Manual.ly Logo

Worx WG894E Manual

0.0 · 0 Ratings

PDF manual · 128 Pages

English

M: QW-35-FL
page

/ 128

Loading...
4f55d8167783504be9e279c30ffa47d334f2 page 5
5
Cordless Li-Ion handy saw
EN
1. LOCK-OFF BUTTON
2. HANDLE
3. BATTERY PACK
4. BATTERY PACK RELEASE LATCH
5. ON/OFF SWITCH
6. TOOL-FREE BLADE CLAMP LEVER
7. PRUNING BLADE *
8. BI METAL BLADE *
9. STEEL BASE
*Not all the accessories illustrated or described are included in standard delivery.
TECHNICAL DATA
Type WG894E WG894E.5 WG894E.9 (890-894 designation of machinery,
representative of Handy Saw)
NOISE INFORMATION
A weighted sound pressure L
pA
: 84dB(A) K
pA
: 3.0dB(A)
A weighted sound power L
wA
: 95dB(A) K
wA
: 3.0dB(A)
Wear ear protection when sound pressure is over 80dB(A)
WG894E WG894E.5 WG894E.9
Voltage 20V Max* Lithium
No load speed 2200/min
Stroke length 16mm
Max. cutting capacity
Wood Ø60mm
Steel Ø10mm
Normal charging time 5hr approx. 1hr approx.
/
Machine weight 1.3kg 1.3kg 1kg
*Voltage measured without workload. Initial battery voltage reaches maximum of 20
Volts. Nominal voltage is 18 Volts.

Chat with your Worx WG894E manual using AI

Get instant AI answers from your Worx WG894E manual

Ask anything about the Worx WG894E. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend WG894E?

Yes No

Frequently Asked Questions

A

This reciprocating saw can cut wood up to 60mm in diameter, steel up to 10mm, plastic, and soft building materials. It comes with specific blades optimized for pruning branches and cutting metal.

Is this answer helpful?

A

The battery pack is often included depending on the specific kit version (WG894E vs WG894E.5). However, the charger is also required for operation. Always check the specific product listing to confirm what is in the box.

Is this answer helpful?

A

Charging time varies by model. Some versions require approximately 5 hours for a full charge, while others with faster chargers may take around 1 hour. The battery is protected against deep discharging.

Is this answer helpful?

A

No, you should only use WORX 20V PowerShare batteries. Using incompatible batteries can create risks of injury, fire, or damage to the tool and voids the warranty.

Is this answer helpful?

A

The manual describes a standard on/off switch with a lock-off button. It does not explicitly mention a variable speed trigger, though pressure applied can influence cutting speed slightly.

Is this answer helpful?

A

You should always wear eye protection, hearing protection since noise levels exceed 80dB(A), and a dust mask. Wear protective gloves when changing blades and avoid loose clothing.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Tool-free blade change system for quick swaps
  • Lock-off switch prevents accidental starting
  • Compatible with 20V PowerShare battery system
  • Lightweight at approximately 1.3kg for easy handling
  • Effective for both wood pruning and light metal cutting
VS

Disadvantages

  • High vibration levels may cause hand-arm fatigue
  • Battery and charger sold separately for some models
  • Maximum cutting capacity limited to 60mm wood
  • No variable speed trigger control mentioned
  • Pruning blade may chip upper surfaces if not careful
M: QW-35-FL

Product Specification

Type

Reciprocating saw

No-load stroke rate

2200/min

Cutting performance

Wood 60mm, Steel 10mm

Stroke length

0.63 in

Tool holder

Quick-change system

Features

Softgrip

M: QW-35-FL

Product Description

Worx WG894E 20V PowerShare Reciprocating Saw Review

The Worx WG894E 20V PowerShare Reciprocating Saw is a versatile cordless tool designed for gardeners and DIY enthusiasts who need reliable cutting power without the restriction of a cable. This handy saw operates on a 20V Max Lithium battery system, offering significant mobility for tackling pruning tasks or cutting through various materials around the home. With a no-load speed of 2200 strokes per minute and a stroke length of 16mm, it delivers efficient performance for wood up to 60mm in diameter and steel up to 10mm.

One of the standout features of this tool is its user-friendly design. The lock-off button prevents accidental starts, ensuring safety during transport and storage. The tool-free blade clamp lever allows for quick and easy blade changes, letting you switch between the included pruning blade for garden limbs and the bi-metal blade for metal or wood projects in seconds. The ergonomic handle provides a comfortable grip, reducing fatigue during extended use.

When using the Worx WG894E, always ensure the workpiece is securely clamped to prevent movement, which can affect cut quality and safety. The steel base plate offers stability against the material being cut. For tree trimming, hold the base firmly against the branch to minimize vibration and movement. When cutting thin sheet metals, clamping both sides with wood helps reduce tearing and excessive vibration.

Maintenance is straightforward as the tool requires no lubrication. Simply wipe it clean with a dry cloth and store it in a dry place. Always remove the battery pack before performing any maintenance or adjustments. Remember that the battery must be charged before first use and should only be charged with the specified WORX charger to ensure safety and longevity.

Important Notes

  • Always wear eye protection, hearing protection, and a dust mask when operating.
  • Do not expose the tool to rain or water.
  • Keep the battery away from children and do not short-circuit the terminals.
  • Dispose of batteries according to local recycling regulations.
M: QW-35-FL

© Copyright 2026 Manual.ly