Manual.ly Logo

Worx WX500 Manual

0.0 · 0 Ratings

PDF manual · 104 Pages

English

M: QW-35-FL
page

/ 104

Loading...
02e570a9ef766eb2675e85f5d7596f59f945 page 7
7
Cordless Reciprocating Saw EN
PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair and clothing
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
h) Do not let familiarity gained from frequent
use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause severe
injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.

Chat with your Worx WX500 manual using AI

Get instant AI answers from your Worx WX500 manual

Ask anything about the Worx WX500. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend WX500?

Yes No

Frequently Asked Questions

A

The WX500 is designed to cut wood, steel, PVC pipes, plastic, and aluminum. While it includes blades for wood and metal, separate blades are recommended for optimal performance on harder metals or plastics.

Is this answer helpful?

A

No, the battery pack is shipped uncharged. You must fully charge it before the first use to ensure maximum performance and longevity of the Li-Ion cells.

Is this answer helpful?

A

Turn the tool-free blade clamp lever counter-clockwise to its maximum angle, insert the blade until it hits the end, and release the lever. It will automatically clamp the blade securely.

Is this answer helpful?

A

Yes, the pivoting foot plate can be adjusted to allow for bevel cuts, giving you flexibility to cut at various angles depending on your project needs.

Is this answer helpful?

A

Yes, it features insulated gripping surfaces. However, always exercise caution when cutting into walls or areas where hidden wiring might exist to avoid electric shock.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Variable speed control from 0-3000 SPM for precise cutting
  • Tool-free blade change system saves time
  • Compatible with Worx 20V PowerShare battery ecosystem
  • Pivoting foot plate allows for adjustable bevel cuts
  • Cordless design offers maximum mobility and convenience
VS

Disadvantages

  • Blades for steel, plastic, and aluminum sold separately
  • Noise level of 90.2dB requires hearing protection
  • Heavy vibration may cause fatigue during long sessions
  • Battery not included in some standard packages
  • Requires regular cleaning of ventilation slots to prevent overheating
M: QW-35-FL

Product Specification

Type

Reciprocating saw

No-load stroke rate

0-3000/min

Cutting capacity

Wood 5.12 in, Steel 0.39 in

Stroke

0.79 in

Tool mounting

Quick-change system

Features

Speed control, Softgrip

M: QW-35-FL

Product Description

Worx WX500 20V PowerShare Jigsaw: Your Ultimate Cordless Cutting Companion

The Worx WX500 20V PowerShare Jigsaw represents a significant leap in portable power tool design, offering professionals and DIY enthusiasts the freedom to cut without being tethered by cords. Designed with the versatile PowerShare battery system, this tool allows you to use a single battery pack across a wide range of Worx tools, maximizing efficiency and reducing costs. Whether you are tackling intricate woodwork, cutting through metal pipes, or making flush cuts near walls, this jigsaw delivers consistent performance.

Equipped with a variable speed trigger ranging from 0 to 3000 strokes per minute, users can precisely control the cutting action based on the material thickness and type. The tool-free blade clamp lever ensures quick and easy blade changes, minimizing downtime during complex projects. A pivoting foot plate allows for angle adjustments, enabling bevel cuts up to 45 degrees for more creative and structural applications. The ergonomic design features a lock-off button for safety and comfort during extended use, while the lightweight construction reduces user fatigue.

Safety is paramount with the WX500. It includes insulated gripping surfaces to protect against hidden wiring and clear instructions for proper battery handling. The tool comes with specific blades for wood and metal, ensuring optimal results right out of the box. By keeping your work area clean and using appropriate personal protective equipment, you can achieve professional-grade cuts safely. This jigsaw is not just a tool; it is a reliable partner for every cutting challenge you face in your workshop or on the job site.

M: QW-35-FL

© Copyright 2026 Manual.ly