Manual.ly Logo

AG Neovo QX-28 Manual

0.0 · 0 Ratings

PDF manual · 61 Pages

English

M: OA-GPT-54-NAN
page

/ 61

Loading...
60deb1b78b3e74048a4b7cfd91b346cd372b page 34
49
ADJUSTING THE LCD DISPLAY
Item Function Operation Range
NETWORK
SETTING
Congures network settings.
• NET MODE – Sets the network
mode to DHCP or STATIC IP
depending on the network type.
DHCP: Obtains connection
parameters automatically from
the network.
STATIC IP: Network parameters,
such as IP ADDRESS, SUBNET
MASK, GATEWAY, PRIMARY
DNS, and SECONDARY DNS
need to be entered manually.
To modify IP addres, subnet
mask, gateway, primary DNS,
and secondary DNS:
i) Press the
/ button on the
control panel or the remote
control to select the submenu
item.
ii) Press the
button on the
control panel or the SET button
on the remote control to enter
the adjustment mode.
iii) Press the necessary number
button on the remote control
directly or press the
/
button on the control panel or
the remote control to enter the
number.
iv) Press the
/ button on the
control panel or the remote
control to move to the next
number that needs to be set.
• WAKE ON LAN – Enables or
disables turning on the dipslay
over network.
• MONITOR NAME – Sets a
monitor name.
a) Press the
button on the
control panel or the SET
button on the remote control
to open the NETWORK
SETTING submenu.
b) Press the
/ button
on the control panel or the
remote control to select the
submenu items.
c) Press the
button on the
control panel or the SET
button on the remote control
to enter the adjustment
mode.
d) Press the
/ button on
the control panel or the
remote control to select the
setting or adjust the value.
N/A

Chat with your AG Neovo QX-28 manual using AI

Get instant AI answers from your AG Neovo QX-28 manual

Ask anything about the AG Neovo QX-28. Answers come from this manual, with the pages they are based on.

QX-28 Maintenance Schedule

When needed
Clean the front panel and cabinet

Disconnect power before cleaning. Wipe with a soft dry cloth or one dampened with mild detergent solution; do not use solvents.

Show in the manual (page 52)
When needed
Clean the remote control

Wipe with a dry cloth if wet; do not allow water to splash on it and avoid strong shock or heat.

Show in the manual (page 20)
When needed
Check batteries in remote control

Remove dead batteries immediately to prevent leakage; remove batteries if not used for a long period.

Show in the manual (page 20)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend QX-28?

Yes No

Frequently Asked Questions

A

It combines 4K resolution, multiple input options, multi-window viewing, and tools like anti-burn-in and scheduling. That mix makes it useful for office work, monitoring, signage, and mixed-source setups.

Is this answer helpful?

A

It supports VGA, DVI-D, HDMI, DisplayPort, audio input, USB for firmware updates, RS232, and RJ-45 network control. This gives it broad compatibility with both older and newer equipment.

Is this answer helpful?

A

Yes. It supports both PIP and PBP modes, including multiple side-by-side window layouts. This is helpful when you need to compare sources or keep one feed visible while using another.

Is this answer helpful?

A

Yes. The QX-28 can be used in portrait mode and also supports VESA wall mounting. That makes it flexible for signage, narrow spaces, and custom installation needs.

Is this answer helpful?

A

It includes modes such as Standard, Text, Eco, CCTV, Signage-Graphics, and Signage-Video. These presets help tune the image for reading, energy saving, surveillance, or presentation use.

Is this answer helpful?

A

The display includes anti-burn-in features, and the manual recommends using screen savers, lowering brightness, and turning the screen off when not in use. These steps help reduce static-image retention.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • 28-inch UHD 3840 x 2160 panel delivers crisp detail for text, graphics, and split-screen work.
  • Wide connectivity includes VGA, DVI, HDMI 2.0, DisplayPort 1.2a, RS232, RJ-45, and USB update support.
  • PIP/PBP multi-window modes make it easy to monitor multiple sources at once.
  • Useful display controls such as blue light filter, auto brightness, anti-burn-in, and scheduling improve long-term use.
VS

