika BKS 38 A

The Atika BKS 38 A Petrol Chainsaw represents a solid solution for woodland management and firewood preparation throughout the year. Engineered for efficiency, this machine features a powerful 1.3 kW engine with a displacement of 37.2 cm³. It delivers a maximum chain speed of 21 meters per second and a cutting length of 370 millimeters. Despite its industrial-grade power, the unit remains manageable at approximately 4.5 kilograms without the guide bar. This balance makes it easy to handle during extended outdoor operations without excessive physical fatigue, which is crucial for professional forestry tasks.

Safety First for Operators

Safety is paramount when operating any wood cutting machinery. The Atika BKS includes integrated chain brakes that protect the user during unexpected kickback events. The device requires specific personal protective equipment including eye guards, ear protection, and cut-resistant gloves. Always wear a hard hat and safety boots with steel toes. The documentation emphasizes keeping a safe distance from bystanders and avoiding work in poor weather conditions such as heavy rain or fog. Kickback risks are minimized by avoiding the tip of the guide bar and holding the saw with both hands firmly on the handles.

Performance and Maintenance Details

Proper maintenance ensures longevity and peak performance throughout the unit's lifecycle. The automatic chain lubrication system requires regular checks to prevent dry running and excessive wear. Users must mix petrol and two-stroke oil at a precise 40:1 ratio using a mixing can. The fuel tank holds 0.31 liters while the oil tank holds 0.21 liters. Cleaning the air filter every eight operating hours is recommended to prevent starting problems and power loss. The Atika BKS 38 A Petrol Chainsaw Manual provides detailed instructions for sharpening the chain and adjusting idle speed. Neglecting these steps can lead to costly engine damage or unsafe cutting conditions. This certification confirms the device meets European health and safety requirements.

Important Operational Considerations

Be aware of noise levels which can reach 114 decibels guaranteed. Vibration emissions are measured at 11.5 meters per second squared. Regular breaks are advised to prevent hand-arm vibration syndrome during intensive work. Fuel must be stored safely away from ignition sources in approved containers. This saw is best suited for outdoor wood cutting only. Do not use it on construction materials like concrete or plastics. Following the guidelines in the user documentation prevents damage and ensures operator safety. With correct care, this petrol chainsaw delivers consistent cutting performance for firewood and timber processing tasks efficiently over many years. The kit includes a guide bar, chain, and file for immediate use upon unboxing. Review the warranty declaration upon packing to understand coverage.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly