Zipper ZI-STM350C Manual
PDF manual · 49 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Zipper ZI-STM350C manual using AI
Get instant AI answers from your Zipper ZI-STM350C manual
Ask anything about the Zipper ZI-STM350C. Answers come from this manual, with the pages they are based on.
ZI-STM350C Maintenance Schedule
Remove the rubber bung and lift the opposite side of the machine to drain dirty water after each operation.
Clean the water pump with clear water to remove stone dust sediment. Failure to do so voids warranty.
Remove dust and dirt using a soft scrubber or clean cloth. Do not use solvents; use only water.
Treat non-lacquered machine parts with an anti-corrosion agent to prevent rust.
Oil all connection points and moving joints to ensure smooth operation.
Check for wear on the diamond blade and flanges. Replace cracked or deformed blades immediately.
Ask a Question
Do you recommend ZI-STM350C?
Yes NoFrequently Asked Questions
It cuts marble, granite, concrete, ceramic, and tiles using suitable diamond blades as specified in the manual.
Is this answer helpful?
Yes, use only in wet operation to avoid dust hazard and dust damage to the machine and operator.
Is this answer helpful?
2 years for hobby, 1 year for professional use starting from the date of purchase by the final consumer.
Is this answer helpful?
Flush with clean water after every use to prevent clogging from stone dust sediment buildup.
Is this answer helpful?
Yes, it supports cutting angles from 90 to 45 degrees by loosening the angle fixing lever.
Is this answer helpful?
Pre-assembled but feet and fences need setting and requires two people due to weight.
Is this answer helpful?
Replace cracked blades immediately for safety and ensure the new one matches the machine speed rating.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Powerful 3000W motor ensures efficient cutting of hard materials like granite and concrete.
- Wet cutting system significantly reduces dust hazards and protects the blade life.
- Adjustable cutting angles up to 45 degrees allow for precise miter cuts.
- Robust stand included provides necessary stability during heavy duty operations.
- CE compliant design meets EC directivess for safety and health requirements.
Disadvantages
- Hefty weight of 72 to 88 kg makes transport and setup difficult for one person.
- Requires water setup and drainage for every single cut operation session.
- Only one year warranty for professional use compared to two years for hobby.
- Standard wear parts like blades are not covered by the warranty period.
- Risk of kickback exists if guides are not used properly during cutting.
Product Specification
Type
Construction Cut-off Saw
Power
3000W (230V)
No-load Speed
2800 RPM
Blade Diameter
13.78 inches
Cutting Depth
4.13 inches (Cutting depth at 0 degrees), 2.83 inches (Cutting depth at 45 degrees inclination)
Bevel Angle
0-45 degrees
Arbor Size
1.18 inches
Features
Fence, Wet Cutting Function, Bevel Function
Weight
163.14 lbs
Package Contents
Stand
Product Description
Professional Stone Cutting Solutions
Welcome to the ultimate guide for the Zipper ZI-STM350C Electric Construction Cut-Off Saw with Stand Manual. This powerful tool is designed for precision cutting tasks in construction and stoneworking environments. The machine features a robust 3000-watt motor capable of reaching high speeds, ensuring efficient cuts through hard materials like granite, marble, and concrete. It represents a reliable choice for contractors requiring durability.
Performance and Capabilities
With a 350-millimeter diamond blade, this saw handles cutting depths up to 120mm at a 90-degree angle. The maximum cutting length reaches 680mm, making it suitable for various stone tiles and concrete projects. It operates on standard 230-volt power at 50Hz. The water tank holds 37.8 liters, providing ample coolant for the blade during extended sessions. Users can adjust the cutting angle between 0 to 45 degrees for versatile miter cuts. The sliding table measures 535x430mm.
Safety First Guidelines
Safety is paramount during operation according to the Zipper ZI-STM350C Electric Construction Cut-Off Saw with Stand Manual. The system emphasizes wet cutting processes to avoid dust hazards and protect the blade. Operators must wear protective gear including ear protection, safety glasses, and masks. The machine includes clear safety signs and requires grounding to a 230V Schuko socket. Avoid using the saw in rain or damp conditions. Always unplug the tool before maintenance.
Assembly and Operation
The unit arrives pre-assembled but requires setup of the table feet and fences. Two people are needed to move the 72 to 88 kg weight safely. During operation, ensure the water valve is open and the blade spins freely. Feed material slowly to prevent motor overload. Keep the workspace clean to avoid kickback.
Maintenance and Warranty
Regular maintenance prevents costly damage. Clean the water basin after every use and check the blade tension. The warranty offers 2 years for hobby use and 1 year for professional use. Always use original spare parts to maintain validity. This ensures longevity and safety on your job site.
Technical Specifications
The device lists a voltage of 230V and a motor power of 3000 Watts. The idle run speed is 2800 RPM. The machine dimensions are 1150x520x1210mm. Sound pressure level is 72 dB.
Detailed Safety Instructions
Read the entire manual before starting. Never force the motor or let it stop cutting. Replace cracked blades immediately. Only use extension cables rated for outdoor use with a minimum 1.5mm squared cross-section. Ensure children stay away.
Warranty Terms
Repair or replacement by discretion of the company. Claims require dealer contact and original invoices. Wear parts are not covered. Damages from misuse void the warranty.
Important Notes
This model has an IP54 protection class for dust and splash resistance. The water pump must be flushed regularly to prevent sediment buildup. Failure to maintain the pump may void the warranty. Ensure the blade rotation matches the machine speed rating. Always keep the work surface free of tools. Replace cracked blades immediately. Check all cables for wear before plugging in. The tool comes with assembly tools and a water hose. Always store the manual with the machine for future reference.
Search for 67,706 Manuals online
Type-in Brand or Model