Manual.ly Logo

Zipper ZI-STB16T Manual

0.0 · 0 Ratings

PDF manual · 49 Pages

English

M: QW-35-FL
page

/ 49

Loading...
df8458616ac26a1f7c97dcf5990e5c9e885b page 1c
MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 28
ZI-STB16T
Adjusting the Drilling Bench (Height, tilt angle)
1. Release the locking handle
2. Rotate the height crank clockwise or
counter clockwise to desired height.
3. Pivot the drilling bench to the desired
position
4. Fasten the drilling bench again with
the locking handle.
5. You can also adjust the tilt angle of
the drilling bench. To do this, release
the retaining screw under the drilling
bench with an open end wrench
SW19 (not scope of delivery). Tilt the
drilling bench as described to the
right or left up to a max. of 45° and
secure the drilling bench again with
the retaining screw.
Setting drilling depth:
Adjust the depth stop to desired depth.
The depth is shown on the scale.
Changing the drill:
Fold the drill chuck guard up.
Release the retaining jaws of the drill chuck with the drill chuck key.
Remove the bit.
Insert a new bit.
Tighten the retaining jaws of the drill chuck with the drill chuck key.
Check that the bit is centred.
Fold the drill chuck guard down again.
Attach the drill chuck key back to the key holder.
Using a quick chuck:
Open the keyless chuck by turning in against rotation direction A and holding ring B until the
drill can be inserted.
Insert the drill.
Firmly tighten the collar of the keyless chuck by hand in rotation direction A and holding ring
B.
This automatically locks the drill chuck.
14 MAINTENANCE
ATTEN TION
Perform all maintenance machine settings with the machine being
disconnected from the power supply!
Serious injury due to unintentional or automatic activation of the machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Before first operation as well as later on every 100 operation hours you should lubricate all connecting
parts (if required, remove beforehand with a brush all swarfs and dust).
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
Store the machine in a closed, dry location.

Chat with your Zipper ZI-STB16T manual using AI

Get instant AI answers from your Zipper ZI-STB16T manual

Ask anything about the Zipper ZI-STB16T. Answers come from this manual, with the pages they are based on.

ZI-STB16T Maintenance Schedule

After each workshift
Oil column and table

Apply a thin layer of oil on the column and the table to prevent corrosion and ensure smooth operation.

Show in the manual (page 29)
After each workshift
Remove chips and dust

Clean the machine thoroughly after every use. Remove drill cuttings, metal chips, and dust using suitable tools, not by hand.

Show in the manual (page 29)
Every 50 hours
Grease the angle drift

Apply grease (fat) to the angle drift (taper shank) to facilitate easy removal and prevent seizing.

Show in the manual (page 29)
Every 100 hours
Lubricate connecting parts

Lubricate all moving connecting parts with oil or grease. Clean off swarfs and dust with a brush before applying lubricant.

Show in the manual (page 28)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend ZI-STB16T?

Yes No

Frequently Asked Questions

A

This drill press is designed to drill into metal, wood, and plastic. It uses a B16 chuck with a capacity of 1.5 to 16 mm. Always select the appropriate drill bit for the specific material being worked on.

Is this answer helpful?

A

No, the machine is not intended for outdoor operation. It should only be used indoors in environments where humidity does not exceed 70% and temperatures range between 5°C and 40°C to prevent electrical hazards.

Is this answer helpful?

A

Speed is changed by adjusting the V-belts. Open the gear cover, loosen the motor tension knobs, move the motor to release tension, reposition the belts on the desired pulley combination, and then retighten the motor to achieve correct tension.

Is this answer helpful?

A

The spindle stroke is 60 mm. You can set the exact drilling depth using the depth stop with a scale, allowing for precise control over how deep the drill bit penetrates the material.

Is this answer helpful?

A

Absolutely not. Operating the machine with gloves is strictly forbidden as they can get caught in rotating parts, leading to severe injuries. Always keep hands free and away from the drill head.

Is this answer helpful?

A

The warranty period is 2 years for amateur use and 1 year for professional use. This covers mechanical and electrical components but excludes wear parts and damage caused by misuse or unauthorized repairs.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Powerful 630W motor handles diverse materials efficiently
  • Variable speed range from 420 to 2700 RPM for precise control
  • Comprehensive safety features including emergency stop and guard sensors
  • Stable construction with tilting table for versatile angle drilling
  • Easy assembly with clear instructions and included hardware
VS

Disadvantages

  • Requires grounding via a qualified electrician for safe operation
  • Heavy weight of 30 kg makes relocation difficult without assistance
  • Noisy operation may require hearing protection for extended use
  • Limited to indoor use due to moisture sensitivity
  • Optional vice must be purchased separately for clamping workpieces
M: QW-35-FL

Product Specification

Power

630W (230V)

No-load speed

420-2700 rpm

Chuck capacity

1.5-16mm keyless chuck

Features

Multi-speed (12 levels), depth stop

Dimensions (HxWxD)

33.1x11.6x18.7in

Weight

66.14 lbs

M: QW-35-FL

Product Description

The Zipper ZI-STB16T Electric Table Drill Press: A Versatile Workshop Essential

The Zipper ZI-STB16T Electric Table Drill Press stands as a robust and reliable tool designed for both hobbyists and professionals who demand precision in their woodworking, metalworking, and plastic drilling projects. This machine combines durability with user-friendly features, making it an ideal addition to any workshop setting. With a powerful 630-watt motor capable of handling various materials, the ZI-STB16T ensures efficient performance across a wide range of tasks.

Designed with safety as a top priority, this drill press includes essential protective features such as an emergency stop switch and automatic shutdown mechanisms when guards are opened. The variable speed control allows operators to adjust the spindle rotation from 420 to 2700 RPM, ensuring optimal cutting speeds for different material densities. Whether you are drilling small holes in soft wood or tackling harder metals, the adjustable belt system provides the necessary torque and speed versatility.

Assembly is straightforward, guided by clear instructions included with the unit. The sturdy baseplate and column provide a stable foundation, while the tilting table offers flexibility for angled drilling up to 45 degrees. The depth stop mechanism ensures consistent hole depths, which is crucial for repetitive tasks. Additionally, the inclusion of a chuck guard and proper locking handles enhances operational safety, protecting users from rotating parts and flying debris.

Maintenance is minimal yet critical for longevity. Regular cleaning of chips and dust, along with periodic lubrication of moving parts every 100 hours, keeps the machine running smoothly. The manufacturer recommends using only original spare parts to maintain warranty validity and ensure perfect fitment. For those seeking a dependable drill press that balances power, safety, and ease of use, the Zipper ZI-STB16T delivers exceptional value and performance.

Important Notes

  • Always wear eye protection and avoid loose clothing during operation.
  • Ensure the machine is securely anchored to prevent tipping.
  • Use appropriate extension cords based on length requirements to prevent voltage drop.
M: QW-35-FL

© Copyright 2026 Manual.ly