Manual.ly Logo

Worx WX354.9 Manual

0.0 · 0 Ratings

PDF manual · 116 Pages

English

M: OA-GPT-5-NAN
page

/ 116

Loading...
9539e2d0e921dd2dfe595fcd38c2b378bcd7 page c
12
20V Brushless Impact Drill EN
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used especially what kind of
workpiece is processed dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration and noise
exposure risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
ACCESSORIES
WX354 WX354.1 WX354.9
Masonry drill
bits
1 1 1
Double ended
bits
1 1 1
Charger 1 (WA3880) 1 (WA3880) /
Battery pack 2 (WA3551)
2 (WA3551 /
WA3553)
/
Belt hook 1 1 1
Bit clip 1 1 1
We recommend that you purchase your accessories
from the same store that sold you the tool. Choose
the type according to the work you intend to
undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for impact drilling in brick,
concrete and stone as well as for drilling in wood,
metal, ceramic and plastic.
ASSEMBLY AND OPERATION
ACTION FIGURE
BEFORE OPERATION
Checking the battery charge
condition
NOTE: Fig. A1 only applies for
the battery pack with battery
indicator light.
See Fig. A1
Removing the battery pack See Fig. A2
Charging the battery See Fig. A3
Installing the battery pack See Fig. A4
ASSEMBLY
CHUCK ADJUSTMENT
WARNING: Always lock off trigger switch and
disconnect tool from power source when
changing accessories. Always ensure the bit is secure
before starting the tool. Damage to the Chuck or a
loose bit may cause possible personal injury.
--Removing the bits See Fig. B1
--Inserting the bits See Fig. B2
Assembling the belt hook and
bit clip
See Fig. C1, C2,
C3, C4
OPERATION
Forward/reverse rotation
control
WARNING: Never
change the direction of
rotation when the chuck is
rotating, wait until it has
stopped!
See Fig. D1, D2,
D3
TWO-SPEED GEAR
CONTROL
See Fig. E

Chat with your Worx WX354.9 manual using AI

Get instant AI answers from your Worx WX354.9 manual

Ask anything about the Worx WX354.9. Answers come from this manual, with the pages they are based on.

WX354.9 Maintenance Schedule

As needed
Clean motor ventilation slots

Keep motor ventilation slots clean to prevent overheating. Occasional sparks visible through slots are normal.

Show in the manual (page 12)
As needed
Clean working controls

Keep all working controls free of dust and debris to ensure safe operation.

Show in the manual (page 12)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend WX354.9?

Yes No

Frequently Asked Questions

A

The WX354.9 is designed for screwdriving, conventional drilling in wood, metal, ceramic and plastic, and hammer/impact drilling in masonry, brick, concrete and stone.

Is this answer helpful?

A

Use Worx PowerShare batteries specified for the WX354 series (nominal 18V, max 20V initial). Recharge only with the charger recommended by Worx (e.g., WA3880). Using non-specified chargers or batteries can create fire or damage risks.

Is this answer helpful?

A

Avoid charging outside recommended temperatures (0–40 °C), store batteries dry, avoid prolonged storage at low charge, cycle charge/discharge occasionally after long storage, and keep a spare battery for heavy workloads to minimize downtime.

Is this answer helpful?

A

Always wear eye protection and ear protection during impact drilling, avoid wet conditions, keep bystanders clear, secure drill bits tightly, and use dust extraction where available. Follow torque and speed guidance to prevent kickback or bit bending.

Is this answer helpful?

A

Minimal maintenance: remove the battery before service, keep ventilation slots and controls free of dust, wipe with a dry cloth, do not use water or solvents, and have servicing performed by qualified technicians using identical replacement parts.

Is this answer helpful?

A

Rapid LED flashing for 60 seconds then cut-off indicates the tool’s protection system triggered due to overload, overheating, or low battery. Release the trigger, allow cooling or recharge the battery before resuming.

Is this answer helpful?

A

Specifications list a 13 mm chuck, max drilling capacities: steel 13 mm, wood 40 mm, brick 16 mm, concrete 10 mm, and a maximum torque of 60 N·m with 18+1+1 clutch settings for controlled fastening.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Brushless 20V motor for improved efficiency, longer runtime and less maintenance.
  • Two-speed gearbox and 18+1+1 clutch settings provide versatile control for screwdriving, drilling, and hammer drilling.
  • Lightweight WX354.9 variant (~1.4 kg) improves handling in overhead and tight-space tasks.
  • Integrated protection system cuts power for overload, overheating, or low battery to extend battery life and safety.
  • PowerShare battery compatibility lets you use the same batteries across Worx tools for convenience.
VS

Disadvantages

  • Noise level is relatively high (LpA 88.4 dB(A)); hearing protection required for impact drilling.
  • Vibration during hammer drilling can be significant (ah,ID ~10.204 m/s²); prolonged use may risk hand-arm vibration exposure.
  • Battery runtime depends on working conditions; heavy tasks drain batteries quickly and may require spare packs.
  • Charging and storage require adherence to temperature limits (0 °C–40 °C) to avoid reduced battery performance.
  • Some accessories shown may not be included in standard delivery—verify kit contents before purchase.
M: OA-GPT-5-NAN

Product Specification

Type

Impact drill driver

No-load speed

0-600/0-2000/min

No-load impact rate

0-1800/0-6000/min

Drilling capacity

Wood 1.57in, Steel 0.51in, Concrete 0.51in, Masonry 0.63in

Torque

20 levels (18+2)

Tool holder

0.51in keyless chuck

Features

Right/left rotation, Speed control, Impact rate control, Multi-gear, Torque preselection, Charge status indicator, Impact stop, LED work light, Soft grip, Brushless motor, Belt clip, Overload protection

Weight

3.97 lb

M: OA-GPT-54-NAN

Product Description

Worx WX354.9 PowerShare Cordless Hammer Drill Driver

The Worx WX354.9 PowerShare Cordless Hammer Drill Driver is a compact, brushless 20V drill designed for versatile home and light-professional use. Built on the PowerShare battery platform, the WX354.9 delivers the convenience of cordless operation combined with hammer-drill capability for masonry and standard drilling tasks. Its brushless motor improves efficiency and runtime while reducing maintenance compared with brushed motors.

Design and performance

With a two-speed gearbox and a no-load speed range of 0–600 / 0–2000 rpm and impact rates up to 0–6000 bpm, the WX354.9 adapts to screwdriving, drilling, and hammer-drilling demands. The drill offers 18+1+1 clutch settings and a maximum torque of 60 N·m for controlled fastening. A 13 mm chuck accepts common bits, and the machine’s lightweight construction (around 1.4 kg for WX354.9) improves maneuverability for overhead and tight-space jobs.

Battery, protection and indicators

Powered by Worx PowerShare batteries (nominal 18V, max 20V initial), the WX354.9 includes integrated battery protection systems that cut power under overload, overheating or low-voltage conditions. An LED work light activates when the trigger is depressed and auto-off features preserve battery life. Battery charge indicators and guidance on charging temperature ranges help maintain battery health.

Usability and safety

Controls include forward/reverse selector, two-speed gear control, function mode selector (screwdriving/drilling/hammer drilling), torque adjustment ring, and a soft-grip handle for better control. Safety guidance highlights ear and eye protection, avoiding wet conditions, correct battery and charger use, and proper handling to minimize vibration exposure. Noise (LpA 88.4 dB(A)) and vibration values are provided for informed use and PPE selection.

Accessories and maintenance

Typical kit items include masonry bits, double-ended bits, charger (WA3880), battery packs (WA3551/WA3553 variants), belt hook, and bit clip. Routine maintenance is minimal: keep vents clean, wipe tool dry, and follow battery storage and charging recommendations. The tool is covered by conformity declarations to relevant EU directives and standards.

Notes

  • Intended for drilling in wood, metal, ceramic and impact drilling in brick, concrete and stone.
  • Observe torque settings: low positions for screwdriving, high for heavy fastening; specific positions for drilling and hammer drilling.
  • Follow battery charge temperature limits (recommended 0 °C–40 °C during charging).
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly