Manual.ly Logo

Yedoo Four Manual

0.0 · 0 Ratings

PDF manual · 116 Pages

English

M: OA-GPT-5-NAN
page

/ 116

Loading...
3cce278b2191d3e1fef68b7a6c58b886444a page b
Introduction
We recommend that you entrust the installation, adjustment
and regular maintenance to a specialist bicycle shop. Improper
intervention can lead to damage of the scooter or to an accident
with serious health consequences.
If you are technically capable, do not worry; this manual
contains all the information you need to help you assemble
your new scooter.
Send your questions, comments and suggestions for
improvement of our products by e-mail to: info@yedoo.eu.
EN
11
Yedoo frames are protected by
a Registered Community Design
(RCD), the commercial names
are protected by registered
trade marks.
More information from the
world of scooters and the list
of distributors can be found
at www.yedoo.eu.

Chat with your Yedoo Four manual using AI

Get instant AI answers from your Yedoo Four manual

Ask anything about the Yedoo Four. Answers come from this manual, with the pages they are based on.

Four Maintenance Schedule

Before each ride
Check brakes and technical condition

Verify brake function and overall scooter condition before every ride.

Show in the manual (page 17)
Regularly
Tighten screw connections

Periodically tighten all screw connections to prevent loosening.

Show in the manual (page 17)
Regularly
Check quick release mechanisms

Inspect the condition of quick release mechanisms regularly.

Show in the manual (page 17)
Regularly
Lubricate moving parts

Lubricate wheel bearings, handlebar bearings, brake lever pins, pivot points, and cables. Avoid getting lubricant on rims or brake pads.

Show in the manual (page 17)
Regularly
Check tyre pressure

Monitor tyre pressure and inflate to the recommended maximum value indicated on the tyre sidewall.

Show in the manual (page 17)
Regularly
Check tyre tread depth

Inspect tread depth regularly and replace tyres with new ones having the same parameters if necessary.

Show in the manual (page 17)
Regularly
Check self-locking nuts

Inspect self-locking nuts and replace them if they loosen spontaneously during riding.

Show in the manual (page 17)
Regularly
Check wheel spokes

Inspect wheel spokes for uneven tension which may cause rupture or loss of wheel centering.

Show in the manual (page 17)
After 150 km run-in
Adjust new scooter after run-in

Perform an additional adjustment after the initial run-in period when parts settle, not exceeding 150 km.

Show in the manual (page 17)
As needed
Clean scooter

Wipe off dirt with a wet cloth to keep the scooter clean.

Show in the manual (page 17)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Four?

Yes No

Frequently Asked Questions

A

The Yedoo Four supports a maximum load of up to 150 kg (330 lb) for the Four model; other Yedoo models may have lower limits (e.g., 120 kg for some city-sized variants). Always follow the label and manual for the specific model.

Is this answer helpful?

A

The scooter requires assembly following the manual; the kickstand is not included as standard and must be purchased separately. The recommended stand capacity is about 15 kg and must be mounted centered in the prepared front frame hole.

Is this answer helpful?

A

For V-brakes, ensure 1–2 mm clearance from rim at rest, align pads to the rim sidewall and adjust cable tension and spring symmetry. For disc brakes, mount rotors with correct rotation arrow, ensure pads run parallel to the disc and set minimal safe pad-to-disc gap using the tension roller or anchor bolt.

Is this answer helpful?

A

Regular checks include tightening fasteners, inspecting quick releases, checking tire pressure and tread, lubricating bearings and pivots (avoiding rims and pads), inspecting spokes and self-locking nuts, and degreasing contaminated braking surfaces. Recheck adjustments after the initial running-in period (up to 150 km).

Is this answer helpful?

A

Yes, but for road or night riding you must fit appropriate lights and reflectors per local regulations. Observe traffic rules and wear protective equipment; the scooter’s basic configuration is intended for daytime sport and recreation on smooth surfaces.

Is this answer helpful?

A

Loosen the brake pad adjustment screws and reposition the pads so they run parallel to the rotor across their full surface, then retighten. Use the disc adjustment roller or the anchor bolt to fine-tune cable tension if needed.

Is this answer helpful?

A

Yedoo provides rights for defects subject to applicable national law; typically purchasers can claim defects within 36 months from receipt. Warranty claims should be handled through the dealer with proof of purchase and a cleaned, complete scooter per the manual’s assembly and use conditions.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Robust steel frame and high maximum load (up to 150 kg / 330 lb) for durability and heavy riders.
  • Configurable braking options (V-brake or disc) with clear adjustment procedures for reliable stopping.
  • Two-position rear fork enables deck-height tuning for comfort or off-road clearance.
  • Quick-release wheels and straightforward assembly make wheel removal and maintenance fast.
  • Detailed maintenance and safety guidance helps extend service life and ensures correct setup.
VS

Disadvantages

  • Stand not included and is limited to about 15 kg capacity; needs optional purchase.
  • Requires periodic adjustment after break-in (up to 150 km) which may be inconvenient for some users.
  • Care needed to avoid contaminating rims and brake pads with lubricant; contamination reduces braking.
  • Not intended for jumps, acrobatics, or overloaded use — limits extreme-sport usage.
  • Some models have mixed wheel sizes that may complicate finding replacement tires or parts.
M: OA-GPT-5-NAN

Product Specification

Type

Scooter

Material

Steel, Aluminum

Dimensions

57.09x25.20x36.22-39.37in

Wheels

20in (front), 16in (rear)

Max. user weight

330.69lb

Tire type

Air

Suspension

None

Recommended age

12 years and up

Weight

23.14lb

Special features

Kickstand

M: OA-GPT-54-NAN

Product Description

Yedoo Four Scooter — Yedoo Four Scooter Manual

The Yedoo Four is a sturdy, commuter-oriented kick scooter designed for reliable everyday use. Built with a reinforced steel frame and available with mixed wheel sizes (typically 20" front / 16" rear), it supports up to 150 kg (330 lb) depending on model. The Four balances stability and agility for urban commuting, fitness rides, and longer recreational trips.

Assembly follows clear step-by-step guidance: install wheels with quick-release skewers ensuring spring orientation toward the hub; fit disc rotors where applicable (observe rotor rotation arrows and torx screw sequence); mount the stem and handlebars, staying below the marked maximum height; and route and tension brake cables for correct pad-to-rim or pad-to-disc clearance. Torque and adjustment ranges are specified for stem and brake fasteners to ensure safe clamping without overtightening.

Braking is addressed for both V-brake and disc configurations. V-brake setup emphasizes symmetrical pad spacing (1–2 mm clearance at rest), correct pad alignment to the rim sidewall, and brake lever angle set so fingers extend the rider's arm in a natural riding posture. Disc brakes require rotor alignment to wheel rotation, minimal pad-to-disc gap, and fine adjustment via the tension roller or anchor bolt.

The scooter includes a two-position rear fork to alter deck height: the upper position lowers the deck for easier, less strenuous riding on smooth surfaces; the lower position is for rougher terrain. Optional accessories such as a side stand (max ~15 kg load) can be fitted at a front frame mounting point; the stand is not included and should be installed centered in the bracket.

Maintenance guidance stresses regular checks and lubrication of bearings, cables, quick-release mechanisms, spokes, and threaded fasteners. Avoid contaminating rims and brake pads with grease; degrease with suitable solvent if contamination occurs. Inspect tire tread and pressure, adjust spokes for even tension, and recheck the scooter after a running-in period (recommended within the first 150 km) to retorque and fine-tune components.

Safety recommendations recommend daytime use on smooth surfaces in basic configuration; for road use or night riding install lights and reflectors per local regulations. Always wear protective gear (helmet, gloves, pads) and observe traffic rules. The manufacturer warns against jumps, acrobatics, and overloading. The Yedoo Four complies with relevant EU standards (EN 14619) and carries manufacturer warranty and defect-rights provisions (36 months subject to local law and correct use/assembly).

Notes:

  • Follow torque specifications and do not exceed recommended tightening moments.
  • Set brake lever angles to a natural finger extension position while standing on the deck.
  • Recheck and retighten fasteners and spokes after the initial break-in period (up to 150 km).
  • Keep the scooter clean and store indoors in a dry, shaded place to preserve components.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly