Manual.ly Logo

Zipper ZI-STB16T Manual

0.0 · 0 Ratings

PDF manual · 49 Pages

English

M: QW-35-FL
page

/ 49

Loading...
df8458616ac26a1f7c97dcf5990e5c9e885b page 1d
TROUBLE SHOOTING
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 29
ZI-STB16T
NOTIC E
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
14.1 Maintenance plan
After each workshift:
Apply a thin layer of oil on the column and the table
Remove drill cuttings and metal chips
After 50 hours of operation
Apply some fat on the angle drift
14.2 Cleaning
After each workshift the machine has to be cleaned. Remove chips etc. with a suitable tool. Do not
remove them by hand (cutting injury!). Remove dust as well.
NOTIC E
The usage of certain solutions containing ingredients damaging metal surfaces as
well as the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild detergent
14.3 Disposal
Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local dealer
for a replacement unit, the latter is obliged to exchange your old.
15 TROUBLE SHOOTING
BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, DISCONNECT THE
MACHINE FROM THE POWER SUPPLY.
Trouble
Possible cause
Solution
Motor does not run
Incorrect power supply
Let it be checked by a trained
person
Switch defect
Change
Motor defect
Change
Safety switch activated
Check the belt cover or
spindle guard (open?).
Loud noice when running
Incorrect belt tension
Adjust belt tension (1cm rule)
Drill runs erratically
Drill chuck not assembled
correctly to arbour or one of them
is dirty
Check and adjust.
Drill chuck jaws worn or damaged
Change drill chucj
Spindle or boring is worn
Check and replace if
nesessary
Drill is hot and smokes
Too fast speed for material being
drilled
Reduce speed use lubricants
Motor runs but no rotation
or weak drilling power
Belt tension too low
Pulley belt diry, slippery
Tighten
Clean
MANY POTENTIAL SOURCES OF ERROR CAN BE CLEARED BY THE EXPERTLY CONNECTION TO
THE ELECTRICITY GRID.
NOTIC E
Should you in necessary repairs not able to properly to perform or you
have not the prescribed training for it always attract a workshop to fix the
problem.

Chat with your Zipper ZI-STB16T manual using AI

Get instant AI answers from your Zipper ZI-STB16T manual

Ask anything about the Zipper ZI-STB16T. Answers come from this manual, with the pages they are based on.

ZI-STB16T Maintenance Schedule

After each workshift
Oil column and table

Apply a thin layer of oil on the column and the table to prevent corrosion and ensure smooth operation.

Show in the manual (page 29)
After each workshift
Remove chips and dust

Clean the machine thoroughly after every use. Remove drill cuttings, metal chips, and dust using suitable tools, not by hand.

Show in the manual (page 29)
Every 50 hours
Grease the angle drift

Apply grease (fat) to the angle drift (taper shank) to facilitate easy removal and prevent seizing.

Show in the manual (page 29)
Every 100 hours
Lubricate connecting parts

Lubricate all moving connecting parts with oil or grease. Clean off swarfs and dust with a brush before applying lubricant.

Show in the manual (page 28)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend ZI-STB16T?

Yes No

Frequently Asked Questions

A

This drill press is designed to drill into metal, wood, and plastic. It uses a B16 chuck with a capacity of 1.5 to 16 mm. Always select the appropriate drill bit for the specific material being worked on.

Is this answer helpful?

A

No, the machine is not intended for outdoor operation. It should only be used indoors in environments where humidity does not exceed 70% and temperatures range between 5°C and 40°C to prevent electrical hazards.

Is this answer helpful?

A

Speed is changed by adjusting the V-belts. Open the gear cover, loosen the motor tension knobs, move the motor to release tension, reposition the belts on the desired pulley combination, and then retighten the motor to achieve correct tension.

Is this answer helpful?

A

The spindle stroke is 60 mm. You can set the exact drilling depth using the depth stop with a scale, allowing for precise control over how deep the drill bit penetrates the material.

Is this answer helpful?

A

Absolutely not. Operating the machine with gloves is strictly forbidden as they can get caught in rotating parts, leading to severe injuries. Always keep hands free and away from the drill head.

Is this answer helpful?

A

The warranty period is 2 years for amateur use and 1 year for professional use. This covers mechanical and electrical components but excludes wear parts and damage caused by misuse or unauthorized repairs.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Powerful 630W motor handles diverse materials efficiently
  • Variable speed range from 420 to 2700 RPM for precise control
  • Comprehensive safety features including emergency stop and guard sensors
  • Stable construction with tilting table for versatile angle drilling
  • Easy assembly with clear instructions and included hardware
VS

Disadvantages

  • Requires grounding via a qualified electrician for safe operation
  • Heavy weight of 30 kg makes relocation difficult without assistance
  • Noisy operation may require hearing protection for extended use
  • Limited to indoor use due to moisture sensitivity
  • Optional vice must be purchased separately for clamping workpieces
M: QW-35-FL

Product Specification

Power

630W (230V)

No-load speed

420-2700 rpm

Chuck capacity

1.5-16mm keyless chuck

Features

Multi-speed (12 levels), depth stop

Dimensions (HxWxD)

33.1x11.6x18.7in

Weight

66.14 lbs

M: QW-35-FL

Product Description

The Zipper ZI-STB16T Electric Table Drill Press: A Versatile Workshop Essential

The Zipper ZI-STB16T Electric Table Drill Press stands as a robust and reliable tool designed for both hobbyists and professionals who demand precision in their woodworking, metalworking, and plastic drilling projects. This machine combines durability with user-friendly features, making it an ideal addition to any workshop setting. With a powerful 630-watt motor capable of handling various materials, the ZI-STB16T ensures efficient performance across a wide range of tasks.

Designed with safety as a top priority, this drill press includes essential protective features such as an emergency stop switch and automatic shutdown mechanisms when guards are opened. The variable speed control allows operators to adjust the spindle rotation from 420 to 2700 RPM, ensuring optimal cutting speeds for different material densities. Whether you are drilling small holes in soft wood or tackling harder metals, the adjustable belt system provides the necessary torque and speed versatility.

Assembly is straightforward, guided by clear instructions included with the unit. The sturdy baseplate and column provide a stable foundation, while the tilting table offers flexibility for angled drilling up to 45 degrees. The depth stop mechanism ensures consistent hole depths, which is crucial for repetitive tasks. Additionally, the inclusion of a chuck guard and proper locking handles enhances operational safety, protecting users from rotating parts and flying debris.

Maintenance is minimal yet critical for longevity. Regular cleaning of chips and dust, along with periodic lubrication of moving parts every 100 hours, keeps the machine running smoothly. The manufacturer recommends using only original spare parts to maintain warranty validity and ensure perfect fitment. For those seeking a dependable drill press that balances power, safety, and ease of use, the Zipper ZI-STB16T delivers exceptional value and performance.

Important Notes

  • Always wear eye protection and avoid loose clothing during operation.
  • Ensure the machine is securely anchored to prevent tipping.
  • Use appropriate extension cords based on length requirements to prevent voltage drop.
M: QW-35-FL

© Copyright 2026 Manual.ly