Manual.ly Logo

Worx WX822.9 Manual

0.0 · 0 Ratings

PDF manual · 92 Pages

English

M: gpt-5.6-terra
page

/ 92

Loading...
df151a3259aee092584b7d39334e69a4b56a page 6
6
20V Cordless Detail Sander
EN
PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part
of the power tool may result in personal
injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair and clothing
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
h) Do not let familiarity gained from frequent
use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause severe
injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application. The
correct power tool will do the job better and safer
at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of

Chat with your Worx WX822.9 manual using AI

Get instant AI answers from your Worx WX822.9 manual

Ask anything about the Worx WX822.9. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend WX822.9?

Yes No

Frequently Asked Questions

A

It is intended for dry sanding wood, plastic, filler, and coated surfaces. It is not designed for plaster or spackle.

Is this answer helpful?

A

No. The WX822.9 is a solo version, so the battery and charger are not included. It is intended for users with compatible Worx 20V PowerShare equipment.

Is this answer helpful?

A

The tool includes a 140 x 90 mm detail plate and a finger plate. The finger plate is useful for narrow spaces, corners, and detailed edges.

Is this answer helpful?

A

It has a no-load speed of 12,000 oscillations per minute and a 2 mm orbital diameter, supporting controlled finishing and surface preparation.

Is this answer helpful?

A

Fit the dust bag before sanding and empty it every 5 to 10 minutes for more efficient dust collection. Do not operate the sander without it properly installed.

Is this answer helpful?

A

Clamp the workpiece, select the correct grit, start the tool before contacting the surface, and use light pressure. Sand wood in the direction of the grain and replace worn sheets promptly.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Cordless 20V PowerShare design provides freedom of movement for detailed sanding tasks.
  • Includes detail and finger sanding plates for corners, narrow edges, and small surfaces.
  • Light 0.8 kg solo-tool weight supports controlled handling and reduced fatigue.
  • Dust bag helps collect debris, while hook-and-loop sheets allow quick abrasive changes.
  • Suitable for dry sanding wood, plastic, filler, and coated surfaces.
VS

Disadvantages

  • WX822.9 is supplied without a battery or charger, requiring compatible PowerShare equipment.
  • Not intended for plaster or spackle work.
  • Dust bag needs emptying every 5-10 minutes for efficient collection.
  • Continuous heavy pressure can reduce performance and overload the motor.
  • Hearing, eye, dust, and hand protection are required during operation.
M: gpt-5.6-terra

Product Specification

Type

Multi-sander

Battery

20 V, lithium-ion

No-load speed

0-12,000/min

Oscillation diameter

0.08 in

Sanding surface

5.51 x 5.51 x 3.54 in (Delta)

Tool attachment

Hook-and-loop fastening

Features

Variable speed control, soft grip, auxiliary handle, dust extraction

Included

Without charger and battery, includes accessory set, dust collection bag

M: gpt-5.6-terra

Product Description

Worx WX822.9 20V PowerShare Cordless Multi-Sander solo - Read, Download & Print Free

The Worx WX822.9 20V PowerShare Cordless Multi-Sander solo is a compact detail sander designed for accurate finishing work where larger tools cannot easily reach. Its cordless format helps users move freely around furniture, trim, cabinets, stairs, and other detailed areas without managing a power lead. As a bare-tool model, the WX822.9 is a practical choice for people who already own compatible Worx PowerShare batteries and chargers.

Built for detailed surface preparation

This multi-sander uses a 140 x 90 mm detail plate for general finishing and includes a finger plate for narrow corners, edges, and confined spaces. With a no-load speed of 12,000 oscillations per minute and a 2 mm orbital diameter, it is intended to remove surface material efficiently while maintaining control. It is suitable for dry sanding wood, plastic, filler, and coated surfaces.

The lightweight 0.8 kg body supports comfortable handling during touch-ups and longer finishing tasks. Hook-and-loop sanding sheets make abrasive changes straightforward, allowing users to switch from coarse paper for rough preparation to finer grits for smoother final results. For the best finish on wood, work with the grain and secure the workpiece before starting.

Cleaner and more controlled sanding

A supplied dust bag helps collect sanding debris during use. Emptying it regularly, ideally every five to ten minutes, supports effective dust collection and keeps the work area cleaner. The tool should always be used with the dust bag fitted, along with suitable eye, hearing, dust, and hand protection.

The WX822.9 is designed for careful dry sanding rather than heavy stock removal. Let the abrasive do the work instead of applying excessive pressure, as pushing too hard can reduce sanding efficiency, overload the motor, and wear the sanding pad faster. Replacing worn sanding paper also protects the base plate and helps maintain consistent results.

Note: This solo version does not include a battery or charger. Use a compatible Worx 20V PowerShare battery and the specified charging equipment. Remove the battery before changing accessories, cleaning, storing, or carrying out maintenance.

Practical care tips

Keep the ventilation slots and controls free from dust, clean the tool with a dry cloth, and store it in a dry location. Avoid water and chemical cleaners. The recommended operating and storage temperature range for the tool and battery is 0 to 45 degrees C. With the correct abrasive, regular dust-bag emptying, and a light, steady hand, this cordless detail sander can deliver clean results on renovation, decorating, and DIY finishing projects.

M: gpt-5.6-terra

© Copyright 2026 Manual.ly