Manual.ly Logo

Atika BKS 38 A Manual

2.0 · 1 Ratings

PDF manual · 152 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 152

Loading...
89ea4c0ea0979307b7060d5b641e1e348aa2 page 19
24
Mixing
Ratio of mixture 40:1
Petrol Two-stroke engine oil
1 litre 0,025 litres
2 litres 0,050 litres
5 litres 0,125 litres
10 litres 0,250 litres
Measure the oil quantity accurately as a small deviation of it
has a large effect on the ratio of mixture in particular for
small fuel quantities.
Do not change the ratio of mixture. This will lead to more
residues of combustion, a higher fuel consumption, a
decrease of output or damages to the engine.
Mix petrol and oil in the supplied fuel mixing can (38).
Â
Fill first petrol up to the mark .
Then, fill oil up to the mark
.
Shake the fuel mixture.
• Fuels have only a limited shelf-life. Outdated fuels and fuel
mixtures may result in starting problems. Therefore, mix only
that quantity of fuel which you can use.
• Only store fuels in containers approved and identified for
this. Keep fuel containers in a dry and safe area.
• Make sure that fuel containers are kept out of the reach for
children.
C Make sure to dispose of fuel remainders and liquids
used for cleaning according to relevant regulations and in an
environmentally compatible manner.
Fuelling the chain saw
• Stop the engine and allow it to cool down.
• Wear protective gloves.
• Avoid eye and skin contact.
• Strictly follow the instructions under “Safe
handling with fuels”.
1. Clean the area around the filler neck. Contamination in the
tank may result in malfunction.
2. Â
Carefully open the tank cap (9) to allow possible
overpressure to relax.
3. Shake the container once more before pouring the fuel into
the tank.
4. Carefully fill the fuel mixture up to the lower edge of the filler
neck. Avoid spilling of fuel or oil. Clean the chain saw
immediately when you have spilled fuel or oil.
C Make sure that no fuel can come into the soil.
5. Carefully close the tank cap after fuelling and check that it
does not get loose during operation.
6. Check that there is no leakage on the tank cap and fuel
lines. If there are leaks this product may not be started.
7. Clean the tank cap and the area around it.
Go away at least three metres from the fuelling place to
start the chain saw.
S
S
t
t
a
a
r
r
t
t
-
-
u
u
p
p
You may not start to operate the machine until you
have read these operating instructions, observed all the
instructions given and installed the machine as described!
Check for every use:
- there is no damages at the machine.
- loose fastenings
Make sure that the ON/OFF switch, the throttle lock-out
switch, the throttle trigger and the chain brake properly work.
Observe the safety instruction in any case.
Chain brake
 The chain brake is a protective mechanism that is
triggered when the chain saw strikes backwards or
automatically by the front hand guard (3). The saw chain
stops immediately (< 0,1 sec.).
Checking of chain brake
Check the chain brake’s proper function before each work start.
• Start the engine, see “Starting the chain saw”.
• Hold the chain saw with both hands and allow the engine to
run.
Â
Use the back of your hand to press against the front
hand guard
.
The chain saw must stop immediately.
It is not allowed to use this chain saw without
properly working chain brake. Please contact the
manufacturer or the customer service point.
Before starting the chain saw
 Apply the chain brake. Push the front hand guard
forward.
Have a safe standing position.
Â
Place the chain saw on the ground in front of you, with
the guide bar and chain showing to the left.
Chain and guide bar must stand free.
Put the right foot tip in the rear handle (29) and hold the
front handle (4) with your left hand.
Starting with cold engine
 Put the ON/OFF switch (8) to .
Press the throttle lock-out switch (5) and operate the
throttle trigger (6) at the same time.
Fully pull out the choke lever (7)
and release the
throttle trigger.
Press several times on the priming pump (28) to pump
fuel into the carburetor.

Chat with your Atika BKS 38 A manual using AI

Get instant AI answers from your Atika BKS 38 A manual

Ask anything about the Atika BKS 38 A. Answers come from this manual, with the pages they are based on.

BKS 38 A Maintenance Schedule

Remind me when maintenance is due
Yearly
Check carburetor idle speed

Verify chain does not run at idle. Have adjustment done by a specialist workshop if needed.

Show in the manual (page 28)
Every 8 operating hours
Clean the air filter

Clean regularly to prevent starting problems and power loss. Wash in soapy water and dry before reinstalling.

Show in the manual (page 27)
Every 100 hours or yearly
Replace spark plug

Replace every 100 hours or once a year, whichever comes first, or if electrodes are damaged or dirty.

Show in the manual (page 27)
Every use
Check chain brake function

Test brake operation before each work start by pressing the front hand guard while the engine runs.

Show in the manual (page 25)
After each use
Clean the machine

Clean case with soft brush or dry cloth. Ensure vent slots and cooling fins are free of debris.

Show in the manual (page 28)
Every use
Check saw chain tension

Check tension before work, after initial steps, and regularly during operation every 10 minutes.

Show in the manual (page 24)
Every use
Check chain lubrication

Verify oil flow by pointing chain tip at paper. Clean oil channel if no track appears.

Show in the manual (page 24)
Regularly
Inspect guide bar and chain

Check for wear and damage. Turn guide bar after each sharpening and replace if damaged.

Show in the manual (page 27)
Regularly
Check chain wheel

Inspect teeth for wear or damage. Replace immediately if worn or damaged.

Show in the manual (page 27)
Regularly
Check fuel filter

Inspect regularly and clean or replace if heavily contaminated.

Show in the manual (page 27)
Regularly
Check silencer screws

Ensure screws are tight. Tighten only when engine is cold.

Show in the manual (page 28)
Regularly
Check chain catcher

Inspect regularly and replace if damaged to ensure safety.

Show in the manual (page 28)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend BKS 38 A?

Yes No
0
User Pic

Anna Schmidt

8 months ago

Is changing the chain on this tool really as cumbersome as reviews suggest? I am concerned about maintenance.

0
User Pic

Manual.ly

8 months ago

We appreciate your feedback. The tool is designed for quick adjustments and smaller tasks, which explains why some users find the full chain replacement slightly involved. For regular small works, it performs reliably without issue. We recommend watching our instructional video for tips to make the process smoother.

M: qwen/qwen3.5-flash-20260224
M: qwen/qwen3.5-flash-20260224

Frequently Asked Questions

A

Mix petrol and two stroke oil at a 40:1 ratio using the provided mixing can to ensure proper engine operation.

Is this answer helpful?

A

The guide bar length is 370 mm which is suitable for standard logging tasks.

Is this answer helpful?

A

It is 37.2 cm³ providing sufficient power for firewood cutting.

Is this answer helpful?

A

Yes, it has an integrated chain brake that activates upon kickback or manual trigger.

Is this answer helpful?

A

Clean it every eight operating hours or more often in dusty environments to prevent starting problems.

Is this answer helpful?

A

It weighs about 4.5 kg without the guide bar and chain attached.

Is this answer helpful?

A

No, only for wood. Do not use the saw on construction materials like concrete or plastics per safety guidelines.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Powerful 1.3 kW engine delivers consistent cutting speed for various wood types.
  • Lightweight design at 4.5 kg reduces operator fatigue during long usage sessions.
  • Integrated chain brake provides essential kickback protection for user safety.
  • Automatic chain lubrication system ensures continuous maintenance of the saw chain.
  • Complete kit includes guide bar, chain, and file for immediate assembly and use.
VS

Disadvantages

  • Requires manual mixing of petrol and two-stroke oil at 40:1 ratio for operation.
  • High noise level up to 114 dB decibels requires strict ear protection standards.
  • Significant hand-arm vibration requires regular breaks to prevent health issues.
  • Maintenance like air filter cleaning must be done every eight hours accurately.
  • Cannot be used indoors due to carbon monoxide risk from exhaust fumes.
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Chainsaw

Power

1.74 hp, 2.27 cu in

Guide Bar Length

15.75 in

Chain Speed

68.90 ft/s

Chain Pitch

3/8"

Chain Oil Tank

7.10 fl oz

Features

Additional handle, Vibration damping, Easy-start system (Primer), Automatic chain lubrication, Chain brake, Chain catcher

Vibration Level

37.73 ft/s^2

Fuel Tank Capacity

10.48 fl oz

Noise Level

114 dB(A)

Weight

11.46 lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Power and Precision with the Atika BKS 38 A

The Atika BKS 38 A Petrol Chainsaw represents a solid solution for woodland management and firewood preparation throughout the year. Engineered for efficiency, this machine features a powerful 1.3 kW engine with a displacement of 37.2 cm³. It delivers a maximum chain speed of 21 meters per second and a cutting length of 370 millimeters. Despite its industrial-grade power, the unit remains manageable at approximately 4.5 kilograms without the guide bar. This balance makes it easy to handle during extended outdoor operations without excessive physical fatigue, which is crucial for professional forestry tasks.

Safety First for Operators

Safety is paramount when operating any wood cutting machinery. The Atika BKS includes integrated chain brakes that protect the user during unexpected kickback events. The device requires specific personal protective equipment including eye guards, ear protection, and cut-resistant gloves. Always wear a hard hat and safety boots with steel toes. The documentation emphasizes keeping a safe distance from bystanders and avoiding work in poor weather conditions such as heavy rain or fog. Kickback risks are minimized by avoiding the tip of the guide bar and holding the saw with both hands firmly on the handles.

Performance and Maintenance Details

Proper maintenance ensures longevity and peak performance throughout the unit's lifecycle. The automatic chain lubrication system requires regular checks to prevent dry running and excessive wear. Users must mix petrol and two-stroke oil at a precise 40:1 ratio using a mixing can. The fuel tank holds 0.31 liters while the oil tank holds 0.21 liters. Cleaning the air filter every eight operating hours is recommended to prevent starting problems and power loss. The Atika BKS 38 A Petrol Chainsaw Manual provides detailed instructions for sharpening the chain and adjusting idle speed. Neglecting these steps can lead to costly engine damage or unsafe cutting conditions. This certification confirms the device meets European health and safety requirements.

Important Operational Considerations

Be aware of noise levels which can reach 114 decibels guaranteed. Vibration emissions are measured at 11.5 meters per second squared. Regular breaks are advised to prevent hand-arm vibration syndrome during intensive work. Fuel must be stored safely away from ignition sources in approved containers. This saw is best suited for outdoor wood cutting only. Do not use it on construction materials like concrete or plastics. Following the guidelines in the user documentation prevents damage and ensures operator safety. With correct care, this petrol chainsaw delivers consistent cutting performance for firewood and timber processing tasks efficiently over many years. The kit includes a guide bar, chain, and file for immediate use upon unboxing. Review the warranty declaration upon packing to understand coverage.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly