Manual.ly Logo

XYZprinting da Vinci Color Manual

0.0 · 0 Ratings

PDF manual · 20 Pages

English

M: gpt-5.6-terra
page

/ 20

Loading...
f8e5b7918b0a849ab38190fff906701dc7a4 page f
P15
2. Tap to conrm that you want to change the
nozzle.
6. Change the print head from above the
machine.
1. Tap Change Nozzle. 3. Wait until the print head moves to a proper
position for change.
7. Press the white release button to separate
the print head.
4. The position of the print head change is
shown above.
5. Turn off the power before changing the
print head.
8. Hold the print head with one hand and
remove the bus with the other. The removal
of the print head is completed.
Function Operation and Instructions
Clean Nozzle
D2-1
Print-Head
Change Nozzle
D2-2 Print-Head
Installation sequence of new print head:
1. Connect the bus.
2. Press the white release button on the print head
and assemble the print head and the mechanism.
After attaching the print head, check to see that it
is secure and does not shake.
3. Turn on and use the printer.
2. Tap Clean Nozzle in the print
head section.
1. Please clean the nozzle after
printing 60 hours.
3. Check if cleaning is necessary. Tap Check to clean it.
Note: do not touch the metal part of the print head as it becomes hot during the operation.
3. Inset the feed hole cleaning wire
into the feed hole and push it down-
wards to drive out the lament from
the print head. (It is recommended
that the operation is performed from
the top of the machine.)
5. Insert the print head cleaning wire
into the nozzle from the bottom to
clean it.
4. Remove the lament residue from
the print head with a wire brush.
6. After the cleaning operation is
completed, tap DONE.
When the temperature of the print head reaches the operating temperature, the cleaning operation will start.
In order to prevent print quality from impact due to residual and accumulated filament, which results in poor discharge, after
long-term use of print nozzle, it is recommended to enable the "CLEAN NOZZLE" (nozzle cleaning) function of the printer every
60 hours of print to clear residuals with nozzle cleaning wire or feeding path cleaning wire. (Filament should be unloaded
from the extruder before cleaning the feeding path.)
Note

Chat with your XYZprinting da Vinci Color manual using AI

Get instant AI answers from your XYZprinting da Vinci Color manual

Ask anything about the XYZprinting da Vinci Color. Answers come from this manual, with the pages they are based on.

da Vinci Color Maintenance Schedule

Every 60 hours
Clean the print head nozzle

After long-term use, enable the Clean Nozzle function every 60 hours to clear filament residuals. Unload filament before cleaning the feeding path.

Show in the manual (page 15)
When dirty or broken
Replace the PC film on the print bed

The replaceable PC film on the rubber magnet should be replaced when it becomes dirty or broken to ensure proper adhesion.

After printing
Store ink cartridges properly

To prevent drying, clean the nozzle with alcohol, seal the cartridge with its protective cover, and store at room temperature.

Show in the manual (page 10)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend da Vinci Color?

Yes No

Frequently Asked Questions

A

It combines fused filament fabrication for the 3D structure with CMYK inkjet printing for surface color. This lets compatible models be produced with color applied during the printing process.

Is this answer helpful?

A

Full-color printing supports objects up to 185 x 185 x 150 mm. Single-color printing without inkjet color supports up to 200 x 200 x 150 mm.

Is this answer helpful?

A

The printer supports 1.75 mm 3D Color-inkjet PLA, PLA, Tough PLA, and PETG filament. Full-color results require the compatible color-inkjet PLA material and CMYK ink cartridges.

Is this answer helpful?

A

Yes. Prepared 3CP projects can be imported from a USB drive and printed from the touchscreen. This supports offline operation after the project has been prepared.

Is this answer helpful?

A

The printer uses separate black, cyan, magenta, and yellow ink cartridges. Test printing, color calibration, and ink calibration help correct alignment or quality issues when needed.

Is this answer helpful?

