Manual.ly Logo

Worx WX092.9 Manual

0.0 · 0 Ratings

PDF manual · 92 Pages

English

M: OA-GPT-5-NAN
page

/ 92

Loading...
f122b4a8a1021e7803b5848e55998aba7a2a page 8
8
20V Multi-Function Inflator EN
10.Before each use, check
the device. If damage
is detected, do not use
the device. Have repairs
performed only by a queried
technician. Never open the
device yourself.
11. The device produces a high
pressure. Do not direct
the air outlet at persons or
animals.
12.Remain alert at all times!
Never use the appliance
when you are distracted or
do not feel well
13.High pressure air could
result in death or serious
injury. Never operate
above maximum operating
pressure. Do not operate with
pressure switch or safety
valve set above maximum
allowable working pressure.
14.Inhalation hazard. Using
pump to supply breathing
air could result in death or
serious injury. Do not use
pump to supply breathing
air.
15.The equipment and
packaging material are not
toys. Do not let children
play with plastic bags, foils
or small parts. There is a
danger of swallowing or
suffocating.
SAFETY WARNING FOR LED
LAMP
WARNING The LED lamp
equipped with power
tool is in the Exempt Group.
In order to avoid the viewer-
related risk, operator shall be
more careful and read all safety
warnings and all instructions.
Failure to follow the warnings
and instructions may result in
optical injuries.
How to avoid exposure
hazard
With increasing distance from
a lamp the applicable hazard
values decrease - see Figure 1.
At the distance X1, EHV = 1, i.e.
the EHV equals the applicable
emission limit value. Distance X1
is the hazard distance (HD) for
this lamp system. At distance
X2, the optical radiation hazard
value exceeds the applicable
emission limit value by a factor
of A. At this distance, excessive
exposure to optical radiation
may be reduced either by
restricting exposure time by
a factor of A (if the emission
limit values are expressed in
terms of radiant exposure or
time integrated radiance), or
by using engineering controls
(such as filters) which attenuate

Chat with your Worx WX092.9 manual using AI

Get instant AI answers from your Worx WX092.9 manual

Ask anything about the Worx WX092.9. Answers come from this manual, with the pages they are based on.

WX092.9 Maintenance Schedule

Before each use
Check device for damage

Inspect the device before every use. If damage is found, do not use it and have repairs done by a qualified technician.

After use or as needed
Clean with dry cloth

Wipe clean with a dry cloth only. Never use water or chemical cleaners.

Show in the manual (page 11)
During storage
Store in dry place

Always store the tool in a dry location to prevent damage.

Show in the manual (page 11)
During operation
Keep ventilation slots clean

Ensure motor ventilation slots remain free of dust and debris during dusty work.

Show in the manual (page 11)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend WX092.9?

Yes No

Frequently Asked Questions

A

The unit is designed for Worx 20V PowerShare batteries (nominal 18V, peak 20V). Battery models include WA3550, WA3551, WA3553, etc. Batteries and charger may be sold separately; check the product listing for included items.

Is this answer helpful?

A

Maximum working pressure is rated up to 8 bar (120 psi) for typical operation with a documented maximum of 10 bar (150 psi). Avoid continuous operation longer than about 2.5 minutes at high pressure; allow cooling for at least 7.5 minutes to prevent overheating.

Is this answer helpful?

A

No. The WX092.9 is intended for small-to-medium inflation tasks—car, bike, sports and inflatables. Do not use it for truck, tractor or other large tires beyond the pump’s permissible output range.

Is this answer helpful?

A

Use the increase/decrease pressure buttons to set the target value; press both increase and decrease simultaneously to cycle units between PSI, BAR, kPa and kg/cm². Press Start/Stop to begin inflation; the tool auto-stops at the preset pressure.

Is this answer helpful?

A

The inflator includes an automatic battery protection system that shuts off for overload or low battery, an auto-stop feature at target pressure, warnings about run-time to avoid overheating, and guidance to avoid directing high-pressure air at people or animals.

Is this answer helpful?

A

Minimal maintenance is needed: remove the battery before any service, keep ventilation slots clean, wipe with a dry cloth—do not use water or chemical cleaners. There are no user-serviceable internal parts.

Is this answer helpful?

A

Yes. The unit has a built-in LED work light with a selectable SOS emergency mode. Avoid looking directly into the lamp to prevent optical exposure risks.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Cordless 20V PowerShare compatibility lets you swap batteries across Worx tools for convenience.
  • Digital pressure control and auto-stop when preset pressure is reached for accurate inflation.
  • Compact, lightweight (≈0.95 kg bare tool) and includes adapters for cars, bikes, balls and inflatables.
  • Built-in LED work light with SOS mode provides added roadside utility and visibility.
  • Battery protection system cuts power on overload or low voltage to protect tool and battery.
VS

Disadvantages

  • Not intended for heavy-duty tires like trucks or tractors; limited output range for large tires.
  • High-pressure continuous use is restricted—may overheat if run more than ~2.5 minutes at 8 bar.
  • Works only with compatible 20V Worx batteries; battery sold separately if not owning PowerShare.
  • Some accessories illustrated may not be included with every unit; check package contents.
  • Not waterproof—must be protected from moisture and stored in a dry place.
M: OA-GPT-5-NAN

Product Specification

Battery

20V, Li-Ion

Max. pressure

145.04 psi

Special features

oil-free pump, pressure regulator, carrying handle, LED work light

Weight

1.76 lb (without battery)

Scope of delivery

without charger and battery, incl. accessory set

M: OA-GPT-54-NAN

Product Description

Worx WX092.9 PowerShare Battery Compressor solo — Portable 20V Inflator

The Worx WX092.9 PowerShare Battery Compressor solo is a compact, cordless 20V multi-function inflator designed for on-the-go inflation tasks. Lightweight and battery-powered, it combines a digital pressure gauge, LED work light with SOS mode, and multiple adapter fittings to handle car tires, bike tires (including Presta valves), sports balls and inflatables. Built to the PowerShare ecosystem, the unit accepts 20V Worx batteries (nominal 18V, peak 20V) so users can swap batteries with other Worx tools for convenient cordless operation.

Compact but capable, the WX092.9 offers fast inflation performance for normal passenger tires (quoted 0–2.4 bar for a 215/55R17 in roughly 4 minutes) and a maximum working pressure rated up to 8 bar (120 psi) with a higher absolute maximum of 10 bar (150 psi). The inflator features an intuitive control panel with increase/decrease buttons to set the target pressure, a Start/Stop button that automatically halts inflation when the preset pressure is reached, and a unit-change shortcut for PSI/BAR/kPa/kg/cm2. A built-in hose, adapter holder and included accessories (tapered adapter, ball needle, Presta adapter) make setup and storage straightforward.

Safety and practicality are emphasized: an automatic battery protection system stops the tool on overload or low battery, the manual warns against continuous operation beyond short bursts (avoid more than 2.5 minutes at high pressure; allow cooling) and stresses not to exceed intended pressure for objects to prevent bursting. The bright LED work light doubles as an SOS emergency signal but should not be viewed directly. Serviceable maintenance is minimal — keep vents clean, avoid moisture, and store dry.

Who this suits: drivers, cyclists, outdoor enthusiasts and homeowners who want a portable, battery-powered inflator that integrates with Worx PowerShare batteries. It’s ideal for routine tire top-ups, sports equipment and small inflatables, and offers the convenience of cordless operation without sacrificing pressure control.

Notes:

  • Designed for small-to-medium inflation tasks; not suitable for truck/tractor tires or continuous high-pressure professional use.
  • Observe cooling intervals and do not exceed recommended run times at high pressure to avoid overheating.
  • Recycle batteries and electronic waste responsibly.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly