Manual.ly Logo

Worx WX392.9 Manual

0.0 · 0 Ratings

PDF manual · 104 Pages

English

M: gpt-5.6-terra
page

/ 104

Loading...
170cc1ab5b0eb9e207971a5f388d038f5741 page 8
Cordless Rotary Hammer EN
8
accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
5. BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush
with water. If liquid contacts eyes,
additionally seek medical help.Liquid
ejected from the battery may cause irritation or
burns.
6. SERVICE
a) Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
HAMMER SAFETY
WARNINGS
1. Wear ear protectors. Exposure to noise can
cause hearing loss.
2. Use auxiliary handles, If supplied with the
tool. Loss of control can cause personal
injury.
3. Hold power tools by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contacting
a ‘live’ wire may make exposed metal parts
of the power tool ‘live’ and could give the
operator an electric shock.
SAFETY WARNINGS FOR
BATTERY PACK
a) Do not dismantle, open or shred cells or
battery pack.
b) Do not short-circuit a battery pack. Do
not store battery packs haphazardly in
a box or drawer where they may short-
circuit each other or be short-circuited
by conductive materials. When battery
pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that
can make a connection from one terminal to
another. Shorting the battery terminals together
may cause burns or a fire.
c) Do not expose battery pack to heat or
fire. Avoid storage in direct sunlight.
d) Do not subject battery pack to mechanical
shock.
e) In the event of battery leaking, do not
allow the liquid to come into contact
with the skin or eyes. If contact has
been made, wash the affected area with
copious amounts of water and seek
medical advice.
f) Seek medical advice immediately if a cell
or battery pack has been swallowed.
g) Keep battery pack clean and dry.
h) Wipe the battery pack terminals with a
clean dry cloth if they become dirty.
i) Battery pack needs to be charged before
use. Always refer to this instruction and
use the correct charging procedure.
j) Do not maintain battery pack on charge
when not in use.
k) After extended periods of storage, it may
be necessary to charge and discharge
the battery pack several times to obtain
maximum performance.
l) Battery pack gives its best performance
when it is operated at normal room
temperature (20°C ± 5°C).
m) When disposing of battery packs, keep
battery packs of different electrochemical
systems separate from each other.
n) Recharge only with the charger specified
by WORX. Do not use any charger other
than that specifically provided for use
with the equipment. A charger that is
suitable for one type of battery pack may create
a risk of fire when used with another battery
pack.
o) Do not use any battery pack which is not
designed for use with the equipment.
p) Keep battery pack out of the reach of
children.
q) Retain the original product literature for
future reference.
r) Remove the battery from the equipment
when not in use.
s) Dispose of properly.

Chat with your Worx WX392.9 manual using AI

Get instant AI answers from your Worx WX392.9 manual

Ask anything about the Worx WX392.9. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend WX392.9?

Yes No

Frequently Asked Questions

A

It is intended for hammer drilling and chiseling in concrete, brick, and stone. In drilling-only mode, it can also be used on wood, metal, ceramic, and plastic with the correct bit or adapter.

Is this answer helpful?

A

The tool offers drilling without impact, hammer drilling, chiseling, and bit rotation. Bit rotation is used to set the chisel to a suitable angle before chiseling.

Is this answer helpful?

A

The listed maximum capacities are 26 mm in concrete, 26 mm in wood, and 13 mm in steel. Use the appropriate bit type and avoid forcing the tool.

Is this answer helpful?

A

No. The WX392.9 is the bare-tool version. It is intended for users who already have compatible Worx 20V PowerShare batteries and a suitable charger.

Is this answer helpful?

A

Use SDS-plus tungsten-carbide drill bits for concrete and masonry. For metal, use HSS drill bits in good condition. A compatible SDS keyless chuck adapter may be needed for conventional drilling accessories.

Is this answer helpful?

A

Remove the battery before maintenance. Clean the tool with a dry cloth, keep vents free of dust, and store it in a dry location. Clean and lubricate SDS bits and adapters before inserting them into the holder.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Four operating modes support drilling, hammer drilling, chiseling, and chisel-angle positioning.
  • 2.2 J impact energy and up to 5,000 bpm suit concrete, brick, stone, and tile work.
  • SDS-plus holder enables quick, secure changes of compatible drill bits and chisels.
  • 20V PowerShare compatibility is useful for owners of existing Worx batteries and chargers.
  • Variable-speed trigger, auxiliary handle, depth gauge, and reverse control improve handling.
VS

Disadvantages

  • WX392.9 is supplied as a bare tool, so battery, charger, and some accessories may need separate purchase.
  • Chisels and the SDS keyless chuck adapter are not included with the WX392.9.
  • Extended operation can heat the aluminum housing, requiring care during and after use.
  • Hammer drilling and chiseling generate notable vibration and require suitable protective equipment.
  • The listed 26 mm concrete capacity may not suit heavy-duty, large-diameter professional drilling.
M: gpt-5.6-terra

Product Specification

Type

Rotary hammer/chisel hammer

No-load speed

0-1,200 rpm

No-load impact rate

0-5,000 bpm

Drilling capacity

Steel 0.51 in, wood 1.02 in, concrete 1.02 in

Impact energy

1.62 ft-lb

Tool holder

SDS-plus quick-change chuck

Features

Forward/reverse rotation, speed control, impact rate control, rotation stop, impact stop, LED work light, auxiliary handle, depth stop

Weight

4.63 lb

M: gpt-5.6-terra

Product Description

Worx WX392.9 20V PowerShare Cordless Rotary Hammer - Read, Download & Print Free

The Worx WX392.9 20V PowerShare Cordless Rotary Hammer - Read, Download & Print Free is a versatile cordless tool designed for drilling, hammer drilling, and chiseling tasks around demanding renovation and construction projects. Built around the PowerShare battery platform, it provides cable-free mobility for work in concrete, brick, stone, wood, metal, ceramic, and plastic.

Built for drilling and demolition tasks

With up to 1,200 rpm, an impact rate of up to 5,000 bpm, and 2.2 J of impact energy, this rotary hammer is equipped for common masonry drilling and light chiseling applications. Its maximum drilling capacities are 26 mm in concrete and wood, plus 13 mm in steel. The SDS-plus tool holder supports fast accessory changes and reliable bit retention for hammer drilling work.

The selectable operating modes make the tool adaptable to the material and task. Choose drilling without impact for wood, metal, plastic, or ceramic; select hammer drilling for concrete, brick, and stone; or switch to chiseling for breaking and removal work. A bit-rotation setting helps position a chisel at a suitable working angle before chiseling begins.

Practical handling and control

The WX392.9 includes a variable-speed trigger for measured starts and better control during drilling. Forward and reverse rotation supports bit removal and general operating flexibility, while the center switch-lock position helps prevent accidental starts. An auxiliary handle and adjustable depth gauge support steadier handling and repeatable hole depths.

At approximately 2.1 kg for the WX392.9 machine, the bare-tool version is designed for users who already own compatible Worx 20V PowerShare batteries and chargers. This can be a practical option for expanding an existing cordless setup without paying for duplicate power accessories.

Important operating notes

Use SDS-plus tungsten-carbide bits for concrete and masonry, and use suitable HSS bits for metal. For large holes, a pilot hole can improve accuracy. If the tool becomes hot during extended use, let it run unloaded at maximum speed for two to three minutes to help cool the motor. Remove the battery before changing accessories, adjustments, cleaning, or storage.

Safety and care

Wear eye, hearing, dust, and hand protection as appropriate. Keep the ventilation slots clean, store the tool in a dry place, and clean it with a dry cloth rather than water or chemical cleaners. The SDS bits and adapters should be cleaned and lubricated before insertion. Battery performance is best at normal room temperature, and charging outside 0 C to 30 C can affect performance.

M: gpt-5.6-terra

© Copyright 2026 Manual.ly