A

Yes. It can connect to Wi-Fi when the wireless dongle is installed. XYZmaker software can then be used to confirm the connection, monitor the printer, prepare models, and start prints.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Combines FFF construction with CMYK inkjet coloring for directly printed full-color models.
  • Offers automatic filament feeding and automatic print-bed calibration for a simpler workflow.
  • Supports USB, USB cable, Wi-Fi, and offline printing from imported 3CP projects.
  • Includes a 5-inch color touchscreen with maintenance, calibration, and material controls.
VS

Disadvantages

  • Full-color build volume is smaller than the single-color build volume.
  • The 32 kg printer requires a sturdy location and two people for safe moving.
  • Color printing depends on compatible ink cartridges, calibration, and regular ink checks.
  • The print bed is not heated, which may limit material and adhesion options.
M: gpt-5.6-terra

Product Specification

Process

Fused Filament Fabrication (FFF)

Configuration

1x moving print head (front/back, left/right), 1x moving print bed (up/down)

Construction

Assembled model, enclosed print chamber (with viewing window and front door), all-metal frame, onboard controls, integrated filament holder

Recommended materials

0.07 in filament, closed system (NFC-encoded), Color Inkjet PLA, PLA, PETG, Carbon

Build volume

7.87 x 5.91 x 7.87 in (W x H x D)

Print head configuration

1x print head (1x nozzle with mono feed, 0.02 in, brass, replaceable), 1x direct extruder (with automatic filament loading)

Layer height

0.004-0.016 in

X accuracy

0.49 mil

Y accuracy

0.49 mil

Z accuracy

0.16 mil

Speeds

1.18-4.72 in/s printing (4.72 in/s maximum recommended), 7.09 in/s rapid travel without printing

Print bed

Rectangular, metal, removable (magnetic attachment), automatic print bed leveling

Interfaces

USB-A 2.0 (host), USB-B 2.0, Wi-Fi (802.11b/g/n)

Additional features

Inkjet print head (CMYK, installed simultaneously)

Display

5 in diagonal, color, touchscreen

Controls

Touchscreen, optionally via computer

Power supply

100-240 V, 240 W

Operating environment

59-90 F, 30-60% RH

Dimensions

23.62 x 25.20 x 22.87 in (W x H x D)

Weight

71 lb (empty)

Color

Red (housing), black (frame), black (print bed)

Package contents

1x printer, 1x 1.32 lb PLA filament (Color Inkjet PLA), tool set, cleaning set, adhesive film for print bed, USB-A 2.0 Wi-Fi adapter

Special features

Filament sensor, full-color 3D printing

Manufacturer warranty

One year

M: gpt-5.6-terra

Product Description

XYZprinting da Vinci Color Manual: Full-Color 3D Printing Made Practical

The XYZprinting da Vinci Color combines fused filament fabrication with CMYK inkjet technology to create detailed 3D models with color applied directly to their surfaces. This hybrid approach makes the printer a strong option for makers, educators, designers, and small teams that want to produce presentation-ready prototypes without relying on manual painting after printing.

Designed for Colorful, Detailed Models

Using 3D Color-inkjet PLA, the machine can build full-color objects up to 185 x 185 x 150 mm. For projects that do not need inkjet color, it supports single-color builds up to 200 x 200 x 150 mm. A 0.4 mm print head and layer heights from 0.1 to 0.4 mm provide flexibility between finer surface detail and faster production.

The XYZprinting da Vinci Color Manual highlights a practical workflow built around automatic filament feeding, separate CMYK ink cartridges, and automatic print-bed calibration. The removable EZ rubber magnet print surface supports easier part removal after the platform has cooled, while the replaceable PC film helps maintain a usable printing surface over time.

Straightforward Controls and Connectivity

A 5-inch color touchscreen provides direct access to material loading, ink replacement, calibration, print controls, settings, and printer statistics. Users can import prepared 3CP projects from a USB drive for computer-free printing, or connect through USB and wireless networking. Wi-Fi operation requires the supplied wireless dongle and can be managed through XYZmaker software.

XYZmaker supports common 3D formats including AMF, PLY, OBJ, and STL. OBJ models are particularly useful for color work, allowing color-capable designs to be prepared for output. The printer also supports offline printing, which can be helpful in classrooms, studios, or workspaces where a dedicated computer is not always available.

Setup, Care, and Safe Operation

This is a substantial desktop system, measuring 600 x 581 x 640 mm and weighing 32 kg. It should be placed on a level, sturdy surface and moved by two people. Good ventilation is recommended during printing, and the enclosed moving and heated components should not be touched while active.

Routine care includes checking filament flow, cleaning residue from the print module, maintaining the nozzle, and running color or ink calibration when output alignment needs adjustment. The touchscreen also offers Z-offset adjustment, jog controls, nozzle cleaning, and door-lock settings. These features help users keep prints consistent while handling common maintenance tasks with confidence.

Notes

  • Keep the original packaging for protected transport and service returns.
  • Allow the print bed and print head to cool before removing parts or performing maintenance.
  • Use compatible 1.75 mm filament and the specified CMYK ink cartridge system for reliable results.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly