Manual.ly Logo

XYZprinting da Vinci 3D Pen Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
39a070161236dd885aa56bb5591203989321 page 2
-2-
前後推拉工具,即可將出料口處的殘留料由筆頭
推出。
2
After using the pen or when the pen fails to extrude, the blocking tool can
be used to clean the extruder module. Please first unload the filament,
then keep the pen in continuously extruding mode. Make sure that the
pen is kept in a heated state to facilitate the removal of residual materials
from the extruder module of the pen. Take the back cover and push it
backwards and take out the white guide tube.
Use the unblocking tool to remove any residue within the white guide
tube. Make sure that all remain filaments have been removed from the
guide tube, reinstall the back cover, and restart the feeding process.
Place the unblocking tool in the feeding path and insert the sharp tip of
the tool into the round opening at the top of the insertion route.
Push and pull tool. Residual materials from the extrusion module can be
pushed out from the opening.
Press the tool slightly so that it is fully inserted into the feeding route. The
tip of the tool will move about 1 cm through the round opening.
Clean the extruder module
◆
Technical Support and Tutorial Video
◎Contact information
[US]
XYZprinting, Inc.
Add: 9877 Waples Street San Diego, CA 92121
Website: http://us.xyzprinting.com
Contact Information
Technical Support: 855-999-3348 | Service Hour: Monday-Friday 9am-9pm (EST)
Online Service Desk:
http://support.xyzprinting.com/us_en/Help/ticket/home
[EU]
XYZprinting Netherlands B.V.
Add: Wagenmakerstraat 7, 2984BD Ridderkerk The Netherlands
Website: http://eu.xyzprinting.com
Online Customer Service Desk:
http://support.xyzprinting.com/eu_en/Help/ticket/home
[Global]
Add: No. 147 Sec. 3 Beishen Rd. Shenkeng Dist. New Taipei City Taiwan
Online Service Desk:
http://support.xyzprinting.com/tw_zh_tw/Help/ticket/home
◎Tutorial Video
For tutorial videos, please go to:
http://support.xyzprinting.com/eu_en/Help/tutorial

Chat with your XYZprinting da Vinci 3D Pen manual using AI

Get instant AI answers from your XYZprinting da Vinci 3D Pen manual

Ask anything about the XYZprinting da Vinci 3D Pen. Answers come from this manual, with the pages they are based on.

da Vinci 3D Pen Maintenance Schedule

After each project
Unload remaining filament

After finishing your work, unload the remaining filament from the pen for optimal operation.

Before each next use
Cut off the melted filament tip

Cut the melted filament tip straight before using the pen again to prevent the feed path from clogging.

After each use
Clean the extruder module

Unload filament, keep the pen heated in continuous extrusion mode, and use the cleaning tool to remove all filament residue from the guide tube and feed path.

M: gpt-5.6-terra

Ask a Question

0/1000

Do you recommend da Vinci 3D Pen?

Yes No

Video Manual

▼ Getting started with the Da Vinci Pro

Frequently Asked Questions

A

You should strictly use official XYZprinting PLA filament. Using filaments from other manufacturers will void your warranty and may cause clogging or poor performance.

Is this answer helpful?

A

The LED indicator turns solid green when the nozzle has reached the correct operating temperature above 180 degrees Celsius and is ready for filament loading or extrusion.

Is this answer helpful?

A

Yes, but you must unload all remaining filament before inserting a new color to prevent unwanted mixing. Use the cleaning tool to remove residue if necessary.

Is this answer helpful?

A

First, try unloading the filament. If that fails, remove the back cover and feed tube to clean out any blockages using the provided cleaning tool.

Is this answer helpful?

A

While designed for ease of use, the nozzle gets extremely hot. Adult supervision is required, and users must wait for the pen to cool before touching it.

Is this answer helpful?

A

The included package contains three meters of filament. For optimal feeding, ensure the filament length does not exceed three meters before insertion.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Intuitive button controls for loading, unloading, and continuous extrusion
  • LED status indicators provide clear feedback on temperature and mode
  • Includes essential accessories like cleaning tool and starter filament
  • Compatible with official XYZprinting PLA for best results and warranty
  • Easy-to-clean design with removable feed tube for maintenance
VS

Disadvantages

  • Nozzle gets very hot and requires careful handling to avoid burns
  • Warranty is voided if non-official filament brands are used
  • Initial prints may show color variations due to residual test material
  • Filament must be cut to specific lengths under 3 meters for proper feeding
  • Odors are produced during operation requiring a well-ventilated area
M: QW-35-FL

Product Specification

Type

3D Printing Pen

Materials

1.75mm, PLA

Nozzle

Metal, 0.8mm

Melting Temperature

356°F

Power Supply

Hollow Socket

Size

11x9.8x7 inches (LxWxH)

Weight

2.47 oz

Color

orange/black

Package Contents

1x 3D Printing Pen, 1x Power Adapter, 3x 3.28ft PLA Filament, 1x Cleaning Tool

M: QW-35-FL

Product Description

Discover the XYZprinting da Vinci 3D Pen Manual Experience

The XYZprinting da Vinci 3D Pen offers a creative and accessible way to bring your ideas to life in three dimensions. Designed for both beginners and seasoned hobbyists, this pen simplifies the process of 3D drawing by allowing you to extrude heated PLA filament directly onto surfaces. The device features an intuitive button system that controls loading, unloading, and continuous extrusion modes, making it easy to create bridges, structures, or detailed freehand art.

Safety is a top priority with this tool. The nozzle reaches high temperatures quickly, so users must avoid touching nearby objects until the pen cools down completely. Proper ventilation is essential during operation as heating filament can produce mild odors. To ensure optimal performance and maintain warranty coverage, it is highly recommended to use only official XYZprinting PLA filament. Using filaments from other manufacturers may void the warranty and lead to clogging issues.

The pen includes a comprehensive set of accessories such as a power adapter, three meters of random colored PLA filament, a cleaning tool, and a quick start guide. The LED indicator provides clear visual feedback on the pen's status, glowing red when off or cooling, blinking red while heating, and turning green when ready for use. For maintenance, the device allows for easy cleaning of the feed tube and extruder module using the included tool, ensuring long-lasting reliability.

Important Notes

  • Always allow the pen to cool before storing it to prevent damage to surrounding items.
  • Cut the filament tip straight if it becomes partially melted to prevent feeding issues.
  • Change colors by fully unloading old filament to avoid mixing hues.
  • Use a stable base when starting complex 3D drawings to ensure structural integrity.
M: QW-35-FL

© Copyright 2026 Manual.ly