Manual.ly Logo

Worx WG737E Manual

0.0 · 0 Ratings

PDF manual · 204 Pages

English

M: OA-GPT-5-NAN
page

/ 204

Loading...
e4ec24e2086256fe502c9a5991d3923b4248 page 10
16
Cordless Brushless Push Lawn Mower EN
REPLACE BENT OR DAMAGED BLADE IMMEDIATELY.
WHEN SHARPENING THE BLADE:
1. Make sure blade remains balanced.
2. Sharpen blade at the original cutting angle.
3. Sharpen cutting edges on both ends of blade, removing equal amounts of material from both ends.
NOTE:
1.
Be sure the mower is turned off.
2. Place the mower in stand up storage mode.
TO SHARPEN BLADE IN A VISE (SEE Fig. J)
1. Be sure the switch lever is released, the blade has stopped before removing the blade.
2. Remove blade from mower. See instructions for removing and attaching blade.
3. Secure blade J-1 in a vise J-2.
4. Wear safety glasses and be careful not to cut yourself.
5. Carefully le the cutting edges of the blade with a ne tooth le J-3 or sharpening stone.
6. Check balance of blade. See instructions for blade balancing.
7. Replace blade on mower and tighten securely. Refer to instructions below.
BLADE BALANCING (See Fig. K)
Check balance of blade by placing center hole in blade K-1 over a screwdriver shank K-2, clamped horizontally in
a vise K-3. If either end of the blade rotates downward, le that end. Blade is properly balanced when neither end
drops.
BLADE MAINTENANCE (See Fig. L1, L2)
Renew your metal blade after 50 hours mowing or 2 years, whichever is the sooner-regardless of condition.
Follow these procedures to remove and replace the blade. You will need garden gloves (not provided) and
a spanner wrench (not provided) to remove the blade. Hold the blade (21) and unscrew the blade bolt (20)
counter-clockwise using a spanner wrench, and then remove blade.
To re-assemble, position the blade (21) with the cutting edges towards the ground. Then securely tighten the
blade bolt (20).
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed of with household waste. Please recycle where facilities ex-
ist. Check with your local authorities or retailer for recycling advice.
FOR BATTERY TOOLS
The ambient temperature range for the use and storage of tool and battery is 0 °C-45 °C.
The recommended ambient temperature range for the charging system during charging is 0 °C-40 °C.
Details regarding safe disposal of used batteries
At the end of the life of the appliance, remove the battery pack safely before disposing of the appliance. Do not
throw batteries away or throw them in the normal trash can. Also do not dispose of the battery with the machine.
Remove the used battery pack from the appliance and dispose of it at the nearest or convenient dedicated recycling
facility. If in doubt, consult your local environmental protection department. Batteries may enter water cycle if
disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted
municipal waste.
7. TROUBLESHOOTING
WARNING: SWITCH THE MACHINE OFF AND REMOVE THE BATTERY PRIOR TO ANY
TROUBLESHOOTING.

Chat with your Worx WG737E manual using AI

Get instant AI answers from your Worx WG737E manual

Ask anything about the Worx WG737E. Answers come from this manual, with the pages they are based on.

WG737E Maintenance Schedule

Remind me when maintenance is due
Every 50 hours
Sharpen blade

Sharpen the blade twice during a mowing season or more often if cutting sandy soil. Always wear eye protection.

Show in the manual (page 15)
Yearly
Replace metal blade

Replace the metal blade after 50 hours of mowing or every 2 years, whichever comes first, regardless of condition.

Show in the manual (page 16)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend WG737E?

Yes No

Frequently Asked Questions

A

Use two identical 20V PowerShare batteries—recommended models WA3014 or WA3644 (4.0 Ah). The compatible charger is WA3772 (2.0 A). Always charge both batteries fully at the same time and use the Worx-specified charger.

Is this answer helpful?

A

To start: insert two fully charged batteries, press and hold the lock-off button, then pull the switch lever. To stop: release the switch lever. Always ensure the blade has stopped and remove batteries before maintenance.

Is this answer helpful?

A

The mower has a 37 cm cutting width and six cutting-height positions adjustable from 20 mm to 70 mm, allowing selection for short lawns, thicker grass or higher cut for turf health.

Is this answer helpful?

A

Keep the blade sharp—sharpen about twice per season or more on sandy lawns. Balance the blade after sharpening and replace the metal blade after 50 hours or two years. Regularly clean the underside of the deck and remove debris from air inlets.

Is this answer helpful?

A

Flashing patterns indicate conditions: two flashes = deep discharged battery; three flashes = battery overheated; four flashes = machine overloaded. No lights may mean a battery isn't seated or is defective.

Is this answer helpful?

A

Avoid excessively steep slopes and do not mow on wet grass. Mow across slopes (not up/down) and exercise extreme caution changing direction. Wet grass can clog the deck and reduce cutting and collection efficiency.

Is this answer helpful?

A

Clean the machine thoroughly (no water or solvents), remove batteries and store both mower and batteries in a dry place within recommended temperature ranges (tool/battery 0°C–45°C). Fold the handle for compact storage and recharge/discharge batteries occasionally during long storage.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Brushless motor with cordless convenience for quieter, efficient mowing and longer motor life.
  • Dual 20V battery system (40V max) provides balanced power and runtime; recommended 4.0 Ah batteries included.
  • 37 cm cutting width and six height positions (20–70 mm) suit typical domestic lawns.
  • 40 L grass collection bag plus mulching insert gives flexible grass management options.
  • Foldable handle, LED battery indicator and straightforward controls for easy storage and use.
VS

Disadvantages

  • Requires two identical batteries—performance limited if batteries differ in charge or capacity.
  • Machine weight (~14 kg bare) may be heavy for some users to lift when servicing or storing.
  • Not suitable for very large lawns or heavy professional use where extended runtime is vital.
  • Performance reduced on overly wet grass; frequent maintenance (cleaning, sharpening) required.
  • Noise and vibration still significant (LwA 92.4 dB(A)); hearing protection recommended.
M: OA-GPT-5-NAN

Product Specification

Type

Lawn Mower

Battery

2x Battery (40V, 4.0Ah, Li-Ion)

Working Width

14.57in

Working Height

1.18-2.76in, height adjustable, 6 levels

Recommended Lawn Area

up to 5,381.95sq ft

Catch Volume

10.57gal

Drive

no

Features

Rear discharge, charge status indicator, brushless motor, manual box emptying

Noise Level

96dB(A)

Weight

33.72lbs

Scope of Delivery

Charger, 2x battery, grass catcher

M: OA-GPT-54-NAN

Product Description

Worx WG737E 20V PowerShare Cordless Lawn Mower incl. 2x Battery 4.0Ah Manual

The Worx WG737E 20V PowerShare cordless lawn mower is a brushless, battery-powered push mower designed for domestic lawns. Powered by two 20V (40V max) Li‑Ion batteries, the mower delivers quiet, efficient mowing with a 37 cm cutting width and six cutting-height positions from 20 to 70 mm. Its brushless motor and dual-battery setup aim to balance power, runtime and durability while keeping operation cordless and convenient.

As a practical backyard tool, the WG737E combines a 40 L grass collection bag, mulching insert and a straightforward LED battery-status indicator so you can monitor remaining charge. The mower weighs about 14 kg (bare tool) and uses front 150 mm and rear 200 mm wheels for maneuverability. Recommended batteries include 20V WA3014 or WA3644 (4.0 Ah) and the WA3772 (2.0 A) charger.

Operation is simple: insert two identical fully charged batteries, press the lock‑off button and pull the switch lever to start; release the lever to stop. The mower features an easily adjustable single-point cutting-height knob, foldable handles for compact storage, and safety features such as a safety flap, blade bolt retention and clear warnings to keep bystanders away. The LED battery indicator shows five green lights for fully charged packs and various flashing patterns for low, hot, overloaded or improperly seated batteries.

Maintenance guidance in the manual emphasizes blade sharpening, balancing and replacement, regular cleaning of the deck and air inlets, and proper battery care. Blade sharpening twice per season is typical, with replacement recommended after 50 hours or two years. The manual also covers storage tips: clean debris, avoid water or solvents, fold the handle and store in a dry place.

Safety and environmental notes are prominent: wear eye and hearing protection, avoid mowing wet grass or steep slopes, remove debris from the mowing area, disconnect batteries before maintenance, and recycle batteries and electrical waste properly. Noise and vibration data (LpA 79.5 dB(A), LwA 92.4 dB(A), typical vibration <2.5 m/s²) are provided along with conformity and certification details.

Whether you need reliable cordless performance or a user-friendly, low-maintenance mower for regular lawn upkeep, the Worx WG737E with two 4.0 Ah batteries offers a balanced solution for suburban and small‑to‑medium lawns.

Notes

  • Always use two identical, fully charged batteries for best performance and to avoid reduced runtime.
  • Inspect the cutting area and remove debris before mowing to prevent thrown objects and damage.
  • Follow battery charging temperature limits and use only the recommended charger.
  • Recycle batteries and electrical waste according to local regulations.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly