Manual.ly Logo

Atika BKS 38 A Manual

2.0 · 1 Ratings

PDF manual · 152 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 152

Loading...
89ea4c0ea0979307b7060d5b641e1e348aa2 page 18
23
Clamping of saw chain
Risk of injury!
Stop the engine and wear protective
gloves whenever working on the guide
bar and on the saw chain!
Â
Loosen the retaining nuts (14) by max. 1 turn.
Â
Slightly lift the guide bar tip and turn the chain stretching
screw (15) clock wisely until the correct chain tension is
reached.
Â
The saw chain is correctly stretched when it can be
lifted in the centre of the chain guide by appr. 3 – 4 mm.
Turn the chain stretching screw anti-clockwise when the
saw chain is stretched too much.
Check that the chain links are positioned correctly in the
guiding groove of the guide bar.
Re-tighten the locking nuts (14).
Check the saw chain tension:
B before start of work
B after the first steps
B during sawing regularly all 10 minutes
Only with a correct clamped saw chain and a sufficient
lubrication you can influence the durability.
L Please observe the following:
B a new saw chain must be rest retched more frequently.
B in case of heating of chain to operating temperature it
expands and needs to be reclamped.
After finishing the sawing works release tension of saw
chain as in case of cooling too high tensions would emerge
in the saw chain.
B if chain flackers or comes out of the guide clamp it again
immediately.
P
P
r
r
e
e
p
p
a
a
r
r
i
i
n
n
g
g
f
f
o
o
r
r
c
c
o
o
m
m
m
m
i
i
s
s
s
s
i
i
o
o
n
n
i
i
n
n
g
g
L The chain saw is supplied without saw chain oil and
fuel filling.
Fill the saw chain as described under "Chain lubrication" and
"Fuelling".
Chain lubrication
L Never operate the chain saw without lubrication. Any
use without chain saw oil may result in damage of the
chain saw and guide bar.
The durability and cutting power of the chain depends on the
optimal lubrication. During operation the saw chain is
automatically wetted with oil.
Filling up saw chain oil
Stop the engine and wear protective
gloves.
Avoid eye and skin contact.
Â
Put the chain saw on a suitable base and unscrew the oil
tank lock (11).
C Fill the oil tank with bio-degradable chain saw
adhering oil (order no. 400144). For easier filling use a
funnel.
When filling observe that no dirt reaches the oil tank.
Screw on the oil tank lock again.
Never use recycled oil or used oil. The guarantee expires
when using oil which is not allowed for chain saws.
Checking the chain lubrication
Never operate the chain saw without functioning chain
lubrication.
Check the function of the automatic chain lubrication by
switching on the chain saw and holding it with the pike in
direction of a carton or paper on the ground.
Do not get in contact with the ground with the chain. Keep a
safe distance of 20 cm.
If an increasing oil track is caused when checking it the oil
automatic works faultless. If there is no oil track despite full oil
tank:
Â
Clean the oil flow channel (19).
B If this is not successful please contact the customer
service.
Â
Adjust the chain lubrication:
See also the instructions under "Maintenance /
cleaning: Adjusting the chain lubrication".
Fuelling
Utmost care is required when handling fuel
and oil. Do not smoke. Keep away open flames
(risk of explosion).
This product is operated by a mixture from regular
petrol (unleaded) and two-stroke engine oil.
Petrol: Octane number at least 91 ROZ unleaded
Do not fill in leaded petrol, diesel or other non-approved
fuels.
Do not use petrol having a smaller octance number than 91
ROZ. This may lead to severe engine damages due to
increased engine temperatures.
If you frequently operate the product at high speeds, you
should use petrol with a higher octane number.
CThe use of unleaded petrol is recommended for envi-
ronment protection reasons.
Two-stroke engine oil:
acc. to JASO FC or ISO EGD specifications
Do only use two-stroke engine oil for air-cooled engines.

Chat with your Atika BKS 38 A manual using AI

Get instant AI answers from your Atika BKS 38 A manual

Ask anything about the Atika BKS 38 A. Answers come from this manual, with the pages they are based on.

BKS 38 A Maintenance Schedule

Remind me when maintenance is due
Yearly
Check carburetor idle speed

Verify chain does not run at idle. Have adjustment done by a specialist workshop if needed.

Show in the manual (page 28)
Every 8 operating hours
Clean the air filter

Clean regularly to prevent starting problems and power loss. Wash in soapy water and dry before reinstalling.

Show in the manual (page 27)
Every 100 hours or yearly
Replace spark plug

Replace every 100 hours or once a year, whichever comes first, or if electrodes are damaged or dirty.

Show in the manual (page 27)
Every use
Check chain brake function

Test brake operation before each work start by pressing the front hand guard while the engine runs.

Show in the manual (page 25)
After each use
Clean the machine

Clean case with soft brush or dry cloth. Ensure vent slots and cooling fins are free of debris.

Show in the manual (page 28)
Every use
Check saw chain tension

Check tension before work, after initial steps, and regularly during operation every 10 minutes.

Show in the manual (page 24)
Every use
Check chain lubrication

Verify oil flow by pointing chain tip at paper. Clean oil channel if no track appears.

Show in the manual (page 24)
Regularly
Inspect guide bar and chain

Check for wear and damage. Turn guide bar after each sharpening and replace if damaged.

Show in the manual (page 27)
Regularly
Check chain wheel

Inspect teeth for wear or damage. Replace immediately if worn or damaged.

Show in the manual (page 27)
Regularly
Check fuel filter

Inspect regularly and clean or replace if heavily contaminated.

Show in the manual (page 27)
Regularly
Check silencer screws

Ensure screws are tight. Tighten only when engine is cold.

Show in the manual (page 28)
Regularly
Check chain catcher

Inspect regularly and replace if damaged to ensure safety.

Show in the manual (page 28)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend BKS 38 A?

Yes No
0
User Pic

Anna Schmidt

8 months ago

Is changing the chain on this tool really as cumbersome as reviews suggest? I am concerned about maintenance.

0
User Pic

Manual.ly

8 months ago

We appreciate your feedback. The tool is designed for quick adjustments and smaller tasks, which explains why some users find the full chain replacement slightly involved. For regular small works, it performs reliably without issue. We recommend watching our instructional video for tips to make the process smoother.

M: qwen/qwen3.5-flash-20260224
M: qwen/qwen3.5-flash-20260224

Frequently Asked Questions

A

Mix petrol and two stroke oil at a 40:1 ratio using the provided mixing can to ensure proper engine operation.

Is this answer helpful?

A

The guide bar length is 370 mm which is suitable for standard logging tasks.

Is this answer helpful?

A

It is 37.2 cm³ providing sufficient power for firewood cutting.

Is this answer helpful?

A

Yes, it has an integrated chain brake that activates upon kickback or manual trigger.

Is this answer helpful?

A

Clean it every eight operating hours or more often in dusty environments to prevent starting problems.

Is this answer helpful?

A

It weighs about 4.5 kg without the guide bar and chain attached.

Is this answer helpful?

A

No, only for wood. Do not use the saw on construction materials like concrete or plastics per safety guidelines.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Powerful 1.3 kW engine delivers consistent cutting speed for various wood types.
  • Lightweight design at 4.5 kg reduces operator fatigue during long usage sessions.
  • Integrated chain brake provides essential kickback protection for user safety.
  • Automatic chain lubrication system ensures continuous maintenance of the saw chain.
  • Complete kit includes guide bar, chain, and file for immediate assembly and use.
VS

Disadvantages

  • Requires manual mixing of petrol and two-stroke oil at 40:1 ratio for operation.
  • High noise level up to 114 dB decibels requires strict ear protection standards.
  • Significant hand-arm vibration requires regular breaks to prevent health issues.
  • Maintenance like air filter cleaning must be done every eight hours accurately.
  • Cannot be used indoors due to carbon monoxide risk from exhaust fumes.
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Chainsaw

Power

1.74 hp, 2.27 cu in

Guide Bar Length

15.75 in

Chain Speed

68.90 ft/s

Chain Pitch

3/8"

Chain Oil Tank

7.10 fl oz

Features

Additional handle, Vibration damping, Easy-start system (Primer), Automatic chain lubrication, Chain brake, Chain catcher

Vibration Level

37.73 ft/s^2

Fuel Tank Capacity

10.48 fl oz

Noise Level

114 dB(A)

Weight

11.46 lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Power and Precision with the Atika BKS 38 A

The Atika BKS 38 A Petrol Chainsaw represents a solid solution for woodland management and firewood preparation throughout the year. Engineered for efficiency, this machine features a powerful 1.3 kW engine with a displacement of 37.2 cm³. It delivers a maximum chain speed of 21 meters per second and a cutting length of 370 millimeters. Despite its industrial-grade power, the unit remains manageable at approximately 4.5 kilograms without the guide bar. This balance makes it easy to handle during extended outdoor operations without excessive physical fatigue, which is crucial for professional forestry tasks.

Safety First for Operators

Safety is paramount when operating any wood cutting machinery. The Atika BKS includes integrated chain brakes that protect the user during unexpected kickback events. The device requires specific personal protective equipment including eye guards, ear protection, and cut-resistant gloves. Always wear a hard hat and safety boots with steel toes. The documentation emphasizes keeping a safe distance from bystanders and avoiding work in poor weather conditions such as heavy rain or fog. Kickback risks are minimized by avoiding the tip of the guide bar and holding the saw with both hands firmly on the handles.

Performance and Maintenance Details

Proper maintenance ensures longevity and peak performance throughout the unit's lifecycle. The automatic chain lubrication system requires regular checks to prevent dry running and excessive wear. Users must mix petrol and two-stroke oil at a precise 40:1 ratio using a mixing can. The fuel tank holds 0.31 liters while the oil tank holds 0.21 liters. Cleaning the air filter every eight operating hours is recommended to prevent starting problems and power loss. The Atika BKS 38 A Petrol Chainsaw Manual provides detailed instructions for sharpening the chain and adjusting idle speed. Neglecting these steps can lead to costly engine damage or unsafe cutting conditions. This certification confirms the device meets European health and safety requirements.

Important Operational Considerations

Be aware of noise levels which can reach 114 decibels guaranteed. Vibration emissions are measured at 11.5 meters per second squared. Regular breaks are advised to prevent hand-arm vibration syndrome during intensive work. Fuel must be stored safely away from ignition sources in approved containers. This saw is best suited for outdoor wood cutting only. Do not use it on construction materials like concrete or plastics. Following the guidelines in the user documentation prevents damage and ensures operator safety. With correct care, this petrol chainsaw delivers consistent cutting performance for firewood and timber processing tasks efficiently over many years. The kit includes a guide bar, chain, and file for immediate use upon unboxing. Review the warranty declaration upon packing to understand coverage.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly