Manual.ly Logo

Worx WX291.9 Manual

0.0 · 0 Ratings

PDF manual · 100 Pages

English

M: gpt-5.6-terra
page

/ 100

Loading...
0ecc4d2356d133d33e777e6be982e0dde3d9 page 7
7
Lithium-Ion Cordless Impact Driver EN
PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool.
Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts.
Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk of
electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A
moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection.
Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool.
Carrying power tools with your
finger on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts.
Loose clothes, jewellery or long hair
can be caught in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of
dust collection can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles.
A careless action can
cause severe injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power
tool will do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Power tools are dangerous
in the hands of untrained users.
e) Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking
into account the working conditions and the

Chat with your Worx WX291.9 manual using AI

Get instant AI answers from your Worx WX291.9 manual

Ask anything about the Worx WX291.9. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend WX291.9?

Yes No

Frequently Asked Questions

A

The WX291.9 is intended for tightening and loosening screws, bolts, nuts, and other threaded fasteners. It is an impact driver with a 6.35 mm hex collet and is not designed to be used as a drill.

Is this answer helpful?

A

No. The WX291.9 solo version is supplied without a battery and charger. It is suited to users who already own compatible Worx 20V PowerShare batteries and charging equipment.

Is this answer helpful?

A

It delivers a maximum torque of 170 Nm. This output, combined with its impact mechanism, helps with tougher fastening jobs and resistant threaded fasteners.

Is this answer helpful?

A

The tool uses compatible Worx 20V PowerShare lithium-ion battery packs. Use only battery packs and chargers specified by Worx for safe operation and reliable performance.

Is this answer helpful?

A

The WX291.9 has a variable no-load speed of 0 to 2,600 rpm and an impact rate of 0 to 3,300 bpm. Trigger pressure lets the user adjust speed for the task.

Is this answer helpful?

A

A quickly flashing LED can indicate overload, overheating, or low battery voltage. Release the trigger, reduce the load if necessary, allow the tool and battery to cool, or recharge the battery.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Delivers up to 170 Nm of torque for demanding fastening and loosening work.
  • Variable-speed trigger, 2,600 rpm, and 3,300 bpm offer controlled, high-impact performance.
  • Light 1.09 kg solo-tool weight supports easier handling in confined or overhead spaces.
  • Compatible with the Worx 20V PowerShare battery platform for cross-tool flexibility.
  • Includes useful convenience features such as LED light, belt hook, and bit clip.
VS

Disadvantages

  • Solo version does not include a battery or charger.
  • Designed for fastening, not drilling.
  • Uses a 6.35 mm hex collet, so it requires compatible driver bits and adapters.
  • Noise and vibration levels mean hearing protection and sensible work scheduling are important.
M: gpt-5.6-terra

Product Specification

Type

Impact driver

Battery

20 V, lithium-ion

No-load speed

0-2,600 rpm

No-load impact rate

0-3,300 rpm

Torque

125.38 lb-ft

Tool holder

1/4" bit holder

Features

Forward/reverse, speed control, impact rate control, multi-speed, torque preselection, LED work light, soft grip, belt clip

Weight

3.20 lb (without battery)

Package contents

Without charger and battery, includes driver bit

M: gpt-5.6-terra

Product Description

Worx WX291.9 20V PowerShare Cordless Impact Wrench Solo

The Worx WX291.9 20V PowerShare cordless impact wrench solo is a compact, battery-powered fastening tool designed for demanding screwdriving and fastening jobs. Although it is often searched for as an impact wrench, its 6.35 mm hex collet and included PH2 bit position it as an impact driver for screws, bolts, nuts, and threaded fasteners. It is not intended for drilling.

With up to 170 Nm of maximum torque, the WX291.9 delivers strong turning force in a lightweight format. Its variable-speed trigger provides control from 0 to 2,600 rpm, while a maximum impact rate of 3,300 bpm helps tackle resistant or long fasteners. This combination makes it a practical choice for assembly work, deck building, furniture installation, and general repair tasks where a standard drill driver may struggle.

The solo configuration is particularly useful for existing Worx PowerShare owners. It accepts compatible 20V PowerShare lithium-ion batteries, allowing users to share batteries across suitable Worx tools. Please note that the WX291.9 solo version is supplied without a battery or charger, so these need to be purchased separately if they are not already available.

Everyday Handling and Features

At approximately 1.09 kg without the battery, the tool is built for convenient handling during overhead work or longer jobs. A soft-grip handle supports secure control, while the forward, reverse, and lock selector makes it simple to tighten or remove fasteners. The integrated LED work light activates with a light press of the trigger and turns off automatically shortly after use, improving visibility in cabinets, corners, and other dim work areas.

A belt hook and bit clip add practical convenience, keeping the driver close at hand and a spare bit accessible. The quick-release collet is designed for straightforward bit changes, helping users move efficiently between fastening tasks.

Protection and Responsible Use

The tool and battery system include protection against overload, overheating, and low battery voltage. A flashing LED can indicate that the system has stopped operation to protect the equipment. Release the trigger, remove the cause of overload where necessary, and allow the tool or battery to cool before restarting.

Always wear eye and hearing protection, use insulated gripping surfaces where hidden wiring may be present, and remove the battery before adjustments or maintenance. Keep the tool dry, clean it with a dry cloth, and recycle electrical equipment and batteries through appropriate local facilities.

Notes

  • Use only Worx-specified compatible batteries and chargers.
  • Charge batteries between 0 C and 40 C for best performance.
  • Worx WX291.9 20V PowerShare cordless impact wrench solo - Read, Download & Print Free.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly