Manual.ly Logo

Xilence LiQuRizer LQ240PRO Manual

0.0 · 0 Ratings

PDF manual · 9 Pages

English

M: QW-35-FL
page

/ 9

Loading...
5217ae854af775750c8b423969f4467f0cfe page 4
1. Stecken Sie die Backplate von hinten durch das Mainboard.
* Die Farbe der Unterlegscheibe von der LGA1700 Backplate ist blau.
2. Drehen Sie das Mainboard zur Vorderseite, setzen Sie den LGA1700 Abstandshalter und die Klammer auf. Fixieren Sie die Backplate
mithilfe der Rändelschrauben.
3. Tragen Sie gleichmäßig eine dünne Schicht Wärmeleitpaste auf den Prozessor auf.
4. Setzen Sie den Pumpenkopf auf den Prozessor auf und xieren Sie den Pumpenkopf.
1. Put the LGA1700 backplate onto the mainboard from the back.
* the color of the washer on LGA1700 backplate is blue.
2. Turn to the front of the mainboard, put on the LGA1700 stando, and then the bracket, and secure by tightening nuts.
3. Apply a thin layer of thermal grease onto the CPU surface.
4. Put on the water block and secure.
1. LGA1700 артқы тақтасын артқы жағындағы аналық платаға орнатыңыз.
* LGA1700 артқы жағындағы тығыздағыштардың түсі көк.
2. Аналық платаны оң жағымен өзіңізге қарай бұраңыз, LGA1700 тығындарын сырғытыңыз, бекіткіштерді орнатыңыз жəне
гайкаларды бұрағышпен қатайту арқылы бекітіңіз.
3. Процессорға термиялық пастаны жұқа қабатпен жағыңыз.
4. ССЖ (суды салқындату жүйесінің) блогын орнатыңыз жəне оны гайкалармен бекітіңіз.
1. Установите бэкплейт LGA1700 на материнскую плату с обратной стороны.
* Цвет прокладок на бэкплейте LGA1700 – синий.
2. Переверните материнскую плату лицевой стороной к себе, наденьте стопоры LGA1700, установите крепления и закрепите их,
затянув гайки отвёрткой.
3. Нанесите тонким слоем термопасту на Ваш процессор.
4. Установите блок СВО на процессор, и закрепите его гайками.
03
2
14
11
4
7

Chat with your Xilence LiQuRizer LQ240PRO manual using AI

Get instant AI answers from your Xilence LiQuRizer LQ240PRO manual

Ask anything about the Xilence LiQuRizer LQ240PRO. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend LiQuRizer LQ240PRO?

Yes No

Frequently Asked Questions

A

It supports AM4, LGA1700, LGA1200, and LGA115X platforms.

Is this answer helpful?

A

You should apply a thin layer manually according to instructions.

Is this answer helpful?

A

Yes, keep the original backplate during AM4 installation steps.

Is this answer helpful?

A

Use the provided tightening nuts or knurled screws carefully.

Is this answer helpful?

A

Check specific standoffs for older LGA115X versions first.

Is this answer helpful?

A

Stop immediately and check alignment to avoid breaking parts.

Is this answer helpful?

A

Consult manual as features vary by specific model configuration.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Broad compatibility with AM4, LGA1700, and LGA1200 sockets
  • Simple installation process with clear multi-language instructions
  • Effective thermal management requiring minimal maintenance
  • Durable design built for longevity and high load performance
VS

Disadvantages

  • Requires careful alignment to prevent leaks or damage
  • Initial setup involves removing stock retention frames
  • Application of thermal paste is mandatory and precise
M: QW-35-FL

Product Specification

Type

Internal (Closed Loop)

Heatsink

CPU, Copper

Compatibility

1150, 1151, 1155, 1156, 1200, 1700, 2011-3, 2066 (excluding 2011-0 / 2011-1), AM4, AM5

Reservoir

N/A

Pump

12V

Connectors

N/A

M: QW-35-FL

Product Description

Discover the Power of Xilence LiQuRizer Liquid Cooling Systems

The Xilence LiQuRizer represents a significant leap in personal computer cooling efficiency. Designed specifically for enthusiasts and competitive gamers alike, this advanced water cooling system ensures your central processing unit stays cool under heavy computational loads. Understanding the detailed instructions provided in the Xilence LiQuRizer Manual is crucial for achieving optimal thermal performance during the initial installation phase. Proper setup guarantees component longevity and quiet operation within your computer chassis without disturbing neighbors. Many users find that following specific guidelines prevents potential damage to delicate motherboard components during the mounting process.

Versatility Across Major Processor Platforms

One of the most attractive features is the broad compatibility across various modern processor sockets found today. Whether you utilize an AMD Ryzen platform or an Intel Core chip, the cooler adapts seamlessly to fit your build requirements. The official documentation outlines specific procedures for AM4 processors particularly well. Users must remove original retention frames while keeping the metal backplate intact to ensure safety. This step ensures structural integrity during the subsequent mounting sequence for stability. For newer Intel systems like LGA1700, the procedure involves adjusting long screws on the backplate carefully. Precise alignment is required to secure the pump head correctly against the processor surface below.

Installation Precision and Thermal Management

Effective thermal management begins even before the actual hardware is physically mounted onto your board. Thoroughly cleaning the top surface of the CPU core is a mandatory preparatory step outlined clearly in guides. Applying a thin uniform layer of high-quality thermal grease enhances heat transfer directly to the pump block surface efficiently. This simple action significantly lowers sustained operating temperatures over extended periods of gameplay or rendering workloads. Securing the final unit with provided tightening nuts ensures firm contact between surfaces. Never force any components during assembly. If unexpected resistance is met, check alignment immediately to prevent cracks. Misalignment can lead to internal leakage or severe overheating issues later on unexpectedly.

Maintenance Strategies and System Longevity

Routine checks help keep the liquid cooling system running smoothly for years. Although designed for extreme durability, periodic maintenance significantly extends expected life expectancy beyond initial projections. Users should monitor fluid levels periodically if visibility allows visual inspection of the loop. Dust accumulation around radiator fins also negatively impacts airflow efficiency inside your case. Cleaning dust filters regularly improves overall internal case ventilation conditions drastically. The provided technical resources offer troubleshooting tips for common configuration queries encountered by builders. Following professional advice helps avoid unnecessary hardware replacements or warranty claims down the expensive road.

Concluding Thoughts on Cooling Performance

Investing in high-quality cooling solutions effectively protects your financial investment in hardware components. The Xilence LiQuRizer Manual serves as your absolute best companion during complex setup phases. With correct installation techniques, absolute silence and maximum power output become achievable daily goals together. Experience better gaming performance without annoying noise distractions. Enjoy stable high frame rates while operating temperatures remain consistently manageable throughout intense competitive sessions.

M: QW-35-FL

© Copyright 2026 Manual.ly