Disadvantages

  • Uses an external power adapter, which adds one more component and extra cable management.
  • 300 cd/m² brightness is good indoors, but not especially strong for very bright environments.
  • QX-28 has a more limited tilt range than smaller models, so ergonomic adjustment is narrower.
  • Advanced features can require menu navigation and may vary depending on the active input source.
M: OA-GPT-54-NAN

Product Specification

Function

Monitor (stationary)

Diagonal

28" (71.1cm)

Resolution

3840x2160 (4K UHD), 16:9, 157ppi

Panel

TN

Backlight

LED

Brightness

300cd/m² (typical)

Contrast

1,000:1 (static)

Response Time

3ms (GtG)

Refresh Rate

60Hz (3840x2160)

Signal Frequency

28-160kHz (H) / 45-85Hz (V)

Connections

1x VGA, 1x HDMI 2.0, 1x DisplayPort 1.2a, 1x DVI, 1x USB-A (Service Port), 1x 3.5mm Jack (Line-Out), 1x 3.5mm Jack (Line-In), 1x RJ-45 1Gb LAN, 1x DC-In Barrel Jack (Power Connection)

Form

straight (flat)

Viewing Angle

170°/160°

Coating

non-glare (matte), Protective Glass

Color Depth

10bit (1.07 Billion Colors)

FRC

yes (8bit+2bit)

Speakers

Speakers (2x 3W)

Operation

mechanical buttons, remote control included

Ergonomics

with stand, height adjustable (3.94in), Pivot (+90°), swivel (+45°), tilt (+18°/-0°)

VESA

100x100/100x200 (occupied)

Power Consumption

60W (typical)

Energy Efficiency SDR (A to G)

29kWh/1000h (G)

Special Features

Security Lock (Kensington Security Slot), Light Sensor

Screen-to-Body Ratio

Inf% (calculated)

Dimensions

26.81x21.30x10.63in (WxHxD) with stand compressed

Color

black (display frame) / black (lower bezel) / black (stand)

Weight

29.32lb (with stand)

Power Supply

external

Warranty

three years

USB Nomenclature

Link

M: OA-GPT-54-NAN

Product Description

AG Neovo QX-28 28" Manual: A Practical 4K Display for Flexible Workspaces

Based on the AG Neovo QX-28, 28" Manual, this display comes across as a thoughtful choice for people who need more than a basic monitor. The QX-28 combines a 28-inch UHD panel with a professional feature set, making it a strong fit for office setups, control desks, signage tasks, and other environments where image clarity and reliability matter.

What immediately stands out is its balance of modern and legacy connectivity. With VGA, DVI, HDMI 2.0, DisplayPort 1.2a, audio input, RS232, RJ-45 network control, and USB support for firmware updates, the QX-28 is ready for a wide range of devices. That flexibility makes integration easier whether you are upgrading an older installation or building a newer digital workflow from scratch.

The viewing experience is equally versatile. The QX-28 supports picture presets such as Standard, Text, Eco, CCTV, Signage-Graphics, and Signage-Video, helping the screen adapt to different content types without much effort. Features like auto brightness, blue light filtering, overdrive, and anti-burn-in protection show that AG Neovo designed this model with long-hour use in mind. For users who keep static content on screen, those safeguards are especially valuable.

Another highlight is multi-window support. PIP and PBP modes let you view more than one source at the same time, which is useful for monitoring systems, presentations, or mixed-content workstations. Add in portrait mounting support, VESA compatibility, scheduling, and OSD-based network settings, and the QX-28 becomes a display that can do far more than simply show an image.

Why It Works Well

The AG Neovo QX-28 feels built for practicality. It offers the sharpness of 4K resolution, the convenience of multiple input options, and the control features needed in professional spaces. Its 300 cd/m² brightness is suited to indoor use, while the included remote control, built-in speakers, and adjustable stand add everyday convenience.

For buyers who want a dependable 28-inch display with a professional edge, the QX-28 is an appealing option. It is not overly complicated, yet it provides enough depth to support demanding setups and mixed usage scenarios.

Notes

  • Best suited for business, signage, monitoring, and multi-source setups.
  • 4K performance is available through HDMI or DisplayPort with the proper cable.
  • Use screen protection tools for static content to reduce burn-in risk.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly