Manual.ly Logo

Worx WX812 Manual

0.0 · 0 Ratings

PDF manual · 124 Pages

English

M: gpt-5.6-terra
page

/ 124

Loading...
33578b3c2922ef8e15d78fd58e6ca15be0e4 page 6
6
EN20V Cordless Brushless Angle Grinder
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all safety warnings and all
instructions.
Failure to follow the warnings
and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you
to lose control
.
2. ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk of
electric shock.
3. PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A
moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always wear
eye protection.
Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries
.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool.
Carrying power tools with your
finger on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used.
Use of dust
collection can reduce dust-related hazards.
4. POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power
tool will do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools.
Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.
Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use.
Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking
into account the working conditions and the
work to be performed.
Use of the power tool for
operations different from those intended could result
in a hazardous situation.
5. BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type

Chat with your Worx WX812 manual using AI

Get instant AI answers from your Worx WX812 manual

Ask anything about the Worx WX812. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend WX812?

Yes No

Frequently Asked Questions

A

The WX812 is designed for grinding and abrasive cutting of metal and stone materials without water. Use the correct disc and guard for each application.

Is this answer helpful?

A

It uses 125 mm discs with a 22.2 mm bore. The spindle thread is M14. Always select accessories rated for the tool's speed and compatible with its mounting system.

Is this answer helpful?

A

Yes. The grinder is compatible with Worx 20V PowerShare battery packs. Listed compatible capacities include 1.5Ah, 2.0Ah, and 4.0Ah batteries.

Is this answer helpful?

A

Not necessarily. The supplied accessories can vary by package, and the product information notes that not every illustrated accessory is included as standard.

Is this answer helpful?

A

No. Cutting discs must not be used for rough grinding. Use a suitable grinding disc and the correct grinding guard for that type of work.

Is this answer helpful?

A

Wear safety glasses or a face shield, hearing protection, protective gloves, and a dust mask or respirator appropriate to the material. Keep bystanders away from the work area.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Brushless motor supports efficient cordless performance for cutting and grinding tasks.
  • Uses 125 mm discs and reaches a no-load speed of 8,500 rpm.
  • Compatible with the Worx 20V PowerShare battery system.
  • Compact bare-tool weight of approximately 1.6 kg supports portability.
  • Includes an auxiliary handle and grinding wheel guard for controlled use.
VS

Disadvantages

  • Battery pack and charger may be sold separately depending on the package.
  • A specific cutting guard is required for abrasive cutting operations.
  • Not recommended for sanding, wire brushing, or polishing applications.
  • Noise and vibration require appropriate protective equipment and managed use.
  • Disc selection, fitting, and guard positioning require careful attention.
M: gpt-5.6-terra

Product Specification

Type

Angle grinder

No-load speed

8,500 rpm

Disc diameter

4.92 in

Tool holder

M14 spindle thread, spindle lock

Features

Soft grip, auxiliary handle, motor brake, brushless motor

Weight

3.53 lb (without battery)

M: gpt-5.6-terra

Product Description

Worx WX812 20V PowerShare Cordless Angle Grinder - Read, Download & Print Free

The Worx WX812 20V PowerShare Cordless Angle Grinder is a compact, cordless tool designed for practical metalworking and masonry tasks. With a brushless motor and a 20V Max battery platform, it offers portable grinding and cutting performance without the restriction of a power cord. It is suited to users who need a capable tool for workshops, garages, maintenance work, and on-site jobs.

Built for Grinding and Cutting

This angle grinder uses 125 mm discs with a 22.2 mm bore and an M14 spindle thread. Its no-load speed reaches 8,500 rpm, providing the rotation needed for rough grinding and abrasive cutting. The tool is intended for metal and stone materials and can also be used with suitable accessories for specific compatible applications.

For controlled handling, the WX812 includes an auxiliary handle and a wheel guard. The guard should always be fitted and positioned correctly for the selected task. A dedicated cutting guard is required when using abrasive cutting discs, while grinding work requires the appropriate grinding guard. These details help support safer, more accurate operation.

Cordless PowerShare Convenience

As part of the Worx PowerShare range, the grinder works with compatible 20V battery packs. Supported capacities include 1.5Ah, 2.0Ah, and 4.0Ah options, allowing users to choose between a lighter setup or longer runtime. The bare tool weighs approximately 1.6 kg, which can make it easier to carry between tasks than a corded alternative.

The brushless motor design is a valuable feature for users who want efficient power delivery and reduced maintenance associated with motor brushes. Before changing discs, adjusting the guard, or performing maintenance, remove the battery pack and wait until the disc has stopped completely.

Safe Working Practices Matter

Angle grinders require careful technique. Wear eye protection, hearing protection, gloves, and a suitable dust mask. Keep the workpiece securely clamped, maintain a firm two-handed grip, and start the tool at no load before contacting the material. For rough grinding, maintain an angle of around 15 to 30 degrees between the disc and workpiece.

Do not use cutting discs for grinding, do not force the disc into the material, and never use damaged accessories. Regularly inspect discs, flanges, guards, and ventilation openings. Clean the tool with a dry cloth only, and store it in a dry location.

Notes

  • Battery, charger, and some accessories may not be included in every package.
  • Use only compatible Worx battery packs and chargers.
  • Recycle batteries and electrical equipment through appropriate local collection services.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly